HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] No carrier detected





Tom Smith schrieb:
> Sorry, OS is RedHat 7.2 running HylaFax 4.1.5.
> 
> Quoting Tom Smith <tom@openadventures.org>:
> 
> 
>>I'm averaging about a 40% failure rate on outbound faxes. The predominate
>>error 
>>is "No carrier detected. Attached is one of the session details--this is 
>>typical of the failure.
>>
>>Ideas?
>>
>>----------
>>Your facsimile job to 6025848446 failed because:
>>    No carrier detected
>>
>>    ---- Transcript of session follows ----
>>
>>Jan 29 13:34:08.17: [14415]: SESSION BEGIN 00000909 16026025848446
>>Jan 29 13:34:08.17: [14415]: HylaFAX (tm) Version 4.1.5
>>Jan 29 13:34:08.17: [14415]: SEND FAX: JOB 125 DEST 6025848446 COMMID
>>00000909 
>>DEVICE '/dev/ttyS0'
>>Jan 29 13:34:08.17: [14415]: DELAY 75 ms
>>Jan 29 13:34:08.25: [14415]: DELAY 2600 ms
>>Jan 29 13:34:10.85: [14415]: DELAY 10 ms
>>Jan 29 13:34:10.86: [14415]: <-- [4:ATZ\r]
>>Jan 29 13:34:11.00: [14415]: --> [2:OK]
>>Jan 29 13:34:11.00: [14415]: DELAY 3000 ms
>>Jan 29 13:34:14.00: [14415]: <-- [5:ATE0\r]
>>Jan 29 13:34:14.14: [14415]: --> [4:ATE0]
>>Jan 29 13:34:14.14: [14415]: --> [2:OK]
>>Jan 29 13:34:14.14: [14415]: <-- [5:ATV1\r]
>>Jan 29 13:34:14.28: [14415]: --> [2:OK]
>>Jan 29 13:34:14.28: [14415]: <-- [5:ATQ0\r]
>>Jan 29 13:34:14.42: [14415]: --> [2:OK]
>>Jan 29 13:34:14.42: [14415]: <-- [7:ATS0=0\r]
>>Jan 29 13:34:14.56: [14415]: --> [2:OK]
>>Jan 29 13:34:14.56: [14415]: <-- [7:ATS8=2\r]
>>Jan 29 13:34:14.70: [14415]: --> [2:OK]
>>Jan 29 13:34:14.70: [14415]: <-- [8:ATS7=60\r]
>>Jan 29 13:34:14.84: [14415]: --> [2:OK]
>>Jan 29 13:34:14.84: [14415]: <-- [12:AT+FCLASS=1\r]
>>Jan 29 13:34:14.98: [14415]: --> [2:OK]
>>Jan 29 13:34:14.98: [14415]: <-- [7:ATL0M1\r]
>>Jan 29 13:34:15.12: [14415]: --> [2:OK]
>>Jan 29 13:34:15.12: [14415]: <-- [12:AT+FCLASS=1\r]
>>Jan 29 13:34:15.36: [14415]: --> [2:OK]
>>Jan 29 13:34:15.36: [14415]: DIAL 6025848446
>>Jan 29 13:34:15.36: [14415]: <-- [15:ATDT6025848446\r]
>>Jan 29 13:35:11.53: [14415]: --> [10:NO CARRIER]
>>Jan 29 13:35:11.53: [14415]: SEND FAILED: JOB 125 DEST 6025848446 ERR No 
>>carrier detected
>>Jan 29 13:35:11.53: [14415]: <-- [5:ATH0\r]
>>Jan 29 13:35:11.77: [14415]: --> [2:OK]
>>Jan 29 13:35:11.77: [14415]: SESSION END
>>
>>    ---- Unsent job status ----
>>
>>   Destination: 6025848446
>>         JobID: 125
>>       GroupID: 125
>>        Sender: Tom Smith
>>      Mailaddr: faxadmin@uccinet.net
>>        CommID: 00000909
>>Submitted From: 192.168.20.248
>>    Page Width: 194 (mm)
>>   Page Length: 281 (mm)
>>    Resolution: 98 (lpi)
>>        Status: No carrier detected
>>       Dialogs: 0 (exchanges with remote device)
>>         Dials: 2 (consecutive failed calls to destination)
>>         Calls: 2 (total phone calls placed)
>>         Pages: 0 (pages transmitted)
>>      TotPages: 1 (total pages to transmit)
>>      Attempts: 0 (attempts to send current page)
>>        Dirnum: 0 (directory of next page to send)
>>----------
>>
>>Tom Smith
>>tom@openadventures.org
>>http://www.openadventures.org/

u can test an @ (=pause) at the end of the dial command in config.ttyX 
like discribed in the file:

here's a cut from my config.ttyS0
...
#
# We can append the "@" symbol to the dial string so that
# the modem will wait 5 seconds before attempting to connect
# and return result codes that distinguish between no carrier
# and no answer.  This makes it possible to avoid problems with
# repeatedly dialing a number that doesn't have a fax machine
# (kudos to Stuart Lynne for this trick.)
#
# NB: If you need to prefix phone numbers to get through a PBX,
#     put it in the ModemDialCmd; e.g. "DT9%s@".
#
ModemDialCmd:		ATDT%s		# T for tone dialing
#
...

>>
>>
>>
>>
>>
>>____________________ HylaFAX(tm) Users Mailing List _______________________
>>  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
>> On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
>>  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*
>>
> 
> 
> 
> ____________________ HylaFAX(tm) Users Mailing List _______________________
>   To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
>   *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*
> 
> 



____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*




Project hosted by iFAX Solutions