[hylafax-users] Broadcast faxing problems with WHFC

["Ian Dobson" <ian@fastnet.bc.ca>]

Ok I changed the subject line :)

If I sendfax -n 5551212 file.ps  I get the killtime as I defined it in
hlya.conf

if I send with WHFC 1.0.9 I get a killtime of 1-47 hours (set with the
slider), unless I set it at 48 hours and the server naks the request with a
killtime expired
Or if I set it at server then the killtime is set to 3 hours.. is it whfc or
hylafax?
How do I find out where to set this?

Or in a pinch  how can I scan all the faxes in the sendq and add 3 days to
the killtime setting?
Thanks :)




----- Original Message -----
From: "Holger Raschke" <holger.raschke@presse-data.de>
Cc: "Hylafax-Users" <hylafax-users@hylafax.org>
Sent: Friday, April 04, 2003 3:41 AM
Subject: Re: [hylafax-users] Broadcast faxing problems


>
>
> Truong wrote:
> > Hi Ian,
> >
> > I got the same error message since 2 days after making a test with the
> > option " -T 3 " for sendfax. Until now I can't send any fax out.
>
> man sendfax.
> KillTime parameter is -k.
>
> You can define this system wide in sendfax.conf.
>
> --
> Holger
>
> >
> > % *** Ian Dobson <ian@fastnet.bc.ca> wrote: ***
> > % Hi, we send out a fax to all of our customers once a month and this
happens
> > % after 3 hours all the faxes fail with the following message
> > %
> > % I've played with the Killtime setting but that doesn't seem to do
anything
> > % at all so I'm probably doing it wrong.  Please help, this is driving
me up
> > % the wall :(
> > %
> > %
> > % Your facsimile job to 6045551212 could not be completed before the
appointed
> > % deadline.
> > %
> > %     ---- Unsent job status ----
> > %
> > %    Destination: 6045551212
> > %          JobID: 7543
> > %        GroupID: 7543
> > %         Sender: Administrator
> > %       Mailaddr: faxsrvr
> > %         CommID: 00002816
> > % Submitted From: 192.168.1.151
> > %     Page Width: 200 (mm)
> > %    Page Length: 264 (mm)
> > %     Resolution: 98 (lpi)
> > %         Status: Busy signal detected
> > %        Dialogs: 0 (exchanges with remote device)
> > %          Dials: 1 (consecutive failed calls to destination)
> > %          Calls: 1 (total phone calls placed)
> > %          Pages: 0 (pages transmitted)
> > %       TotPages: 1 (total pages to transmit)
> > %       Attempts: 0 (attempts to send current page)
> > %         Dirnum: 0 (directory of next page to send)
> > %
> > %     ---- Documents submitted for transmission ----
> > %
> > % The following documents were submitted for transmission and are
> > % available on the server for reuse until they are automatically
> > % purged when this job is removed.  Documents may also be manually
> > % removed using the faxrm command; consult faxrm(1) for information.
> > %
> > % Filename                 Size Type
> > % docq/doc33.ps          234874 PostScript
> > %
> > %
> > % ____________________ HylaFAX(tm) Users Mailing List
_______________________
> > %   To subscribe/unsubscribe, click
http://lists.hylafax.org/cgi-bin/lsg2.cgi
> > %  On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org <
/dev/null
> > %   *To learn about commercial HylaFAX(tm) support, mail
sales@hylafax.org.*
> > % *** END of Message From Ian Dobson ***
> >
>
>
> ____________________ HylaFAX(tm) Users Mailing List
_______________________
>   To subscribe/unsubscribe, click
http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org <
/dev/null
>   *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*
>
>


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*