 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
[hylafax-users] T.30 T2 timeout, expected page not received
- To: <hylafax-users@hylafax.org>
- Subject: [hylafax-users] T.30 T2 timeout, expected page not received
- From: "Reza Kordi" <rkordi@4unet.net>
- Date: Tue, 21 Jan 2003 19:22:04 +0100
I got a problem
receiving faxes, T.30 T2 timeout, googled all possible messages and couldn’t
see how to solve this problem or where it’s coming from!
Any hints are appreciated.
HylaFAX v4.1.3
under Linux SuSe 8.1; ASUS V2.080-V90_2M_DLS
Jan 21
18:57:57.34: [ 998]:
SESSION BEGIN 00000047 41417830581
Jan 21
18:57:57.34: [ 998]:
HylaFAX (tm) Version 4.1.3
Jan 21
18:57:57.34: [ 998]:
<-- [4:ATA\r]
Jan 21
18:58:03.45: [ 998]:
--> [7:CONNECT]
Jan 21
18:58:03.45: [ 998]:
ANSWER: FAX CONNECTION DEVICE
'/dev/modem'
Jan 21
18:58:03.45: [ 998]:
MODEM input buffering enabled
Jan 21
18:58:03.45: [ 998]:
RECV FAX: begin
Jan 21
18:58:03.45: [ 998]:
RECV FAX: CDPN
Jan 21
18:58:03.45: [ 998]:
MODEM input buffering disabled
Jan 21
18:58:03.45: [ 998]:
<-- data [23]
Jan 21
18:58:03.45: [ 998]:
<-- data [2]
Jan 21
18:58:05.14: [ 998]:
--> [7:CONNECT]
Jan 21
18:58:05.14: [ 998]:
<-- data [10]
Jan 21
18:58:05.14: [ 998]:
<-- data [2]
Jan 21
18:58:05.67: [ 998]:
--> [2:OK]
Jan 21
18:58:05.67: [ 998]:
<-- [9:AT+FRH=3\r]
Jan 21
18:58:06.18: [ 998]:
--> [7:CONNECT]
Jan 21
18:58:07.65: [ 998]:
--> [2:OK]
Jan 21
18:58:07.65: [ 998]:
REMOTE TSI "R2K"
Jan 21
18:58:07.65: [ 998]:
<-- [9:AT+FRH=3\r]
Jan 21
18:58:07.68: [ 998]:
--> [7:CONNECT]
Jan 21
18:58:08.08: [ 998]:
--> [2:OK]
Jan 21
18:58:08.08: [ 998]:
REMOTE wants 14400 bit/s
Jan 21
18:58:08.08: [ 998]:
REMOTE wants page width 1728 pixels in 215 mm
Jan 21
18:58:08.08: [ 998]:
REMOTE wants unlimited page length
Jan 21 18:58:08.08:
[ 998]: REMOTE
wants 7.7 line/mm
Jan 21
18:58:08.08: [ 998]:
REMOTE wants 2-D MR
Jan 21
18:58:08.08: [ 998]:
RECV training at v.17 14400 bit/s
Jan 21
18:58:08.08: [ 998]:
<-- [11:AT+FRM=145\r]
Jan 21
18:58:09.92: [ 998]:
--> [7:CONNECT]
Jan 21
18:58:12.80: [ 998]:
MODEM TIMEOUT: receiving TCF
Jan 21
18:58:12.80: [ 998]:
<-- data [1]
Jan 21
18:58:12.82: [ 998]:
--> [10:NO CARRIER]
Jan 21
18:58:12.82: [ 998]:
MODEM No carrier
Jan 21
18:58:12.82: [ 998]:
RECV: TCF 2763 bytes, 2% non-zero, 2700 zero-run
Jan 21
18:58:42.82: [ 998]:
MODEM TIMEOUT: reading line from modem
Jan 21
18:58:42.82: [ 998]:
MODEM <Empty line>
Jan 21
18:58:42.82: [ 998]:
DELAY 75 ms
Jan 21
18:58:42.90: [ 998]:
TRAINING succeeded
Jan 21
18:58:42.90: [ 998]:
<-- [9:AT+FTH=3\r]
Jan 21
18:58:42.97: [ 998]:
--> [7:CONNECT]
Jan 21
18:58:42.97: [ 998]:
<-- data [3]
Jan 21
18:58:42.97: [ 998]:
<-- data [2]
Jan 21
18:58:44.28: [ 998]:
--> [2:OK]
Jan 21
18:58:44.39: [ 998]:
MODEM input buffering enabled
Jan 21
18:58:44.39: [ 998]:
<-- [11:AT+FRM=146\r]
Jan 21
18:58:51.39: [ 998]:
MODEM TIMEOUT: reading line from modem
Jan 21
18:58:51.39: [ 998]:
MODEM input buffering disabled
Jan 21
18:58:51.39: [ 998]:
<-- data [1]
Jan 21 18:58:51.41:
[ 998]: -->
[2:OK]
Jan 21
18:58:51.41: [ 998]:
RECV FAX (00000047): recvq/fax00027.tif from R2K, r
oute to <unspecified>, 0 pages in 0:48
Jan 21
18:58:51.41: [ 998]:
RECV FAX: T.30 T2 timeout, expected page not receiv
ed
Jan 21
18:58:51.41: [ 998]:
<-- [9:AT+FTH=3\r]
Jan 21
18:58:51.48: [ 998]:
--> [7:CONNECT]
Jan 21
18:58:51.48: [ 998]:
<-- data [3]
Jan 21
18:58:51.48: [ 998]:
<-- data [2]
Jan 21
18:58:52.79: [ 998]:
--> [2:OK]
Jan 21
18:58:52.79: [ 998]:
MODEM input buffering enabled
Jan 21 18:58:52.79:
[ 998]: RECV
FAX (00000047): session with R2K terminated ab
normally: T.30 T2 timeout, expected page not received
Jan 21
18:58:52.79: [ 998]:
RECV FAX: bin/faxrcvd "recvq/fax00027.tif"
"modem"
"00000047"
"T.30 T2 timeout, expected page not received" ""
"" ""
Jan 21
18:58:52.88: [ 998]:
RECV FAX: end
Jan 21
18:58:52.88: [ 998]:
SESSION END
Mit freundlichen
Grüssen
Best Regards
Meilleures Salutations
med vennlig hilsen
--------------------------------
44 Reza Kordi
444 EVERNET
AG
4444 Techincal
Director
44444unet Geroldstr. 28
44 CH-8005
Zürich
+41 (78)
8700230.........
+41 ( 1) 4469300..........Phone
+41 ( 1) 4469331............Fax
reza.kordi@evernet.ch.....Email
www.evernet.ch
-------Not
just solutions,------
--------Clever Solutions--------
- Follow-Ups:
- Re: [hylafax-users] T.30 T2 timeout, expected page not received
- From: Lee Howard
- Re: [hylafax-users] T.30 T2 timeout, expected page not received
- Prev by Date: Re: [hylafax-users] Mac OS X Install questions...
- Next by Date: Re: [hylafax-users] T.30 T2 timeout, expected page not received
- Previous by thread: [hylafax-users] Can't Download Sourcecode....
- Next by thread: Re: [hylafax-users] T.30 T2 timeout, expected page not received
- Index(es):