 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
Re: [hylafax-users] Fax stopped working
- To: Ross Boylan <RossBoylan@stanfordalumni.org>
- Subject: Re: [hylafax-users] Fax stopped working
- From: Ross Boylan <RossBoylan@stanfordalumni.org>
- Cc: hylafax-users@hylafax.org
- Date: Thu, 17 Jul 2003 11:13:28 -0700
Guilio and Lee, thank you for your rapid responses. I guess my next modem will not be USR! It's funny, my previous understanding was they had a very high quality reputation. Anyway, I upped the session tracing and left everything else as it was (Class 2.0) in the interest of controlled experiment. I sent a test message to another number, and it worked. Then I retried the number that failed, and got this log. Does it mean anything to you? P.S. Do I need to force hylafax to reload after changing the config parameters, or does it read them afresh each time? The log ends with the no response to MPS. Jul 17 11:07:46.16: [19824]: SESSION BEGIN 00000074 14154766153 Jul 17 11:07:46.16: [19824]: HylaFAX (tm) Version 4.1.1 Jul 17 11:07:46.16: [19824]: SEND FAX: JOB 61 DEST 476-6153 COMMID 00000074 DEVICE '/dev/ttyS2' Jul 17 11:07:46.16: [19824]: MODEM set DTR OFF Jul 17 11:07:46.16: [19824]: DELAY 75 ms Jul 17 11:07:46.24: [19824]: MODEM set DTR ON Jul 17 11:07:46.24: [19824]: DELAY 2600 ms Jul 17 11:07:48.84: [19824]: MODEM set baud rate: 38400 baud, input flow RTS/CTS, output flow RTS/CTS Jul 17 11:07:48.84: [19824]: MODEM flush i/o Jul 17 11:07:48.84: [19824]: <-- [4:ATZ\r] Jul 17 11:07:48.97: [19824]: --> [2:OK] Jul 17 11:07:48.97: [19824]: DELAY 3000 ms Jul 17 11:07:51.97: [19824]: <-- [5:ATE0\r] Jul 17 11:07:52.10: [19824]: --> [4:ATE0] Jul 17 11:07:52.10: [19824]: --> [2:OK] Jul 17 11:07:52.10: [19824]: <-- [5:ATV1\r] Jul 17 11:07:52.23: [19824]: --> [2:OK] Jul 17 11:07:52.23: [19824]: <-- [7:ATQ0X4\r] Jul 17 11:07:52.36: [19824]: --> [2:OK] Jul 17 11:07:52.36: [19824]: <-- [7:ATS0=0\r] Jul 17 11:07:52.49: [19824]: --> [2:OK] Jul 17 11:07:52.49: [19824]: <-- [7:ATS8=2\r] Jul 17 11:07:52.62: [19824]: --> [2:OK] Jul 17 11:07:52.62: [19824]: <-- [8:ATS7=60\r] Jul 17 11:07:52.75: [19824]: --> [2:OK] Jul 17 11:07:52.75: [19824]: <-- [12:AT&H1&I0&R2\r] Jul 17 11:07:52.89: [19824]: --> [2:OK] Jul 17 11:07:52.89: [19824]: <-- [11:ATS13=1&D2\r] Jul 17 11:07:53.02: [19824]: --> [2:OK] Jul 17 11:07:53.02: [19824]: <-- [6:AT&C1\r] Jul 17 11:07:53.15: [19824]: --> [2:OK] Jul 17 11:07:53.15: [19824]: <-- [14:AT+FCLASS=2.0\r] Jul 17 11:07:53.28: [19824]: --> [2:OK] Jul 17 11:07:53.28: [19824]: <-- [9:AT+FLO=2\r] Jul 17 11:07:53.42: [19824]: --> [2:OK] Jul 17 11:07:53.42: [19824]: <-- [9:AT+FPP=0\r] Jul 17 11:07:53.56: [19824]: --> [2:OK] Jul 17 11:07:53.56: [19824]: <-- [9:AT+FBO=0\r] Jul 17 11:07:53.69: [19824]: --> [2:OK] Jul 17 11:07:53.69: [19824]: <-- [10:AT+FCT=30\r] Jul 17 11:07:53.83: [19824]: --> [2:OK] Jul 17 11:07:53.83: [19824]: <-- [15:AT+FNR=1,1,1,0\r] Jul 17 11:07:53.97: [19824]: --> [2:OK] Jul 17 11:07:53.97: [19824]: <-- [9:AT+FIE=0\r] Jul 17 11:07:54.10: [19824]: --> [2:OK] Jul 17 11:07:54.10: [19824]: <-- [9:AT+FBU=0\r] Jul 17 11:07:54.23: [19824]: --> [2:OK] Jul 17 11:07:54.23: [19824]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r] Jul 17 11:07:54.37: [19824]: --> [2:OK] Jul 17 11:07:54.37: [19824]: <-- [5:ATM1\r] Jul 17 11:07:54.50: [19824]: --> [2:OK] Jul 17 11:07:54.50: [19824]: STATE CHANGE: RUNNING -> SENDING Jul 17 11:07:54.50: [19824]: MODEM input buffering enabled Jul 17 11:07:54.50: [19824]: <-- [14:AT+FCLASS=2.0\r] Jul 17 11:07:54.74: [19824]: --> [2:OK] Jul 17 11:07:54.74: [19824]: <-- [9:AT+FLO=2\r] Jul 17 11:07:54.97: [19824]: --> [2:OK] Jul 17 11:07:54.97: [19824]: <-- [9:AT+FPP=0\r] Jul 17 11:07:55.21: [19824]: --> [2:OK] Jul 17 11:07:55.21: [19824]: <-- [9:AT+FBO=0\r] Jul 17 11:07:55.44: [19824]: --> [2:OK] Jul 17 11:07:55.44: [19824]: <-- [10:AT+FCT=30\r] Jul 17 11:07:55.68: [19824]: --> [2:OK] Jul 17 11:07:55.68: [19824]: <-- [15:AT+FNR=1,1,1,0\r] Jul 17 11:07:55.92: [19824]: --> [2:OK] Jul 17 11:07:55.92: [19824]: <-- [9:AT+FIE=0\r] Jul 17 11:07:56.15: [19824]: --> [2:OK] Jul 17 11:07:56.15: [19824]: <-- [9:AT+FBU=0\r] Jul 17 11:07:56.38: [19824]: --> [2:OK] Jul 17 11:07:56.38: [19824]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r] Jul 17 11:07:56.62: [19824]: --> [2:OK] Jul 17 11:07:56.62: [19824]: <-- [21:AT+FLI="The Boylans"\r] Jul 17 11:07:56.86: [19824]: --> [2:OK] Jul 17 11:07:56.86: [19824]: DIAL 4766153 Jul 17 11:07:56.86: [19824]: <-- [12:ATDT4766153\r] Jul 17 11:08:15.23: [19824]: --> [4:+FCO] Jul 17 11:08:18.47: [19824]: --> [27:+FCI:" 4154766153"] Jul 17 11:08:18.47: [19824]: REMOTE CSI "4154766153" Jul 17 11:08:18.47: [19824]: --> [20:+FIS:1,5,0,2,1,0,0,4] Jul 17 11:08:18.47: [19824]: --> [2:OK] Jul 17 11:08:18.47: [19824]: REMOTE best rate 14400 bit/s Jul 17 11:08:18.47: [19824]: REMOTE max page width 1728 pixels in 215 mm Jul 17 11:08:18.47: [19824]: REMOTE max unlimited page length Jul 17 11:08:18.47: [19824]: REMOTE best vres 7.7 line/mm Jul 17 11:08:18.47: [19824]: REMOTE best format 2-D MR Jul 17 11:08:18.47: [19824]: REMOTE best 20 ms, 10 ms/scanline Jul 17 11:08:18.47: [19824]: USE 14400 bit/s Jul 17 11:08:18.47: [19824]: USE 20 ms, 10 ms/scanline Jul 17 11:08:18.47: [19824]: SEND file "docq/doc61.cover;31" Jul 17 11:08:18.47: [19824]: USE page width 1728 pixels in 215 mm Jul 17 11:08:18.47: [19824]: USE unlimited page length Jul 17 11:08:18.47: [19824]: USE 7.7 line/mm Jul 17 11:08:18.47: [19824]: USE 1-D MR Jul 17 11:08:18.47: [19824]: <-- [23:AT+FIS=1,5,0,2,0,0,0,4\r] Jul 17 11:08:18.71: [19824]: --> [2:OK] Jul 17 11:08:18.71: [19824]: <-- [7:AT+FDT\r] Jul 17 11:08:18.98: [19824]: --> [20:+FCS:1,5,0,2,0,0,0,4] Jul 17 11:08:25.94: [19824]: --> [7:CONNECT] Jul 17 11:08:25.94: [19824]: SEND begin page Jul 17 11:08:25.94: [19824]: <-- data [1024] Jul 17 11:08:25.94: [19824]: <-- data [1026] Jul 17 11:08:25.94: [19824]: <-- data [1026] Jul 17 11:08:25.94: [19824]: <-- data [1046] Jul 17 11:08:25.94: [19824]: <-- data [1025] Jul 17 11:08:26.94: [19824]: <-- data [1025] Jul 17 11:08:26.94: [19824]: <-- data [1026] Jul 17 11:08:26.94: [19824]: <-- data [1025] Jul 17 11:08:28.04: [19824]: <-- data [1024] Jul 17 11:08:29.59: [19824]: <-- data [1029] Jul 17 11:08:29.59: [19824]: <-- data [1025] Jul 17 11:08:31.35: [19824]: <-- data [1025] Jul 17 11:08:32.86: [19824]: <-- data [1032] Jul 17 11:08:34.11: [19824]: <-- data [1018] Jul 17 11:08:34.11: [19824]: SENT 14328 bytes of data Jul 17 11:08:34.11: [19824]: SEND 1D RTC Jul 17 11:08:34.11: [19824]: <-- data [9] Jul 17 11:08:34.11: [19824]: SEND end page Jul 17 11:08:34.11: [19824]: SEND send MPS (more pages, same document) Jul 17 11:08:34.11: [19824]: <-- data [2] Jul 17 11:08:55.00: [19824]: --> [7:+FHS:52] Jul 17 11:08:55.00: [19824]: REMOTE HANGUP: No response to MPS repeated 3 times (code 52) Jul 17 11:08:55.00: [19824]: <-- [5:ATH0\r] Jul 17 11:08:55.11: [19824]: --> [2:OK] Jul 17 11:08:55.11: [19824]: MODEM set DTR OFF Jul 17 11:08:55.11: [19824]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5) Jul 17 11:08:55.11: [19824]: SESSION END ____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*
- Follow-Ups:
- Re: [hylafax-users] Fax stopped working
- From: Lee Howard
- Re: [hylafax-users] Fax stopped working
- References:
- [hylafax-users] Fax stopped working
- From: Ross Boylan
- [hylafax-users] Fax stopped working
- From: Ross Boylan
- [hylafax-users] Fax stopped working
- Prev by Date: Re: [hylafax-users] Fax receive EOP or MPN problem
- Next by Date: Re: [hylafax-users] Fax receive EOP or MPN problem
- Previous by thread: Re: [hylafax-users] Fax stopped working
- Next by thread: Re: [hylafax-users] Fax stopped working
- Index(es):
Project hosted by iFAX Solutions