HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] sendfax conversion to .g3 fax



Dear ALL

I'm facing one typical problem with hylafax which I narrate as 
follows...

I've installed hylafax ver 4.1.5 on RedHat linux 7.3(Valhalla) 
kernel 2.4
I had absolutely no problems in installing any modules in the 
installation process

Now when I run  sendfax client from linux server  as follows..

sendfax 22667639  /etc/hosts1 , I get the following

Trying fax device '/dev/ttyS0'... OK.
Dialing 22667639... OK.
sending '/etc/test1'...
WARNING: are you sure that this is a G3 fax file? Doesn't seem to 
be...
ERROR: RTN: page bad - retrain requested
sending page again (retry 1)
sending '/etc/test1'...
WARNING: are you sure that this is a G3 fax file? Doesn't seem to 
be...
ERROR: RTN: page bad - retrain requested
sending page again (retry 2)
sending '/etc/test1'...
WARNING: are you sure that this is a G3 fax file? Doesn't seem to 
be...
ERROR: RTN: page bad - retrain requested
WARNING: maximum number of retries reached, going on

As I  see , the problem basically lies in the .g3 fax conversion 
by the server. Is it so??Am I right??

I was trying to go thro the web to get a idea as to what could be 
the reason for this as the server is supposed to convert any 
document to .g3 format, But I could not get a good solution for 
the same

For your information.  I've the following version of ghostscript

GNU Ghostscript 6.52 (2001-10-20)
Copyright (C) 2001 artofcode LLC, Benicia, CA.  All rights 
reserved.

Could anyone let me know what could be missing above.??

What else could be the problem and what should I do to arrive at a 
solution??

I'm stuck just because of this .

Expecting a reply

Snehal


I'M NOT A REGISTERED USER FOR THE MAILING LIST AND IS IN THE 
PROCESS OF
REGISTERING FOR THE SAME



____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*




Project hosted by iFAX Solutions