HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] fine mode (default)



Hello,

I'm trying to change the resolution to "fine mode".
In the documentation, it is said that you can put 
'VRes: 196' in any of the files
'/usr/lib/fax/hfaxd.conf', '/usr/lib/fax/hyla.conf' 
'/usr/lib/fax/sendfax.conf' or in the home directory 
'~/.hylarc'.

I tried to put it in these files without success. I
always get a low resolution (3.85 line/mm):

(...)
Jul 02 15:51:04.18: [ 3228]: REMOTE best rate 14400
bit/s
Jul 02 15:51:04.18: [ 3228]: REMOTE max page width
1728 pixels in 215 mm
Jul 02 15:51:04.18: [ 3228]: REMOTE max unlimited page
length 
Jul 02 15:51:04.18: [ 3228]: REMOTE best vres 7.7
line/mm
Jul 02 15:51:04.18: [ 3228]: REMOTE best format 1-D MR
Jul 02 15:51:04.18: [ 3228]: REMOTE best 0 ms/scanline
Jul 02 15:51:04.18: [ 3228]: USE 14400 bit/s
Jul 02 15:51:04.18: [ 3228]: USE 0 ms/scanline
Jul 02 15:51:04.18: [ 3228]: SEND file
"docq/doc22.ps;00"
Jul 02 15:51:04.18: [ 3228]: USE page width 1728
pixels in 215 mm
Jul 02 15:51:04.18: [ 3228]: USE unlimited page length

Jul 02 15:51:04.18: [ 3228]: USE 3.85 line/mm
(...)

But if I use sendfax in the command line with the '-m'
option the resolution is ok (7.7).

I don't understand. Is there a special way to write
the VRes option? ('VRes: 196' or 'VRes: 196.0').

Pleaaase help!!!

Ben

___________________________________________________________
Do You Yahoo!? -- Une adresse @yahoo.fr gratuite et en français !
Yahoo! Mail : http://fr.mail.yahoo.com

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*




Project hosted by iFAX Solutions