[hylafax-users] Problems with win clients: Hylafax call the number, then the line go down without sending nothing

[Roberto Re <Roberto.Re@cu.mi.it>]

Hi All,

I use WHFC and Cypheus as Windows* Client fax.
When I try to send a fax, the modem (USRobotics 56k Professional
Message) on Linux regularly calls the number, but after some second the
line go down without sending nothing ?

This is the log :

----------------------------
Jan 31 19:39:58.31: [10901]: SESSION BEGIN 00000048 39020256812820
Jan 31 19:39:58.31: [10901]: HylaFAX (tm) Version 4.1.5
Jan 31 19:39:58.31: [10901]: SEND FAX: JOB 35 DEST 0212345678 COMMID
00000048 DEVICE '/dev/ttyS0'
Jan 31 19:39:58.31: [10901]: DELAY 75 ms
Jan 31 19:39:58.39: [10901]: DELAY 2600 ms
Jan 31 19:40:00.99: [10901]: DELAY 10 ms
Jan 31 19:40:01.00: [10901]: <-- [4:ATZ\r]
Jan 31 19:40:01.14: [10901]: --> [2:OK]
Jan 31 19:40:01.14: [10901]: DELAY 3000 ms
Jan 31 19:40:04.14: [10901]: <-- [5:ATE0\r]
Jan 31 19:40:04.28: [10901]: --> [2:OK]
Jan 31 19:40:04.28: [10901]: <-- [5:ATV1\r]
Jan 31 19:40:04.42: [10901]: --> [2:OK]
Jan 31 19:40:04.42: [10901]: <-- [7:ATQ0X3\r]
Jan 31 19:40:04.56: [10901]: --> [2:OK]
Jan 31 19:40:04.56: [10901]: <-- [7:ATS0=0\r]
Jan 31 19:40:04.70: [10901]: --> [2:OK]
Jan 31 19:40:04.70: [10901]: <-- [7:ATS8=2\r]
Jan 31 19:40:04.84: [10901]: --> [2:OK]
Jan 31 19:40:04.84: [10901]: <-- [8:ATS7=60\r]
Jan 31 19:40:04.98: [10901]: --> [2:OK]
Jan 31 19:40:04.98: [10901]: <-- [12:AT&H2&I2&R1\r]
Jan 31 19:40:05.12: [10901]: --> [2:OK]
Jan 31 19:40:05.12: [10901]: <-- [11:ATS13=1&D2\r]
Jan 31 19:40:05.26: [10901]: --> [2:OK]
Jan 31 19:40:05.63: [10901]: <-- [6:AT&C1\r]
Jan 31 19:40:05.76: [10901]: --> [2:OK]
Jan 31 19:40:05.76: [10901]: <-- [12:AT+FCLASS=1\r]
Jan 31 19:40:05.90: [10901]: --> [2:OK]
Jan 31 19:40:05.90: [10901]: <-- [12:AT+FCLASS=0\r]
Jan 31 19:40:06.04: [10901]: --> [2:OK]
Jan 31 19:40:06.04: [10901]: <-- [5:ATM0\r]
Jan 31 19:40:06.18: [10901]: --> [2:OK]
Jan 31 19:40:06.18: [10901]: <-- [12:AT+FCLASS=1\r]
Jan 31 19:40:06.42: [10901]: --> [2:OK]
Jan 31 19:40:06.43: [10901]: DIAL 0212345678
Jan 31 19:40:06.43: [10901]: <-- [15:ATDT0212345678\r]
Jan 31 19:40:20.06: [10901]: --> [7:CONNECT]
Jan 31 19:40:21.35: [10901]: --> [2:OK]
Jan 31 19:40:21.35: [10901]: REMOTE NSF "AD 00 36 A0 00 00 00 00 38"
Jan 31 19:40:21.35: [10901]: NSF remote fax equipment: HP
Jan 31 19:40:21.35: [10901]: <-- [9:AT+FRH=3\r]
Jan 31 19:40:21.37: [10901]: --> [7:CONNECT]
Jan 31 19:40:22.04: [10901]: --> [2:OK]
Jan 31 19:40:22.04: [10901]: REMOTE CSI "0212345678"
Jan 31 19:40:22.04: [10901]: <-- [9:AT+FRH=3\r]
Jan 31 19:40:22.06: [10901]: --> [7:CONNECT]
Jan 31 19:40:22.50: [10901]: --> [2:OK]
Jan 31 19:40:22.50: [10901]: REMOTE best rate 33600 bit/s
Jan 31 19:40:22.50: [10901]: REMOTE max page width 1728 pixels in 215 mm
Jan 31 19:40:22.50: [10901]: REMOTE max unlimited page length
Jan 31 19:40:22.50: [10901]: REMOTE best vres 7.7 line/mm
Jan 31 19:40:22.50: [10901]: REMOTE best format 2-D MMR
Jan 31 19:40:22.50: [10901]: REMOTE supports T.30 Annex A, ECM
Jan 31 19:40:22.50: [10901]: REMOTE best 0 ms/scanline
Jan 31 19:40:22.50: [10901]: USE 14400 bit/s
Jan 31 19:40:22.50: [10901]: USE 0 ms/scanline
Jan 31 19:40:22.51: [10901]: <-- [9:AT+FTH=3\r]
Jan 31 19:40:22.70: [10901]: --> [7:CONNECT]
Jan 31 19:40:22.70: [10901]: <-- data [3]
Jan 31 19:40:22.70: [10901]: <-- data [2]
Jan 31 19:40:23.88: [10901]: --> [2:OK]
Jan 31 19:40:23.88: [10901]: <-- [5:ATH0\r]
Jan 31 19:40:24.12: [10901]: --> [2:OK]
Jan 31 19:40:24.12: [10901]: SESSION END
----------------------------



On the linux box the same configuration is always OK .

/usr/local/bin/sendfax -n -d 0212345678 /etc/passwd

----------------------------

Feb 01 08:30:14.34: [15228]: DIAL 0212345678
Feb 01 08:30:14.34: [15228]: <-- [15:ATDT0256812820\r]
Feb 01 08:30:28.30: [15228]: --> [7:CONNECT]
Feb 01 08:30:29.29: [15228]: --> [2:OK]
Feb 01 08:30:29.29: [15228]: REMOTE NSF "AD 00 36 A0 00 00 00 00 38"
Feb 01 08:30:29.29: [15228]: NSF remote fax equipment: HP
Feb 01 08:30:29.29: [15228]: <-- [9:AT+FRH=3\r]
Feb 01 08:30:29.31: [15228]: --> [7:CONNECT]
Feb 01 08:30:29.98: [15228]: --> [2:OK]
Feb 01 08:30:29.98: [15228]: REMOTE CSI "0212345678"
Feb 01 08:30:29.98: [15228]: <-- [9:AT+FRH=3\r]
Feb 01 08:30:30.00: [15228]: --> [7:CONNECT]
Feb 01 08:30:30.43: [15228]: --> [2:OK]
Feb 01 08:30:30.43: [15228]: REMOTE best rate 33600 bit/s
Feb 01 08:30:30.43: [15228]: REMOTE max page width 1728 pixels in 215 mm
Feb 01 08:30:30.43: [15228]: REMOTE max unlimited page length
Feb 01 08:30:30.43: [15228]: REMOTE best vres 7.7 line/mm
Feb 01 08:30:30.43: [15228]: REMOTE best format 2-D MMR
Feb 01 08:30:30.43: [15228]: REMOTE supports T.30 Annex A, ECM
Feb 01 08:30:30.43: [15228]: REMOTE best 0 ms/scanline
Feb 01 08:30:30.43: [15228]: USE 14400 bit/s
Feb 01 08:30:30.44: [15228]: USE 0 ms/scanline
Feb 01 08:30:30.44: [15228]: SEND file "docq/doc39.ps;70"
Feb 01 08:30:30.44: [15228]: USE page width 1728 pixels in 215 mm
Feb 01 08:30:30.44: [15228]: USE unlimited page length
Feb 01 08:30:30.44: [15228]: USE 3.85 line/mm
Feb 01 08:30:30.44: [15228]: USE 2-D MR
Feb 01 08:30:30.44: [15228]: SEND training at v.17 14400 bit/s
Feb 01 08:30:30.44: [15228]: <-- [9:AT+FTH=3\r]
Feb 01 08:30:30.64: [15228]: --> [7:CONNECT]
[..]
Feb 01 08:30:37.13: [15228]: TRAINING succeeded
Feb 01 08:30:37.13: [15228]: DELAY 75 ms
Feb 01 08:30:37.21: [15228]: <-- [11:AT+FTM=146\r]
Feb 01 08:30:37.47: [15228]: --> [7:CONNECT]
Feb 01 08:30:37.47: [15228]: SEND begin page
[..]
Feb 01 08:30:51.46: [15228]: <-- data [8]
[..]
Feb 01 08:30:53.56: [15228]: SEND send EOP (no more pages or documents)
Feb 01 08:30:56.28: [15228]: SEND recv MCF (message confirmation)
Feb 01 08:30:56.29: [15228]: SEND FAX (00000051): FROM root@sire TO
0212345678 (page 1 of 1 sent in 0:26)
Feb 01 08:30:56.29: [15228]: SEND FAX (00000051): FROM root@sire TO
0212345678 (docq/doc39.ps;70 sent in 0:26)
Feb 01 08:30:56.29: [15228]: <-- [9:AT+FTH=3\r]
Feb 01 08:30:56.49: [15228]: --> [7:CONNECT]
Feb 01 08:30:56.49: [15228]: <-- data [3]
Feb 01 08:30:56.49: [15228]: <-- data [2]
Feb 01 08:30:57.67: [15228]: --> [2:OK]
Feb 01 08:30:57.67: [15228]: <-- [5:ATH0\r]
Feb 01 08:30:57.91: [15228]: --> [2:OK]
Feb 01 08:30:57.91: [15228]: SESSION END
----------------------------

Thanks in Advance
Roberto


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*