Re: [hylafax-users] EOP second try... => my solution for the EOP/ MPS problem for nokia 6210

[Kurt Weiss <input.maillists@kwnet.at>]

Kurt Weiss schrieb...
> the only response to my first posting was: "try another faxsoftware..."
> i don't think that's the solution...
> so i bother u again :-)
> 
> i'm using a suse 7.3 server for SMS and FAX (SMS at time inactive until 
> fax is not running.
> hylafax version: 4.1.5 kernel version 2.4.10 (SMP)
> modem: nokia 6210 with serial connection (it's a class 1/2/2.0 modem)
> 
> all is running fine, but at the end of the first page, the connection 
> breaks with the message "No response to EOP repeated 3 times"
>  or "No response to MPS repeated 3 times"
> 
> has somebody an idea where the problem lies?


i've found a solution:

first u have to use class 2.0
then i found an article in the archives:
http://www.hylafax.org/archive/2000-09/msg00048.php
refering to:
http://www.hylafax.org/setup-advanced.php#Class2Liars
thx to "yohans"

so i modified
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Class2DCCQueryCmd:	!(0,1),(0-3),(0-4),(0-2),(0),(0),(0),(0-7)
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
(nokia/the handy provider seems to have a problem with compression or else)

so the data was correct, but the EOP/MPS problem was still here...

iv'e used the flag:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Class2SendRTC:		Yes
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

from now on, the fax sends correct!!!!!   yippppieeeeeee

here's the relevant part from the logfile:
***********widthout Class2SendRTC: Yes********************
Jan 30 16:57:44.04: [18270]: MODEM set XON/XOFF/DRAIN: input 
interpreted, output generated
Jan 30 16:57:46.44: [18270]: SEND end page
Jan 30 16:57:46.44: [18270]: SEND send MPS (more pages, same document)
Jan 30 16:57:46.44: [18270]: <-- data [2]
Jan 30 16:57:50.16: [18270]: --> [13:+FHT:FF 13 4F]
Jan 30 16:57:54.22: [18270]: --> [13:+FHT:FF 13 4F]
Jan 30 16:57:58.28: [18270]: --> [13:+FHT:FF 13 4F]
Jan 30 16:58:02.34: [18270]: --> [13:+FHT:FF 13 FB]
Jan 30 16:58:03.66: [18270]: --> [7:+FHS:52]
Jan 30 16:58:03.66: [18270]: REMOTE HANGUP: No response to MPS repeated 
3 times (code 52)
Jan 30 16:58:03.66: [18270]: <-- [5:ATH0\r]
Jan 30 16:58:04.14: [18270]: --> [2:OK]
**********************************************************
***********with Class2SendRTC: Yes************************
Jan 30 17:03:41.92: [18742]: MODEM set XON/XOFF/DRAIN: input 
interpreted, output generated
Jan 30 17:03:44.32: [18742]: SEND end page
Jan 30 17:03:44.32: [18742]: SEND send MPS (more pages, same document)
Jan 30 17:03:44.32: [18742]: <-- data [2]
Jan 30 17:03:48.07: [18742]: --> [13:+FHT:FF 13 4F]
Jan 30 17:03:53.03: [18742]: --> [19:+FHR:FF 13 8C A2 F1]
Jan 30 17:03:53.03: [18742]: --> [2:OK]
Jan 30 17:03:53.03: [18742]: <-- [8:AT+FPS?\r]
Jan 30 17:03:53.18: [18742]: --> [1:1]
Jan 30 17:03:53.18: [18742]: --> [2:OK]
Jan 30 17:03:53.18: [18742]: SEND recv MCF (message confirmation)
Jan 30 17:03:53.18: [18742]: SEND FAX (00000070): FROM info@kwnet.at TO 
0526687209 (page 1 of 4 sent in 0:43)
**********************************************************




____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*