Re: [hylafax-users] Missing TSI on receiver's side and fax-number in faxstat

[Nico Decker <ndecker-hylafax@dezidata.de>]

> >
> > The TagLineFormat is only for RECEIVING fax; it will
> > be printed
> > on top of every incoming fax.
>
> You're wrong. Read man hylafax-config.
>

I read it very often, believe me! ;-)
The man page uses the term "transmitted pages", that's not correct,
as far as I know. It should be "received pages". The Identifier-strings
(FAXNumber AND LocalIdentifier) are transferred plain text in the
fax-protocol, not graphical; they are not part of the tiff-file! In class1-
mode these id-strings are transmitted after the first connect, in class2-
mode there exists a special AT-command (+FLID) ...
The receiver gets the fax (picture) and puts the TagLineFormat on top,
replacing all variables (pagenumber, sender, etc.). 

BUT ANYWAY: TagLineFormat and -Font has been set correctly all the
time. 
So they are unlikely the reason for my problem.

> LocalIdentifier I use it for our company name but you
> can use it for your fax number.

I tried to set it to text, to a number. No success.

>
> > I tried them
> > too with no success.
> > My last attempt was to put a link in
> > /var/spool/hylafax/etc/getty-link ->
> > /sbin/mgetty
> > and to leave the preconfigured GettyArgs untouched
> > ("-r -b %l"). Also
> > no success.
> >


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*