HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] What's required to make faxpolling work?



Thanks for the quick response.

However, this raises a few questions for me:

Is this so by standard or are there Class 2 modems supporting 
faxpolling?

Do all Class 1 modems support faxpolling?

As far as I know, adaptive answer support requires the modem to be run 
in Class 2 mode. Can I switch to Class 1 for polling jobs only, and 
how?

Thanks!

	Alex

Am Donnerstag, 3. Juli 2003 23:08 schrieb Lee Howard:
> On 2003.07.03 15:40 Peter Christoph Alexander Bär wrote:
> > I am running Hylafax 4.1.5 on SuSE Linux 8.2 with a very old Class
> > 1/2
> >
> > modem (haeussler h144e) configured as Class 2 with adaptive answer
> > support. I installed the software and ran faxsetup and faxaddmodem
> > following the guidelines in the SuSE 6.2 manual (yes, 6.2, not 8.2,
> > here) and the HowTo chapter on installation (section 2.3.2 for
> > SuSE). I
> > have absolutely no idea why poll jobs are apparently simply ignored
> > by
> >
> > the Hylafax server.
>
> Probably because your modem doesn't support polling in Class 2. 
> Please re-run faxaddmodem and use Class 1 (which does support
> polling).
>
> Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*




Project hosted by iFAX Solutions