Re: [hylafax-users] installing hylafax on SuSE

[Jone Haran <j.haran@hizkia.fr>]

Hi,
You do not need to configure your modem with yast. You just have to 
verify that your modem is detected and recognized. When you run 
faxsetup, you are also going to run faxaddmodem wich configures the 
modem for hylafax.
Best regards
Jone

Egemen Öztan wrote:

>Hi,
>
>can anyone tell me, how to install and run hylafax? I mean really! Shall I
>configure the modem before I try to install hylafax? If so, how can I configure
>the modem without providing provider information - yast asks by the modem
>configuration provider information - (I do not use the modem to connect to the
>internet, it will only do faxing). I have read a number of documentation on
>hylafax site and elsewhere on internet, however I can not proceed further. 
>
>The documentation on the hylafax site
>(http://www.hylafax.org/howto/install.php#ss2.3.2) gives a good introduction
>until section 2.3.2.4. Then in section 2.3.2.5 there are some useful hints
>"before" running faxsetup and ends without saying what to do next (running
>faxsetup). It says in section 2.3.2.3 that faxgetty should be commented out.
>Without saying later when faxsetup should run it says in section 2.3.2.5/C that
>"Make sure that Faxgetty is running at bootup"!
>
>This is how I proceeded:
>
>- I uninstalled mgetty (s. section 2.3.2.2)
>- SuSE Email Server 3.1 does not have a package hylafax on the distribution CD
>- I downloaded hylafax and installed with yast
>- I do not have an entry START_HYLAFAX in my rc.config, which I guess might be
>a first sign that something is going wrong
>- I ran faxsetup with following warnings: /sbin/mgetty does not exist... (which
>is OK because it is uninstalled)(...), /sbin/vgetty does not exist...(...),
>/sbin/egetty does not exist...(...), You do not appear to be using faxgetty to
>notify... (I have already commented out this entry from inittab because of the
>instructions on 2.3.2.3)
>
>Now, I think that I could need some help in order to make hylafax running on my
>system.
>
>1) I have a SuSE Email Server 3.1 based on SuSE Linux 7.1
>2) I downloaded the latest binary package (hylafax-4.1-16suse.i386.rpm) from
>ftp://ftp.hylafax.org/binary/linux/suse
>3) I have a cybermod 28.8 v.34 fax modem connected to the serial port of the
>computer
>
>Any hint will be appreciated.
>
>Thanks
>Egemen
>  
>



____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*