[hylafax-users] [Job time limit exceeded]

[Leen de Braal <ldb@braha.nl>]

Hi all,

I am new to this list and I start with an apology, if this post might be 
too long, but I am having some troubles with faxing out of an 
Access-application.
Setup is as follows:
SuSE 7.3
hylafax 4.1.34
WinXP clients, WHFC as faxclient, Apple Laserwriter16/600 as driver
ghostscript 6.51-41

If I fax a "normal" Word doc (even +10 pages) no problems arise, but as 
soon as a 2 page document out of Access (a report) is printed, I am having 
next message:
<<QUOTE>>

Your facsimile job to xxxx xxxxxxxx was not sent because document
conversion
to facsimile failed.  The output from the converter program was:

%%[ ProductName: GNU Ghostscript ]%%

[Job time limit exceeded]


Check any PostScript documents for non-standard fonts and invalid
constructs.

     ---- Unsent job status ----

    Destination: xxxx xxxxxxxx
          JobID: 1742
        GroupID: 1742
         Sender: MyCompany
       Mailaddr: mymail@mycompany.nl
Submitted From: 192.168.0.47
     Page Width: 194 (mm)
    Page Length: 281 (mm)
     Resolution: 196 (lpi)
         Status: %%[ ProductName: GNU Ghostscript ]%%

[Job time limit exceeded]

        Dialogs: 0 (exchanges with remote device)
          Dials: 0 (consecutive failed calls to destination)
          Calls: 0 (total phone calls placed)
          Pages: 0 (pages transmitted)
       TotPages: 0 (total pages to transmit)
       Attempts: 0 (attempts to send current page)
         Dirnum: 0 (directory of next page to send)

     ---- Documents submitted for transmission ----

The following documents were submitted for transmission and are
available on the server for reuse until they are automatically
purged when this job is removed.  Documents may also be manually
removed using the faxrm command; consult faxrm(1) for information.

Filename                 Size Type
docq/doc1722.ps.1742   667753 PostScript

<<UNQUOTE>>

I already have enlarged the postscript timeout setting in hylafax-config 
from 300 to 1200 seconds (in steps) but to no avail.
Also the gs-process running on the machine is still there, taking up 100% 
of CPU-time, and so slowing down the other services on the machine (mainly 
samba and printing).

My question:
How can I find out if this is not something in the document itself, like 
hylafax suggests? What are invalid constructs, what do i have to look for 
in the .ps document? How can i start the conversion that ghostscript does, 
manually and follow the error messages (if there are any)? Or is there some 
log of gs? I could not find it.

TIA

Leen.


L. de Braal
BraHa Systems
Terneuzen - NL
T +31 115 649333
F +31 115 649444




____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*