HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] Failure to receive silecne. Was (RE: Waiting for modem to come ready)



I installed the update, and now all receives are failing with "failure
to receive silence"



> -----Original Message-----
> From: Lee Howard [mailto:faxguy@howardsilvan.com] 
> Sent: Thursday, February 20, 2003 1:22 PM
> To: hylafax
> Subject: Re: [hylafax-users] Waiting for modem to come ready
> 
> 
> On 2003.02.20 11:10 hylafax wrote:
> > Is there a reason it just all of the sudden started happening?
> 
> Most likely one of the RedHat updates did it.  This problem 
> was chronic 
> with RedHat 7.3, and eventually the problem has probably 
> trickled down 
> into the lower versions as updates have provided the same 
> code found in 
> 7.3.  USR users were most affected, for some reason.  The problem 
> wasn't limited to HylaFAX, either.  mgetty suffered from the same 
> problem (different symptom, though the same cause).
> 
> I couldn't tell you exactly what it was, however.  You could always 
> reverse updates to find out.  It probably was something with 
> the serial 
> driver or devfs.
> 
> Lee.
> 


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*




Project hosted by iFAX Solutions