[hylafax-users] ÿso-8859-1?Q?No_response_to_MPS_+_REMOTE_NSF_"1_î¸Ä_...?Date: Fri, 21 Mar 2003 14:55:48 +0100

[hylafax-users-bounce@hylafax.org]

Hi,

I have problems sending MPS faxes from Europe to US. Within Europe it always works, but from Europe to US it always seems to fail.
We are running Hylafax 4.0, would it be a good idea to upgrade?

See log and the strange respone for NSF:

mar 04 09:36:26.55: [14828]: SESSION BEGIN 00000437 0016177379255
mar 04 09:36:26.55: [14828]: SEND FAX: JOB 86 DEST 000016177379255 COMMID 0000
0437
mar 04 09:36:26.55: [14828]: DELAY 2600 ms
mar 04 09:36:29.15: [14828]: <-- [17:ATE0V1Q0X4S0=0H0\r]
mar 04 09:36:29.29: [14828]: --> [2:OK]
mar 04 09:36:29.29: [14828]: <-- [32:ATS8=2S7=60&H1&I0&R2S13=1&D2&C1\r]
mar 04 09:36:29.43: [14828]: --> [2:OK]
mar 04 09:36:29.43: [14828]: <-- [14:AT+FCLASS=2.0\r]
mar 04 09:36:29.57: [14828]: --> [2:OK]
mar 04 09:36:29.57: [14828]: <-- [9:AT+FLO=2\r]
mar 04 09:36:29.71: [14828]: --> [2:OK]
mar 04 09:36:29.71: [14828]: <-- [9:AT+FPP=0\r]
mar 04 09:36:29.85: [14828]: --> [2:OK]
mar 04 09:36:29.85: [14828]: <-- [9:AT+FBO=0\r]
mar 04 09:36:29.99: [14828]: --> [2:OK]
mar 04 09:36:29.99: [14828]: <-- [10:AT+FCT=30\r]
mar 04 09:36:30.13: [14828]: --> [2:OK]
mar 04 09:36:30.13: [14828]: <-- [15:AT+FNR=1,1,1,1\r]
mar 04 09:36:30.27: [14828]: --> [2:OK]
mar 04 09:36:30.27: [14828]: <-- [9:AT+FIE=0\r]
mar 04 09:36:30.41: [14828]: --> [2:OK]
mar 04 09:36:30.41: [14828]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
mar 04 09:36:30.55: [14828]: --> [2:OK]
mar 04 09:36:30.55: [14828]: <-- [5:ATM0\r]
mar 04 09:36:30.68: [14828]: --> [2:OK]
mar 04 09:36:30.69: [14828]: <-- [14:AT+FCLASS=2.0\r]
mar 04 09:36:30.92: [14828]: --> [2:OK]
mar 04 09:36:30.92: [14828]: <-- [9:AT+FLO=2\r]
mar 04 09:36:31.16: [14828]: --> [2:OK]
mar 04 09:36:31.16: [14828]: <-- [9:AT+FPP=0\r]
mar 04 09:36:31.40: [14828]: --> [2:OK]
mar 04 09:36:31.40: [14828]: <-- [9:AT+FBO=0\r]
mar 04 09:36:31.64: [14828]: --> [2:OK]
mar 04 09:36:31.64: [14828]: <-- [10:AT+FCT=30\r]
mar 04 09:36:31.88: [14828]: --> [2:OK]
mar 04 09:36:31.88: [14828]: <-- [15:AT+FNR=1,1,1,1\r]
mar 04 09:36:32.12: [14828]: --> [2:OK]
mar 04 09:36:32.12: [14828]: <-- [9:AT+FIE=0\r]
mar 04 09:36:32.36: [14828]: --> [2:OK]
mar 04 09:36:32.36: [14828]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
mar 04 09:36:32.60: [14828]: --> [2:OK]
mar 04 09:36:32.60: [14828]: <-- [24:AT+FLI="XXX"\r]
mar 04 09:36:32.84: [14828]: --> [2:OK]
mar 04 09:36:32.84: [14828]: DIAL 000016177379255
mar 04 09:36:32.85: [14828]: <-- [20:ATDT000016177379255\r]
mar 04 09:36:49.45: [14828]: --> [4:+FCO]
mar 04 09:36:52.74: [14828]: --> [30:+FNF:1 î¸Ä 
                                                ÝÝÝÝÝÝÝÝí!°´]
mar 04 09:36:52.74: [14828]: REMOTE NSF "1 î¸Ä 
                                               ÝÝÝÝÝÝÝÝí!°´"
mar 04 09:36:52.74: [14828]: --> [27:+FCI:"         16177379255"]
mar 04 09:36:52.74: [14828]: REMOTE CSI "16177379255"
mar 04 09:36:52.74: [14828]: --> [20:+FIS:1,5,0,2,1,0,0,4]
mar 04 09:36:52.74: [14828]: --> [2:OK]
mar 04 09:36:52.74: [14828]: REMOTE best rate 14400 bit/s
mar 04 09:36:52.75: [14828]: REMOTE max page width 1728 pixels in 215 mm
mar 04 09:36:52.75: [14828]: REMOTE max unlimited page length 
mar 04 09:36:52.75: [14828]: REMOTE best vres 7.7 line/mm
mar 04 09:36:52.75: [14828]: REMOTE best format 2-D MR
mar 04 09:36:52.75: [14828]: REMOTE best 20 ms, 10 ms/scanline
mar 04 09:36:52.75: [14828]: USE 14400 bit/s
mar 04 09:36:52.75: [14828]: USE 20 ms, 10 ms/scanline
mar 04 09:36:52.75: [14828]: SEND file "docq/doc86.cover;01"
mar 04 09:36:52.75: [14828]: USE page width 1728 pixels in 215 mm
mar 04 09:36:52.75: [14828]: USE unlimited page length 
mar 04 09:36:52.75: [14828]: USE 7.7 line/mm
mar 04 09:36:52.75: [14828]: USE 1-D MR
mar 04 09:36:52.75: [14828]: <-- [23:AT+FIS=1,5,0,2,0,0,0,4\r]
mar 04 09:36:52.98: [14828]: --> [2:OK]
mar 04 09:36:52.98: [14828]: <-- [7:AT+FDT\r]
mar 04 09:36:53.25: [14828]: --> [20:+FCS:1,5,0,2,0,0,0,4]
mar 04 09:37:00.00: [14828]: --> [7:CONNECT]
mar 04 09:37:00.00: [14828]: SEND begin page
mar 04 09:37:00.01: [14828]: <-- data [1027]
mar 04 09:37:00.01: [14828]: <-- data [1025]
mar 04 09:37:00.01: [14828]: <-- data [1044]
mar 04 09:37:00.01: [14828]: <-- data [1031]
mar 04 09:37:00.01: [14828]: <-- data [1026]
mar 04 09:37:00.54: [14828]: <-- data [1046]
mar 04 09:37:00.54: [14828]: <-- data [1026]
mar 04 09:37:01.08: [14828]: <-- data [1029]
mar 04 09:37:01.08: [14828]: <-- data [1032]
mar 04 09:37:03.26: [14828]: <-- data [1025]
mar 04 09:37:03.26: [14828]: <-- data [1028]
mar 04 09:37:06.61: [14828]: <-- data [1032]
mar 04 09:37:06.61: [14828]: <-- data [1029]
mar 04 09:37:09.55: [14828]: <-- data [1028]
mar 04 09:37:09.55: [14828]: <-- data [1026]
mar 04 09:37:11.21: [14828]: <-- data [1029]
mar 04 09:37:11.21: [14828]: <-- data [1026]
mar 04 09:37:12.87: [14828]: <-- data [355]
mar 04 09:37:12.87: [14828]: SENT 17762 bytes of data
mar 04 09:37:12.87: [14828]: SEND 1D RTC
mar 04 09:37:12.87: [14828]: <-- data [9]
mar 04 09:37:15.08: [14828]: SEND end page
mar 04 09:37:15.08: [14828]: SEND send MPS (more pages, same document)
mar 04 09:37:15.08: [14828]: <-- data [2]
mar 04 09:37:32.38: [14828]: --> [7:+FHS:52]
mar 04 09:37:32.38: [14828]: REMOTE HANGUP: No response to MPS repeated 3 time
s (code 52)
mar 04 09:37:32.38: [14828]: <-- [5:ATH0\r]
mar 04 09:37:32.51: [14828]: --> [2:OK]
mar 04 09:37:32.52: [14828]: SESSION END


________________________________________________________
Anders Nystrom    +33 4 9238 4179 (direct)
Knowledge Center  +33 683 693 693 (mobile)
Trema Laboratoires SARL 
1300 route des Cretes
Parc de Sophia-Antipolis
F-06560 Valbonne
France

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*