[hylafax-users] Waiting for modem to come ready, again

[Julian Scheid <julian.scheid@ogilvy-interactive.de>]

I've got the "Waiting for modem to come ready" problem, but
the FAQ entry and the mailing list messages brought up by
Google unfortunately didn't help.

I should note that it already worked, so the modem config
basically seems to be OK.

I'm running 4.1.5 on Linux with an "Elsa MicroLink 56k Fun II"
(Class 1 capable, ought to support 1.0 according to the manual
but trying to switch to 1.0 mode results in ERROR - so I use
it in Class 1 mode.)

In this context I have the following questions:

- faxmodem is supposed to set the status, but it doesn't,
and also doesn't give an error message.
How can I trace what faxmodem is doing? I cannot find any
log information anywhere, neither in syslog nor in
etc/xferlog nor in logs/*.

- The same is true for faxstate - it doesn't modify the
status, doesn't give an error either, and I can't find any
log information as well.

Also, rebooting the system, resetting the modem physically,
doing ATZ etc. all don't help changing the status - but the
strange thing is, it already worked! I was already able to
send fax messages. Any idea how I can reset everything to
"initial" state? Any hints how I could go about tracking this
problem down?

Thanks a lot,

Julian


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*