 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
Re: [hylafax-users] Help! No response to EOP repeated 3 times
- To: hylafax-users@hylafax.org
- Subject: Re: [hylafax-users] Help! No response to EOP repeated 3 times
- From: Paul Lorah <paul@macmaverick.net>
- Cc: tech@usacustom.com
- Date: Tue, 7 Jan 2003 08:37:31 -0500
> >Post your log file so others can see what the error messages are. > Here is the log from a typical fax that fails from a modem on the serial card Jan 14 09:28:07.45: [ 414]: SESSION BEGIN 00000075 16106103378290 Jan 14 09:28:07.45: [ 414]: HylaFAX (tm) Version 4.1.3 Jan 14 09:28:07.45: [ 414]: SEND FAX: JOB 52 DEST 6103378290 COMMID 00000075 DEVICE '/dev/ttyS4' Jan 14 09:28:07.45: [ 414]: DELAY 75 ms Jan 14 09:28:07.53: [ 414]: DELAY 2600 ms Jan 14 09:28:10.13: [ 414]: <-- [4:ATZ\r] Jan 14 09:28:10.33: [ 414]: --> [2:OK] Jan 14 09:28:10.33: [ 414]: DELAY 3000 ms Jan 14 09:28:13.33: [ 414]: <-- [5:ATE0\r] Jan 14 09:28:13.48: [ 414]: --> [4:ATE0] Jan 14 09:28:13.48: [ 414]: --> [2:OK] Jan 14 09:28:13.48: [ 414]: <-- [5:ATV1\r] Jan 14 09:28:13.63: [ 414]: --> [2:OK] Jan 14 09:28:13.63: [ 414]: <-- [5:ATQ0\r] Jan 14 09:28:13.78: [ 414]: --> [2:OK] Jan 14 09:28:13.78: [ 414]: <-- [7:ATS0=0\r] Jan 14 09:28:13.93: [ 414]: --> [2:OK] Jan 14 09:28:13.93: [ 414]: <-- [7:ATS8=2\r] Jan 14 09:28:14.08: [ 414]: --> [2:OK] Jan 14 09:28:14.08: [ 414]: <-- [8:ATS7=60\r] Jan 14 09:28:14.23: [ 414]: --> [2:OK] Jan 14 09:28:14.23: [ 414]: <-- [6:AT&K4\r] Jan 14 09:28:14.37: [ 414]: --> [2:OK] Jan 14 09:28:14.37: [ 414]: <-- [6:AT&D3\r] Jan 14 09:28:14.51: [ 414]: --> [2:OK] Jan 14 09:28:14.51: [ 414]: <-- [6:AT&C1\r] Jan 14 09:28:14.66: [ 414]: --> [2:OK] Jan 14 09:28:14.66: [ 414]: <-- [12:AT+FCLASS=2\r] Jan 14 09:28:14.81: [ 414]: --> [2:OK] Jan 14 09:28:14.81: [ 414]: <-- [10:AT+FTBC=0\r] Jan 14 09:28:14.96: [ 414]: --> [2:OK] Jan 14 09:28:14.96: [ 414]: <-- [10:AT+FBOR=0\r] Jan 14 09:28:15.11: [ 414]: --> [2:OK] Jan 14 09:28:15.11: [ 414]: <-- [13:AT+FPHCTO=30\r] Jan 14 09:28:15.26: [ 414]: --> [2:OK] Jan 14 09:28:15.26: [ 414]: <-- [24:AT+FDCC=1,3,2,2,1,0,0,0\r] Jan 14 09:28:15.42: [ 414]: --> [2:OK] Jan 14 09:28:15.42: [ 414]: <-- [5:ATM0\r] Jan 14 09:28:15.57: [ 414]: --> [2:OK] Jan 14 09:28:15.57: [ 414]: <-- [12:AT+FCLASS=2\r] Jan 14 09:28:15.82: [ 414]: --> [2:OK] Jan 14 09:28:15.82: [ 414]: <-- [10:AT+FTBC=0\r] Jan 14 09:28:16.07: [ 414]: --> [2:OK] Jan 14 09:28:16.07: [ 414]: <-- [10:AT+FBOR=0\r] Jan 14 09:28:16.32: [ 414]: --> [2:OK] Jan 14 09:28:16.32: [ 414]: <-- [13:AT+FPHCTO=30\r] Jan 14 09:28:16.57: [ 414]: --> [2:OK] Jan 14 09:28:16.57: [ 414]: <-- [24:AT+FDCC=1,3,2,2,1,0,0,0\r] Jan 14 09:28:16.83: [ 414]: --> [2:OK] Jan 14 09:28:16.83: [ 414]: <-- [23:AT+FLID="NothingSetup"\r] Jan 14 09:28:17.09: [ 414]: --> [2:OK] Jan 14 09:28:17.09: [ 414]: DIAL 6103378290 Jan 14 09:28:17.09: [ 414]: <-- [15:ATDT6103378290\r] Jan 14 09:28:45.96: [ 414]: --> [5:+FCON] Jan 14 09:28:47.73: [ 414]: --> [22:+FDIS: 1,3,0,2,1,0,0,5] Jan 14 09:28:47.73: [ 414]: --> [2:OK] Jan 14 09:28:47.73: [ 414]: REMOTE best rate 9600 bit/s Jan 14 09:28:47.73: [ 414]: REMOTE max page width 1728 pixels in 215 mm Jan 14 09:28:47.73: [ 414]: REMOTE max unlimited page length Jan 14 09:28:47.73: [ 414]: REMOTE best vres 7.7 line/mm Jan 14 09:28:47.73: [ 414]: REMOTE best format 2-D MR Jan 14 09:28:47.73: [ 414]: REMOTE best 20 ms/scanline Jan 14 09:28:47.73: [ 414]: USE 9600 bit/s Jan 14 09:28:47.73: [ 414]: USE 20 ms/scanline Jan 14 09:28:47.73: [ 414]: SEND file "docq/doc45.ps;70" Jan 14 09:28:47.73: [ 414]: USE page width 1728 pixels in 215 mm Jan 14 09:28:47.73: [ 414]: USE unlimited page length Jan 14 09:28:47.73: [ 414]: USE 3.85 line/mm Jan 14 09:28:47.73: [ 414]: USE 2-D MR Jan 14 09:28:47.73: [ 414]: <-- [24:AT+FDIS=0,3,0,2,1,0,0,5\r] Jan 14 09:28:47.99: [ 414]: --> [2:OK] Jan 14 09:28:47.99: [ 414]: <-- [7:AT+FDT\r] Jan 14 09:28:57.01: [ 414]: --> [22:+FDCS: 0,3,0,2,1,0,0,5] Jan 14 09:28:57.22: [ 414]: --> [7:CONNECT] Jan 14 09:28:57.22: [ 414]: SEND wait for XON Jan 14 09:28:57.22: [ 414]: --> [1:] Jan 14 09:28:57.22: [ 414]: SEND begin page Jan 14 09:28:57.22: [ 414]: <-- data [1026] Jan 14 09:28:57.22: [ 414]: <-- data [1035] Jan 14 09:28:57.22: [ 414]: <-- data [1040] Jan 14 09:28:57.22: [ 414]: <-- data [1036] Jan 14 09:28:57.22: [ 414]: <-- data [1043] Jan 14 09:28:58.94: [ 414]: <-- data [1029] Jan 14 09:29:00.05: [ 414]: <-- data [1031] Jan 14 09:29:01.54: [ 414]: <-- data [1035] Jan 14 09:29:01.54: [ 414]: <-- data [1034] Jan 14 09:29:03.06: [ 414]: <-- data [1049] Jan 14 09:29:04.38: [ 414]: <-- data [1040] Jan 14 09:29:05.68: [ 414]: <-- data [1032] Jan 14 09:29:05.68: [ 414]: <-- data [1048] Jan 14 09:29:06.91: [ 414]: <-- data [1033] Jan 14 09:29:08.55: [ 414]: <-- data [1037] Jan 14 09:29:10.40: [ 414]: <-- data [1034] Jan 14 09:29:10.40: [ 414]: <-- data [1041] Jan 14 09:29:12.17: [ 414]: <-- data [1031] Jan 14 09:29:13.45: [ 414]: <-- data [1034] Jan 14 09:29:15.21: [ 414]: <-- data [1031] Jan 14 09:29:15.21: [ 414]: <-- data [1035] Jan 14 09:29:16.24: [ 414]: <-- data [1039] Jan 14 09:29:17.45: [ 414]: <-- data [1041] Jan 14 09:29:19.15: [ 414]: <-- data [1040] Jan 14 09:29:19.15: [ 414]: <-- data [1029] Jan 14 09:29:20.69: [ 414]: <-- data [241] Jan 14 09:29:20.69: [ 414]: SENT 25838 bytes of data Jan 14 09:29:20.69: [ 414]: <-- data [2] Jan 14 09:29:24.80: [ 414]: SEND end page Jan 14 09:29:25.04: [ 414]: --> [2:OK] Jan 14 09:29:25.04: [ 414]: SEND send EOP (no more pages or documents) Jan 14 09:29:25.04: [ 414]: <-- [9:AT+FET=2\r] Jan 14 09:29:42.88: [ 414]: --> [9:+FHNG: 54] Jan 14 09:29:42.88: [ 414]: REMOTE HANGUP: No response to EOP repeated 3 times (code 54) Jan 14 09:29:42.88: [ 414]: <-- [5:ATH0\r] Jan 14 09:29:42.88: [ 414]: --> [2:OK] Jan 14 09:29:42.89: [ 414]: SESSION END Thanks! Paul Lorah >-- >Cam Coble, A+, Network+ >IT Manager >Roanoke Stamp >www.usacustom.com > > "any sufficiently advanced technology > is indistinguishable from magic." > -- Arthur C. Clark > >____________________ HylaFAX(tm) Users Mailing List _______________________ > To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi > On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null > *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.* -- ____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*
- Follow-Ups:
- Re: [hylafax-users] Help! No response to EOP repeated 3 times
- From: Lee Howard
- Re: [hylafax-users] Help! No response to EOP repeated 3 times
- References:
- [hylafax-users] Help! No response to EOP repeated 3 times
- From: Paul Lorah
- Re: [hylafax-users] Help! No response to EOP repeated 3 times
- From: Cam Coble
- Re: [hylafax-users] Help! No response to EOP repeated 3 times
- From: Cam Coble
- [hylafax-users] Help! No response to EOP repeated 3 times
- Prev by Date: [hylafax-users] Help! No response to EOP repeated 3 times
- Next by Date: [hylafax-users] Pb with sending faxes from win client
- Previous by thread: Re: [hylafax-users] Help! No response to EOP repeated 3 times
- Next by thread: Re: [hylafax-users] Help! No response to EOP repeated 3 times
- Index(es):
Project hosted by iFAX Solutions