![]() |
hi all, after solving my problem with changing the outgoing number (thanx to Shafeer Hajamohideen), i am now stuck with the next problem. Sending a fax to the first number works fine (at the end i get an "Connection dropped with Reason 0x3400" - but it works) - below are the log entries. But we also have another fax - sending a fax to this number wont work. It starts sending - the other fax responds - starts to print out the fax, but after a while it stops (at the half of the page) to print it out and i get the error "Connection was dropped with Reason 0x3315". Could it be that ECM produces this error ? Can i turn ECM off ? How ? Any other ideas what could cause this error ? some infos about my hard/software - and logs software: -------------- hylafax 4.1.5 suse 7.2 AVM Fritz Card - kernel modules from the Fritz Card site capi4hylafax-01.02.02 fcpci-suse7.2-03.09.10 ------------- capiinfo: --------------- Controller 1: Manufacturer: AVM GmbH CAPI Version: 2.0 Manufacturer Version: 3.09-10 (48.154) Serial Number: 1000001 BChannels: 2 Global Options: 0x00000039 internal controller supported DTMF supported Supplementary Services supported channel allocation supported (leased lines) B1 protocols support: 0x4000011f 64 kbit/s with HDLC framing 64 kbit/s bit-transparent operation V.110 asynconous operation with start/stop byte framing V.110 synconous operation with HDLC framing T.30 modem for fax group 3 Modem asyncronous operation with start/stop byte framing B2 protocols support: 0x00000b1b ISO 7776 (X.75 SLP) Transparent LAPD with Q.921 for D channel X.25 (SAPI 16) T.30 fro fax group 3 ISO 7776 (X.75 SLP) with V.42bis compression V.120 asyncronous mode V.120 bit-transparent mode B3 protocols support: 0x800000bf Transparent T.90NL, T.70NL, T.90 ISO 8208 (X.25 DTE-DTE) X.25 DCE T.30 for fax group 3 reserved 0100 0200 39000000 1f010040 1b0b0000 bf000080 00000000 00000000 00000000 00000000 00000000 00000000 01000001 00020000 00000000 00000000 00000000 Supplementary services support: 0x000003ff Hold / Retrieve Terminal Portability ECT 3PTY Call Forwarding Call Deflection MCID CCBS ---------- log when it works: --------------- May 16 09:48:14.96: [14907]: CapiFaxSend - INFO: SESSION BEGIN 00000029 07066277451 May 16 09:48:14.96: [14907]: CapiFaxSend - INFO: FAX FAX: JOB 29 DEST 07066277422 COMMID 00000037 May 16 09:48:14.96: [14907]: CapiFaxSend - INFO: Try to connect to fax number 07066277422 in Hylafax mode on controller 1. May 16 09:48:14.96: [14907]: CapiFaxSend - INFO: Dial and starting transfer of TIFF-File docq/doc29.cover;01 with fine resolution. May 16 09:48:29.40: [14914]: CapiFaxSend - INFO: Connection established. May 16 09:48:29.40: [14914]: CapiFaxSend - INFO: StationID = 0732 662774 22 May 16 09:48:29.40: [14914]: CapiFaxSend - INFO: BaudRate = 9600 May 16 09:48:29.40: [14914]: CapiFaxSend - INFO: Flags = HighRes, MR_compr, MMR_compr May 16 09:48:37.90: [14914]: CapiFaxSend - INFO: Page 1 was sended. May 16 09:48:37.90: [14914]: CapiFaxSend - INFO: Start transfer of TIFF-File docq/doc48.ps;01 with fine resolution. May 16 09:49:25.23: [14914]: CapiFaxSend - INFO: Page 2 was sended. May 16 09:50:03.00: [14914]: CapiFaxSend - INFO: Page 3 was sended. - Last Page! May 16 09:25:48.58: [14775]: CapiFaxSend - INFO: Fax file completely transfered to CAPI. May 16 09:26:05.32: [14775]: CapiFaxSend - INFO: Connection dropped with Reason 0x3400 (No additional information). ------------ log when it fails ------------ May 16 09:16:06.98: [14722]: CapiFaxSend - INFO: SESSION BEGIN 00000027 07066277451 May 16 09:16:06.98: [14722]: CapiFaxSend - INFO: FAX FAX: JOB 27 DEST 07066277444 COMMID 00000035 May 16 09:16:06.98: [14722]: CapiFaxSend - INFO: Try to connect to fax number 07066277444 in Hylafax mode on controller 1. May 16 09:16:06.98: [14722]: CapiFaxSend - INFO: Dial and starting transfer of TIFF-File docq/doc27.cover;01 with fine resolution. May 16 09:16:22.57: [14729]: CapiFaxSend - INFO: Connection established. May 16 09:16:22.57: [14729]: CapiFaxSend - INFO: StationID = 073266277444 May 16 09:16:22.57: [14729]: CapiFaxSend - INFO: BaudRate = 14400 May 16 09:16:22.57: [14729]: CapiFaxSend - INFO: Flags = HighRes, MR_compr, MMR_compr May 16 09:16:31.08: [14729]: CapiFaxSend - INFO: Page 1 was sended. May 16 09:16:31.08: [14729]: CapiFaxSend - INFO: Start transfer of TIFF-File docq/doc44.ps;01 with fine resolution. May 16 09:17:03.74: [14729]: CapiFaxSend - INFO: Page 2 was sended. May 16 09:17:29.46: [14729]: CapiFaxSend - INFO: Page 3 was sended. - Last Page! May 16 09:17:29.46: [14729]: CapiFaxSend - INFO: Fax file completely transfered to CAPI. May 16 09:17:29.46: [14729]: CapiFaxSend - INFO: Fax file completely transfered to CAPI. May 16 09:17:29.46: [14729]: CapiFaxSend - INFO: Fax file completely transfered to CAPI. May 16 09:17:29.46: [14729]: CapiFaxSend - INFO: Fax file completely transfered to CAPI. May 16 09:17:29.46: [14729]: CapiFaxSend - INFO: Fax file completely transfered to CAPI. May 16 09:17:29.46: [14729]: CapiFaxSend - INFO: Fax file completely transfered to CAPI. May 16 09:17:29.46: [14729]: CapiFaxSend - INFO: Fax file completely transfered to CAPI. May 16 09:17:29.46: [14729]: CapiFaxSend - INFO: Fax file completely transfered to CAPI. May 16 09:17:29.46: [14729]: CapiFaxSend - INFO: Fax file completely transfered to CAPI. May 16 09:17:29.46: [14729]: CapiFaxSend - INFO: Fax file completely transfered to CAPI. May 16 09:17:29.46: [14729]: CapiFaxSend - INFO: Fax file completely transfered to CAPI. May 16 09:17:29.46: [14729]: CapiFaxSend - INFO: Fax file completely transfered to CAPI. May 16 09:17:29.46: [14729]: CapiFaxSend - INFO: Fax file completely transfered to CAPI. May 16 09:17:29.46: [14729]: CapiFaxSend - INFO: Fax file completely transfered to CAPI. May 16 09:17:29.46: [14729]: CapiFaxSend - INFO: Fax file completely transfered to CAPI. May 16 09:17:29.46: [14729]: CapiFaxSend - INFO: Fax file completely transfered to CAPI. May 16 09:17:29.46: [14729]: CapiFaxSend - ERROR: Only 1 from 3 pages are transfered! May 16 09:17:29.46: [14729]: CapiFaxSend - INFO: Connection was dropped with Reason 0x3315 (Disconnected during transfer (remote procedure error, e.g. unsuccessful repetition of T.30 commands)) before Fax was completely transfered. May 16 09:17:29.67: [14729]: CapiFaxSend - INFO: Connection dropped with Reason 0x3400 (No additional information). ------------ ____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*