[hylafax-users] Problem with incoming data call

[Jone Haran <j.haran@hizkia.fr>]

Hello,
I am using hylafax version 4.1.3 in a SuSE Linux 8.1 distribution with a 
modem (Kortex Novafax 56000).
I have configured the fax server to send and receive faxes. I have no 
problem sending faxes but when i want to receive a fax it doesn't work 
whereas faxgetty is running. Actually  when a fax is sent to me, hylafax 
wich is in the "running and idle state" goes through the "listening to 
rings from modem" but never answer unless i use (manually) the 
"faxanswer" command. So when i receive a fax "manually" there is no 
problem but it seems to be a problem with faxgetty.
I think i have a problem with my configuration, please find below  an 
extract of /etc/inittab and my config.ttyS0 file :
Thank you for helping me

*/etc/inittab :*
"
# modem getty.
# mo:235:respawn:/usr/sbin/mgetty -s 38400 modem

# fax getty (hylafax)
# mo:35:respawn:/usr/lib/fax/faxgetty /dev/modem
mo:35:respawn:/usr/lib/fax/faxgetty /dev/ttyS0

# vbox (voice box) getty
# I6:35:respawn:/usr/sbin/vboxgetty -d /dev/ttyI6
# I7:35:respawn:/usr/sbin/vboxgetty -d /dev/ttyI7

# end of /etc/inittab
"

*/var/spool/fax/et/config.ttyS0*
"
AreaCode:        5
FAXNumber:        559122635
InternationalPrefix:    0
DialStringRules:    etc/dialrules
RecvFileMode:        644
LogFileMode:        644
DeviceMode:        644
SpeakerVolume:        off
GettyArgs:        "-h %l dx_%s"
LocalIdentifier:    "NothingSetup"
TagLineFont:        etc/lutRS18.pcf
TagLineFormat:        "De %%l|%c|Page %%P sur %%T"
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType:        Class2        # use class 2 interface
ModemRate:        19200
ModemFlowControl:    xonxoff        # default
ModemWaitForConnect:    yes        # wait for CONNECT on answer
#
#ModemResetCmds:    AT&F2        # what you want for a Supra
ModemNoFlowCmd:        AT&K        # disable flow control cmd
ModemHardFlowCmd:    AT&K3        # hardware flow control cmd
ModemSoftFlowCmd:    AT&K4        # software flow control cmd
ModemSetupDTRCmd:    AT&D3        # DTR off causes modem to reset
ModemSetupDCDCmd:    AT&C1        # DCD follows carrier
ModemSetupAACmd:    AT+FCLASS=0;+FAA=1 # enable in class 0
#
ModemSendFillOrder:    LSB2MSB        # as expected
ModemRecvFillOrder:    MSB2LSB        # opposite of what makes sense
Class2RecvDataTrigger:    "\022"        # a la 2388-B
"


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*