[hylafax-users] repost: incoming calls - ignore voice calls

["Dmitri Colebatch" <dim@colebatch.com>]

Apologies for the repost without any additional info, but can someone tell
me:

1. is hylafax capable of "silent pickup" (not sure if this is the correct
name for this functionality) so that it only answers fax calls, leaving me
free to answer voice calls on my normal phone?

2. is anyone on the list using this functionality?

cheers
dim

> more info:
>
> the modem is reported (in the logs) as MODEM SERIES 5  V.34 28800 MODEM
> DFS256K(K)-Z7 28800/
>
> so I found this http://www.hylafax.org/archive/1997-04/msg00117.php  and
> tried to use it as a class 2 modem (using faxaddmodem), with the
> ModemSetupAACmd: AT+FAA=1 as per
> http://www.hylafax.org/setup-advanced.php#AdaptiveAnswer
>
> I'm going to leave this for a while now... if there's any more information
> that I should provide in order to help people trying to respond, let me
> know.
>
> thanks in advance,
> dim
>
> > -----Original Message-----
> > From: hylafax-users-bounce@hylafax.org
> > [mailto:hylafax-users-bounce@hylafax.org]On Behalf Of Dmitri Colebatch
> > Sent: Sunday, 20 April 2003 2:01 PM
> > To: hylafax-users@hylafax.org
> > Subject: [hylafax-users] incoming calls - ignore voice calls
> >
> >
> > Hey all,
> >
> > Ok, I hope this isn't too much of a newbie question - I've just
> installed
> > hylafax on a mandrake8 box, and have been wading my way through
> > the docs and
> > archive to try and see if I can do what I want to do.
> >
> > What I want to do is have hylafax only pickup incoming calls that are
> > actually faxes - leaving me free to answer other calls using my normal
> > phone.
> >
> > Distinctive ring isn't an option as I already have that on this
> line used
> > for a business line.
> >
> > I found this email
> (http://www.hylafax.org/archive/2001-07/msg00020.php)
> > which seemed to point me in the right direction.
> >
> > Here's what I see as the relevant part of my config:
> >
> > <snip>
> > ModemType:              Class1          # use class 1 interface
> > ModemRate:              19200           # locked for fax
> sending&receiving
> > ModemFlowControl:       rtscts          # default
> > #
> > ModemNoFlowCmd:         AT\Q0           # disable flow control cmd
> > ModemSoftFlowCmd:       AT\Q1           # software flow control cmd
> > ModemHardFlowCmd:       AT\Q3           # hardware flow control cmd
> > ModemSetupDTRCmd:       AT&D3           # DTR off causes modem to reset
> > ModemSetupDCDCmd:       AT&C1           # DCD follows carrier
> > #
> > ModemDialCmd:           ATDT%s          # T for tone dialing
> >
> > AdaptiveAnswer:         yes             # enable adaptive answer
> > AnswerRotary:           "fax"           # answer for fax
> > ModemAnswerCmd:         AT+FCLASS=1;A   # default is to answer as fax
> > Class1RecvIdentTimer:   10000           # timeout fax answer in 10 secs
> > </snip>
> >
> > I have tried AnswerRotary as "voice fax data" and "fax data" as
> well, but
> > with no success.
> >
> > When a call comes in, I get this in my logs:
> >
> > Apr 20 13:46:19 firewall FaxGetty[3708]: ANSWER: FAX CONNECTION  DEVICE
> > '/dev/ttyS1'
> > Apr 20 13:46:46 firewall FaxGetty[3708]: ANSWER: DATA CONNECTION
> > Apr 20 13:46:46 firewall FaxGetty[3708]: GETTY: START
> > "/sbin/getty -h ttyS1
> > dx_19200", pid 4284
> > Apr 20 13:46:46 firewall getty[4284]: Segmentation fault
> > Apr 20 13:46:46 firewall FaxGetty[3708]: GETTY: exit status 0400
> > Apr 20 13:46:54 firewall FaxGetty[3708]: MODEM SERIES 5  V.34
> 28800 MODEM
> > DFS256K(K)-Z7 28800/
> >
> > which to me suggests that its still trying to answer the call as a data
> > call.
> >
> > Can anyone tell me where to look next for how to configure
> hylafax to only
> > pickup fax calls?
> >
> > cheers
> > dim
> >
> >
> > ____________________ HylaFAX(tm) Users Mailing List
> > _______________________
> >   To subscribe/unsubscribe, click
> > http://lists.hylafax.org/cgi-bin/lsg2.cgi
> >  On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org <
> /dev/null
> >   *To learn about commercial HylaFAX(tm) support, mail
> > sales@hylafax.org.*
>
>
> ____________________ HylaFAX(tm) Users Mailing List
> _______________________
>   To subscribe/unsubscribe, click
> http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org <
/dev/null
>   *To learn about commercial HylaFAX(tm) support, mail
> sales@hylafax.org.*


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*