HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users]



Hi

 

I am configuring Hylafax on a red hat v 7.2 machine.

 

From my workstation I can telnet to the linux box on 4559

 

I have configured the ip address for my subnet in the /var/spool/fax/etc/hosts and hosts.hfaxd files. They read as below

 

Localhost

127.0.0.1

#any user in the range of 10.0.*.*

10.0.15.239

 

I have run faxadduser and set a username and password. Syntax was

 

Faxadduser –p password dhathaway

 

The /var/spool/hylafax/hosts file exists and is set to r+w access and is mode 600. The user is set to UUCP. I have tried setting to Fax – Facsimile User but it defaults to UUCP

 

When I try and connect from the workstation I see “no status available” and the error is dhathaway logged in and the click Ok and then Port command is successful

 

I have tried lots of different configurations but can’t seem to get WHFC to work

 

Any help would be appreciated

 

thanks

 

Darren




Project hosted by iFAX Solutions