HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] CAPI + HylaFax receiving problem



Hi there,
 
My configuartion is: SuSe8.0 + CAPI2 + CAPI4HYLAFAX + HYLAFAX4.1.6
 
Fax sending works fine, receiving also - I thought.
Till now I tried to receive faxes sent by fax machine SHARP/OKI which was in my office too using external number (with prefix) no internal. Today I have tried to receive fax from my uncle who stay far from my office and problem occured. According to log from c00000xxx file from /var/spool/fax/log connection was established but no data was received.Hylafax saved received file but file size was only 7B.
At first I thought maybe problem is on the other side - with my uncle fax so checked another fax standing in my house and problem was the same - only 7B in received file and message like attached below

Jul 03 14:12:00.36: [ 887]: SESSION BEGIN 00000119 +48.22.5294888

Jul 03 14:12:00.36: [ 887]: Incoming analog call on controller 2 from 00825650494 to 4888.

Jul 03 14:12:15.30: [ 887]: Connection established.

Jul 03 14:12:15.30: [ 887]: BaudRate = 9600

Jul 03 14:12:15.30: [ 887]: Flags = MR_compr, No_ECM

Jul 03 14:12:15.30: [ 887]: Write fax in path /var/spool/fax to file recvq/fax00042.tif.

Jul 03 14:12:23.02: [ 887]: Fax received and calling '/var/spool/fax/bin/faxrcvd "recvq/fax00042.tif" "faxCAPI21" "00000119" "Connection was established but no fax data was received." "" "" "4888"'.

Jul 03 14:12:23.24: [ 887]: Connection is droped with reason 0x3490 (Normal call clearing).

 

I wonder what does "No_ECM" flag mean because in all cases where problem with "no fax data received" accoured flags was "No_ECM"? During sending fax from my house to office, fax machine in my house displayed message "Connection error" but in hylafax log - "Connection was established but no fax data was received."

I also attached config.faxCAPI maybe there is something wrong with this file, but repeat once again: faxes from my office are received OK

Jul 04 11:52:16.85: [20566]: SESSION BEGIN 00000140 +48.22.5294888

Jul 04 11:52:16.85: [20566]: Incoming speech call on controller 2 to 4888.

Jul 04 11:52:25.96: [20566]: Connection established.

Jul 04 11:52:25.96: [20566]: BaudRate = 14400

Jul 04 11:52:25.96: [20566]: Flags = MMR_compr

Jul 04 11:52:25.96: [20566]: Write fax in path /var/spool/fax to file recvq/fax00048_2003-06-04_11:52:25.tif.

Jul 04 11:52:53.37: [20566]: Page 1 was received.

Jul 04 11:53:07.04: [20566]: Page 2 was received. - Last Page!

Jul 04 11:53:09.74: [20566]: Fax received and calling '/var/spool/fax/bin/faxrcvd "recvq/fax00048_2003-06-04_11:52:25.tif" "faxCAPI22" "00000140" "Text:" "ID:" "Reason:" "4888"'.

Jul 04 11:53:09.94: [20566]: Connection is droped with reason 0x3490 (Normal call clearing).

Jul 04 11:53:09.94: [20566]: SESSION END

As you can see, no "No_ECM" flag is present.

What can be wrong??

 

Thanks,Marcin

config.faxCAPI




Project hosted by iFAX Solutions