HylaFAX The world's most advanced open source fax server |
I tried to add this line to samba configuration but I'm still having the same problem. Also when I try to run "testparam" I get warning that this line is unknown?!
Is there anything else I should check?
10x
>Have you tried adding 'user client driver = yes' to your Samba
>configuration? This is a botch to make Windows 2000 clients not try and
>take the printer drivers from the server (or something like that).
>HTH
>Noel
>-----Original Message-----
>From: Ian Firla [mailto:ian@deepsky.com]
>Sent: 14 March 2003 10:17
>To: Matt Darnell
>Cc: hylafax-users@hylafax.org
>Subject: Re: [hylafax-users] smbfax puzzle
>Thanks for the response. Indeed, it does work. What a rot though.
>Anyone know why this happens? It's a pretty ugly error to get and to
>explain to a non-technical user that they should ignore the error is a
>pretty ugly hack.
>I've now got two nearly identical systems set up. On one, I'm able to
>connect windows clients without an error... on the other... I get the
>error but, as you say, one can fax without a problem.
>Best,
>Ian
>On Thu, 13 Mar 2003, Matt Darnell wrote:
> We always get that error when we access the printer directly. It still
> works though.
>
> -Matt
>
>
>
> ----- Original Message -----
> From: "Ian Firla" <ian@deepsky.com>
> To: <hylafax-users@hylafax.org>
> Sent: Thursday, March 13, 2003 9:30 AM
> Subject: [hylafax-users] smbfax puzzle
>
>
> >
> > Dear All,
> >
> > I've run into a road block.
> >
> > Initially, I installed Hylafax and shared a printer via sambafax as is
> > described in the readme that comes with smbfax for windows users. It
> > worked perfectly.
> >
> > I've since reinstalled the machine and hylafax (using apt-get (I'm
> > tracking stable)) and am getting "Access denied, unable to connect" from
> > my windows clients.
> >
> > I've searched the archives and also googled for the error but this seems
> > pretty unique ... suggesting, perhaps that I've overlooked something
> > dreadfully obvious.
> >
> > I've played with the permissions in /var/spool/lpd and checked and
> > rechecked the conf files in /etc/hylafax and /etc/samba as well as the
> > perms on /usr/local/smbfax/smbfax as advised by the readme...
> >
> > I've also checked through everything listed in /usr/local/smbfax/
> >
> > Here's what dpkg shows I have installed:
> >
> > dpkg -l hylafax*
> > Desired=Unknown/Install/Remove/Purge/Hold
> > |
Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
> > |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err:
> > uppercase=bad)
> > ||/ Name Version Description
> >
>
+++-==============-==============-==========================================
> ==
> > ii hylafax-client 4.1.1-1.1 Flexible client/server fax software -
> > client
> > ii hylafax-doc 4.1.1-1.1 Flexible client/server fax software -
> > HTML D
> > ii hylafax-server 4.1.1-1.1 Flexible client/server fax software -
> > server
> >
> > dpkg -l samba*
> > Desired=Unknown/Install/Remove/Purge/Hold
> > |
Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
> > |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err:
> > uppercase=bad)
> > ||/ Name Version Description
> >
>
+++-==============-==============-==========================================
> ==
> > ii samba 2.2.3a-12 A LanManager like file and printer
> > server fo
> > un samba-client <none> (no description available)
> > ii samba-common 2.2.3a-12 Samba common files used by both the
> > server a
> > ii samba-doc 2.2.3a-12 Samba documentation.
> >
> > Any help or advice on what I've missed would be appreciated.
> >
> > Regards,
> >
> > Ian
> >
> > ------------
> > Dr Ian Firla
> > Robert Graves Trust | "A partial count of the software available
> > St John's College, Oxford | in just one noncommerical Linux system
> > OX1 3JP - +44-(0)7855-310565 | would have cost about $1.9 billion to
> develop
> > http://www.robertgraves.org | ... the way Microsoft does it" Bruce
Perens
> >
> >
> >
> > ____________________ HylaFAX(tm) Users Mailing List
> _______________________
> > To subscribe/unsubscribe, click
> http://lists.hylafax.org/cgi-bin/lsg2.cgi
> > On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org <
> /dev/null
> > *To learn about commercial HylaFAX(tm) support, mail
sales@hylafax.org.*
> >
>
>
------------
Dr Ian Firla
Robert Graves Trust | "A partial count of the software available
St John's College, Oxford | in just one noncommerical Linux system
OX1 3JP - +44-(0)7855-310565 | would have cost about $1.9 billion to
develop
http://www.robertgraves.org | ... the way Microsoft does it" Bruce
Perens