Re: [hylafax-users] Perle PCI-RAS 4; Unable to send faxes; no response to EOP repeated 3 times

["Martijn" <tgm@fluim.net>]

Hi Kurt,

I played a lot with the parameter. First I set it up according to the
capabilities of the official document
(http://www.perle.com/support/documentation_pdfs/PCI_RAS_command_referen
ce.pdf). This one states the faxmodem only supports 1-D Modified
Huffman.

That didn't help, so I changed the parameters to the lowest possible;
didn't help either. Than I tried some more parameters, but it makes no
difference. So I think the capabilities reported by the faxmodem are
correct: (0,1),(0-5),(0-2),(0-2),0,0,0,(0-7)

If the damn card didn't work with Windows I would've already thrown it
away, but both Class 1 and 2 are working just fine in Windows so there
must be something wrong with HylaFax (or the combination of HylaFax and
the Perle card, or maybe Linux).

Martijn

> -----Original Message-----
> From: Kurt Weiss [mailto:input.maillists@kwnet.at] 
> Sent: Tuesday, March 18, 2003 8:36 AM
> To: Martijn
> Cc: hylafax-users@hylafax.org
> Subject: Re: [hylafax-users] Perle PCI-RAS 4; Unable to send 
> faxes; no response to EOP repeated 3 times
> 
> 
> hi martijn
> 
> Martijn schrieb:
> > Hi,
> > 
> > I've tried the Class2DCCQueryCmd parameter, but it doesn't 
> help. It look
> > likes the auto configuration of the capabilities works fine.
> 
> as in my case was...
> u cannot take the same settings for this command, u have to play with 
> the parameters, as descripted in the docs.
> *this parameters depends on the docs.*
> 
> > 
> > Receiving faxes with the Perle card works OK. (so I think the
> > communication between computer and modem is indeed ok), but 
> sending the
> > same document back to the same (analog) fax machine fails.
> 
> i know, i've had the same situation.
> 
http://www.hylafax.org/setup-advanced.php#Class2Liars


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*