HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] MODEM WEDGED - Hylafax problem



Hi There

I got your email off the hylafax website, please could you help me with the
problem i am getting using hylafax.
Below is the messages i keep getting, and attached is my config file.

I am using a 14400 US Robotics Sportster modem.

Jan 23 15:07:30 violet FaxGetty[16036]: Unable to setup modem on /dev/ttyS0;
giving up after 2 attempts
Jan 23 15:07:30 violet FaxGetty[16036]: CLOSE /dev/ttyS0
Jan 23 15:07:30 violet FaxQueuer[184]: MODEM WEDGED: bin/wedged "ttyS0"
"/dev/ttyS0"
Jan 23 15:07:30 violet FaxGetty[16221]: OPEN /dev/ttyS0  HylaFAX (tm) Version
4.1.3
Jan 23 15:07:46 violet FaxGetty[16221]: /dev/ttyS0: Can not initialize modem.
Jan 23 15:10:01 violet FaxGetty[16603]: OPEN /dev/ttyS0  HylaFAX (tm) Version
4.1.3
Jan 23 15:10:17 violet FaxGetty[16603]: /dev/ttyS0: Can not initialize modem.
Jan 23 15:10:40 violet HylaFAX[16617]: HylaFAX INET Protocol Server:
restarted.
Jan 23 15:11:49 violet FaxGetty[16603]: Unable to setup modem on /dev/ttyS0;
giving up after 2 attempts
Jan 23 15:11:49 violet FaxGetty[16603]: CLOSE /dev/ttyS0
Jan 23 15:11:49 violet FaxQueuer[184]: MODEM WEDGED: bin/wedged "ttyS0"
"/dev/ttyS0"
Jan 23 15:11:49 violet FaxGetty[16636]: OPEN /dev/ttyS0  HylaFAX (tm) Version
4.1.3
Jan 23 15:12:05 violet FaxGetty[16636]: /dev/ttyS0: Can not initialize modem.

Thanks alot
Marc

-------------------------------------------------------


-- 
**********************************************
Marc Morgan
Senior Network Engineer
Sweidan Trust
Tel: 031 2675039
Fax: 031 2675169

**********************************************
root@violet:/usr/spool/hylafax/etc# more config.ttyS0
# $Id: att-dataport,v 1.2 2002/04/07 20:29:25 darren Exp $
#
# HylaFAX Facsimile Software
#
# Copyright (c) 1990-1996 Sam Leffler
# Copyright (c) 1991-1996 Silicon Graphics, Inc.
# HylaFAX is a trademark of Silicon Graphics, Inc.
#
# Permission to use, copy, modify, distribute, and sell this software and
# its documentation for any purpose is hereby granted without fee, provided
# that (i) the above copyright notices and this permission notice appear in
# all copies of the software and related documentation, and (ii) the names of
# Sam Leffler and Silicon Graphics may not be used in any advertising or
# publicity relating to the software without the specific, prior written
# permission of Sam Leffler and Silicon Graphics.
#
# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND,
# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY
# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
#
# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR
# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND,
# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF
# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
# OF THIS SOFTWARE.
#

#
# Configuration for using the Class 1 command interface with
# an AT&T DataPort 14.4 modem.  Firmware version 122 (ati1)
# or newer.
#
# Hardware flow control is used by default.
#
# Note that due to a bug in the 1.22 firmware the FCS bytes in the HDLC
# frames are NOT returned to the host.  This is fixed in versions 1.33
# and later.  To deal with this problem, early firmware revs should be
# sure to have Class1FrameOverhead set to 2 instead of the normal 4.
#
#
CountryCode:            27
AreaCode:               031
FAXNumber:              2675260
LongDistancePrefix:     1
InternationalPrefix:    0027
DialStringRules:        etc/dialrules
ServerTracing:          1
SessionTracing:         11
RecvFileMode:           0600
LogFileMode:            0600
DeviceMode:             0600
RingsBeforeAnswer:      2
SpeakerVolume:          medium
GettyArgs:              "-h %l dx_%s"
LocalIdentifier:        "Private Health Administrators"
TagLineFont:            etc/lutRS18.pcf
TagLineFormat:          "From %%l|%c|Page %%P of %%T"
NoCarrierRetrys:        3
MaxRecvPages:           25
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType:              Class1          # use class 1 interface
ModemRate:              19200
ModemFlowControl:       rtscts          # default
#
ModemHardFlowCmd:       AT&R0\D1\Q3     # use RTS/CTS and enable RS232 handling
ModemSoftFlowCmd:       AT&R1\D0\Q1     # use RTS/CTS and enable RS232 handling
ModemSetupDTRCmd:       AT&D2           # setup so DTR drop resets modem
ModemSetupDCDCmd:       AT&C1           # setup so DCD follows carrier
ModemSetupAACmd:        AT+FAA=0        # disable in case of Class 2 support
#
ModemMfrQueryCmd:       !AT&T
ModemModelQueryCmd:     !DataPort
ModemRevQueryCmd:       ATI19
#
# NB: this works around a bug in the 1.22 firmware; it is fixed
# in versions 1.33 and later in which case you can remove this
# line and use the default value of 4 (though leaving it as 2
# won't harm anything).
#
Class1FrameOverhead:    2               # 1.22 firmware does not include FCS
#
# The modem returns "OK" when there is a timeout before carrier is
# established.  This is treated as "NO CARRIER" by faxd.  Thus we
# need to up the NoCarrierRetrys parameter to avoid having the server
# reject jobs prematurely.
#
NoCarrierRetrys:        3               # retry 3 times on no carrier
#
PagerSetupCmds:         ATS41=10%B300   # use V.21 at 300 bps



Project hosted by iFAX Solutions