HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] Perle PCI-RAS 4; Unable to send faxes; no response to EOP repeated 3 times



Hi,

I have the following setup:

Intel Pentium II, 256mb, 40gb hd
2 onboard com ports with external tornado modems
1 NetMos PCI card with 2 com ports with eTech modems
1 Perle PCI-RAS 4 (4 comports + onboard modems)
In total: 8 faxmodems.

I'm running HylaFax 4.1.5 on Linux slackware 8.1. The 'normal' com ports
are on /dev/tts/0 to /dev/tts/3 and the Perle faxmodems are on
/dev/tts/4 to /dev/tts/7. Minicom works fine with any of these ports.

Hylafax in combination with the four external modems are working ok.

Unfortunately, a fax sent with the Perle card will fail (See log file)
The (normal) fax machine on the other end will print the fax, but it
looks like garbage.

I don't get the following lines:
Mar 11 15:24:33.13: [  749]: REMOTE best format 2-D MR
Mar 11 15:24:33.14: [  749]: USE 1-D MR
It doesn't matter if I specify -1 of -2 as sendfax parameters. It will
listen to the -m parameter though (not supplied here).

I've tried both Class 2 and 1. I've tried other destinations, all will
report communication problems and print garbage.
I've also tried several config files (config/class2,
config/rockwell-k56, etc). But all will show the same problem.

When I tried the Perle card in a Windows XP machine with some random
shareware fax program (PrimaFax Pro iirc) everything works flawlessly
(both with class 2 and 1). So the Perle card is definately capable of
sending faxes using class 2. Unfortunately the fax program is unable to
create logfiles, so I can't see the AT codes sent to the Perle card.

I've updated the firmware of the modems on the Perle card to the latest
version (V3.400-V90_2M_DLS, 56K V.90 Version 3.4)


Somebody any ideas?

Greets,

Martijn




Mar 11 15:24:06.78: [  749]: SESSION BEGIN 00020945 xxxxxxxxxxxx
Mar 11 15:24:06.78: [  749]: HylaFAX (tm) Version 4.1.5
Mar 11 15:24:06.78: [  749]: SEND FAX: JOB 11612 DEST xxxxxxxxxx COMMID
00020945 DEVICE '/dev/tts/4'
Mar 11 15:24:06.78: [  749]: DELAY 75 ms
Mar 11 15:24:06.86: [  749]: DELAY 2600 ms
Mar 11 15:24:09.46: [  749]: DELAY 10 ms
Mar 11 15:24:09.47: [  749]: <-- [4:ATZ\r]
Mar 11 15:24:09.60: [  749]: --> [2:OK]
Mar 11 15:24:09.60: [  749]: DELAY 2000 ms
Mar 11 15:24:11.60: [  749]: <-- [5:ATE0\r]
Mar 11 15:24:11.61: [  749]: --> [4:ATE0]
Mar 11 15:24:11.61: [  749]: --> [2:OK]
Mar 11 15:24:11.61: [  749]: <-- [5:ATV1\r]
Mar 11 15:24:11.62: [  749]: --> [2:OK]
Mar 11 15:24:11.62: [  749]: <-- [5:ATQ0\r]
Mar 11 15:24:11.63: [  749]: --> [2:OK]
Mar 11 15:24:11.63: [  749]: <-- [7:ATS0=0\r]
Mar 11 15:24:11.65: [  749]: --> [2:OK]
Mar 11 15:24:11.65: [  749]: <-- [7:ATS8=2\r]
Mar 11 15:24:11.67: [  749]: --> [2:OK]
Mar 11 15:24:11.67: [  749]: <-- [8:ATS7=60\r]
Mar 11 15:24:11.69: [  749]: --> [2:OK] 
Mar 11 15:24:11.69: [  749]: <-- [6:AT&K4\r]
Mar 11 15:24:11.70: [  749]: --> [2:OK]
Mar 11 15:24:11.70: [  749]: <-- [6:AT&D3\r]
Mar 11 15:24:11.71: [  749]: --> [2:OK]
Mar 11 15:24:11.71: [  749]: <-- [6:AT&C1\r]
Mar 11 15:24:11.72: [  749]: --> [2:OK]
Mar 11 15:24:11.72: [  749]: <-- [12:AT+FCLASS=2\r]
Mar 11 15:24:11.74: [  749]: --> [2:OK]
Mar 11 15:24:11.74: [  749]: <-- [10:AT+FTBC=0\r]
Mar 11 15:24:11.76: [  749]: --> [2:OK]
Mar 11 15:24:11.76: [  749]: <-- [10:AT+FBOR=0\r]
Mar 11 15:24:11.78: [  749]: --> [2:OK]
Mar 11 15:24:11.78: [  749]: <-- [13:AT+FPHCTO=30\r]
Mar 11 15:24:11.80: [  749]: --> [2:OK]
Mar 11 15:24:11.80: [  749]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r]
Mar 11 15:24:11.83: [  749]: --> [2:OK]
Mar 11 15:24:11.83: [  749]: <-- [5:ATM0\r]
Mar 11 15:24:11.84: [  749]: --> [2:OK]
Mar 11 15:24:11.84: [  749]: <-- [12:AT+FCLASS=2\r]
Mar 11 15:24:11.96: [  749]: --> [2:OK]
Mar 11 15:24:11.96: [  749]: <-- [10:AT+FTBC=0\r]
Mar 11 15:24:12.08: [  749]: --> [2:OK]
Mar 11 15:24:12.08: [  749]: <-- [10:AT+FBOR=0\r]
Mar 11 15:24:12.20: [  749]: --> [2:OK]
Mar 11 15:24:12.20: [  749]: <-- [13:AT+FPHCTO=30\r]
Mar 11 15:24:12.32: [  749]: --> [2:OK]
Mar 11 15:24:12.32: [  749]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r]
Mar 11 15:24:12.45: [  749]: --> [2:OK]
Mar 11 15:24:12.45: [  749]: <-- [16:AT+FLID="xxxxx"\r]
Mar 11 15:24:12.57: [  749]: --> [2:OK]
Mar 11 15:24:12.57: [  749]: DIAL xxxxxxxxxx
Mar 11 15:24:12.57: [  749]: <-- [16:ATDTxxxxxxxxxx@\r]
Mar 11 15:24:31.46: [  749]: --> [5:+FCON]
Mar 11 15:24:32.68: [  749]: --> [29:+FCSI: "      +xx xx xxxxxxx"]
Mar 11 15:24:32.68: [  749]: REMOTE CSI "+xx xx xxxxxxx"
Mar 11 15:24:33.02: [  749]: --> [22:+FDIS: 1,5,0,2,1,0,0,3]
Mar 11 15:24:33.13: [  749]: --> [2:OK]
Mar 11 15:24:33.13: [  749]: REMOTE best rate 14400 bit/s
Mar 11 15:24:33.13: [  749]: REMOTE max page width 1728 pixels in 215 mm
Mar 11 15:24:33.13: [  749]: REMOTE max unlimited page length 
Mar 11 15:24:33.13: [  749]: REMOTE best vres 7.7 line/mm
Mar 11 15:24:33.13: [  749]: REMOTE best format 2-D MR
Mar 11 15:24:33.13: [  749]: REMOTE best 10 ms/scanline
Mar 11 15:24:33.13: [  749]: USE 14400 bit/s
Mar 11 15:24:33.13: [  749]: USE 10 ms/scanline
Mar 11 15:24:33.13: [  749]: SEND file "docq/doc11906.ps;00"
Mar 11 15:24:33.14: [  749]: USE page width 1728 pixels in 215 mm
Mar 11 15:24:33.14: [  749]: USE unlimited page length 
Mar 11 15:24:33.14: [  749]: USE 3.85 line/mm
Mar 11 15:24:33.14: [  749]: USE 1-D MR
Mar 11 15:24:33.14: [  749]: <-- [24:AT+FDIS=0,5,0,2,0,0,0,3\r]
Mar 11 15:24:33.26: [  749]: --> [2:OK]
Mar 11 15:24:33.26: [  749]: <-- [7:AT+FDT\r]
Mar 11 15:24:41.10: [  749]: --> [22:+FDCS: 0,5,0,2,0,0,0,3]
Mar 11 15:24:41.10: [  749]: --> [7:CONNECT]
Mar 11 15:24:41.10: [  749]: SEND wait for XON
Mar 11 15:24:41.10: [  749]: --> [1:]
Mar 11 15:24:41.10: [  749]: SEND begin page
Mar 11 15:25:53.78: [  749]: SENT 144285 bytes of data
Mar 11 15:25:54.43: [  749]: SEND end page
Mar 11 15:25:55.16: [  749]: --> [2:OK]
Mar 11 15:25:55.16: [  749]: SEND send EOP (no more pages or documents)
Mar 11 15:25:55.16: [  749]: <-- [9:AT+FET=2\r]
Mar 11 15:26:08.85: [  749]: --> [9:+FHNG: 54]
Mar 11 15:26:08.85: [  749]: REMOTE HANGUP: No response to EOP repeated
3 times (code 54)
Mar 11 15:26:08.85: [  749]: SEND FAILED: JOB 11612 DEST xxxxxxxxxx ERR
No response to EOP repeated 3 times; too many attempts to send
Mar 11 15:26:08.85: [  749]: <-- [5:ATH0\r]
Mar 11 15:26:09.50: [  749]: --> [2:OK]
Mar 11 15:26:09.50: [  749]: SESSION END


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*




Project hosted by iFAX Solutions