[hylafax-users] Problem with TIFF attachment

["Anthony Engelbrecht" <anthonye@attunetech.com>]

Hi all,

I am a new user to Hylafax, actually evaluating it for a project.

I have installed and configured the basics, can receive a fax, but want to
add the TIFF attachment that goes to the FaxManager.  I have gone through
the Hylafax docs, but am battling to get it to work. I have added the
necessary uuencode script and configured it in the etc/FaxDispatch file as
per (http://www.hylafax.org/howto/delivery.php#ss4.2). I get a TIFF
attachment of only 59 bytes, and has nothing in it. The fax000??.tif file is
in the recvq directory, and if I manually uuencode and email it, it is 100%
fine. (Any ideas)

I am also battling to get outgoing faxes working, and keep get the
following. (I am sending an email with a TIFF attachment)
--------------------------------------------------------------------
Your facsimile job to 0836130033 was not sent because document conversion
to facsimile failed. The output from the converter program was:


Check any PostScript documents for non-standard fonts and invalid
constructs.
---- Unsent job status ----
Destination: 0836130033
JobID: 10
GroupID: 10
Sender: anthonye
Mailaddr: anthonye@attunetech.com
Submitted From: localhost
Page Width: 209 (mm)
Page Length: 296 (mm)
Resolution: 196 (lpi)
Status: (nothing available)
Dialogs: 0 (exchanges with remote device)
Dials: 0 (consecutive failed calls to destination)
Calls: 0 (total phone calls placed)
Pages: 0 (pages transmitted)
TotPages: 0 (total pages to transmit)
Attempts: 0 (attempts to send current page)
Dirnum: 0 (directory of next page to send)
---- Documents submitted for transmission ----
The following documents were submitted for transmission and are
available on the server for reuse until they are automatically
purged when this job is removed. Documents may also be manually
removed using the faxrm command; consult faxrm(1) for information.
Filename Size Type
docq/doc17.ps.10 9755 PostScript
---------------------------------------------------------

I can not even find this PostScript file on my system after the error.

I am now starting to feel very stupid at this point in time, any help would
greatly be appreciated.

Regards
Anthony Engelbrecht



____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*