HylaFAX The world's
most advanced open source fax server
|
|
[
Date Prev][
Date Next][
Thread Prev][
Thread Next]
[
Date Index]
[
Thread Index]
[hylafax-users] MODEM TIMEOUT: reading line from modem
Hello,
if I receive fax with few text in 1 page, all is OK. I can receive
more "small" pages too. But if fax receives page A4 with full page of text,
I get the error
MODEM TIMEOUT: reading line from modem
Can someone help me?
I have RedHat 8.0, hylafax 4.1.5 and Microcom DeskPorte 56k Voice.
Session log:
Jan 02 09:15:04.20: [21828]: SESSION BEGIN 00000086 420244466830
Jan 02 09:15:04.20: [21828]: HylaFAX (tm) Version 4.1.5
Jan 02 09:15:04.20: [21828]: <-- [4:ATA\r]
Jan 02 09:15:08.56: [21828]: --> [3:FAX]
Jan 02 09:15:14.18: [21828]: --> [5:+FCON]
Jan 02 09:15:14.18: [21828]: ANSWER: FAX CONNECTION DEVICE '/dev/ttyS0'
Jan 02 09:15:14.18: [21828]: MODEM input buffering enabled
Jan 02 09:15:14.18: [21828]: RECV FAX: begin
Jan 02 09:15:15.80: [21828]: --> [29:+FTSI: " +420 2 33090334"]
Jan 02 09:15:15.80: [21828]: REMOTE TSI "+420 2 33090334"
Jan 02 09:15:16.12: [21828]: --> [22:+FDCS: 0,5,0,2,0,0,0,1]
Jan 02 09:15:16.12: [21828]: REMOTE wants 14400 bit/s
Jan 02 09:15:16.12: [21828]: REMOTE wants page width 1728 pixels in 215 mm
Jan 02 09:15:16.12: [21828]: REMOTE wants unlimited page length
Jan 02 09:15:16.12: [21828]: REMOTE wants 3.85 line/mm
Jan 02 09:15:16.12: [21828]: REMOTE wants 1-D MR
Jan 02 09:15:16.23: [21828]: --> [2:OK]
Jan 02 09:15:16.23: [21828]: <-- [7:AT+FDR\r]
Jan 02 09:15:19.12: [21828]: --> [5:+FCFR]
Jan 02 09:15:21.23: [21828]: --> [22:+FDCS: 0,5,0,2,0,0,0,1]
Jan 02 09:15:21.23: [21828]: REMOTE wants 14400 bit/s
Jan 02 09:15:21.23: [21828]: REMOTE wants page width 1728 pixels in 215 mm
Jan 02 09:15:21.23: [21828]: REMOTE wants unlimited page length
Jan 02 09:15:21.23: [21828]: REMOTE wants 3.85 line/mm
Jan 02 09:15:21.23: [21828]: REMOTE wants 1-D MR
Jan 02 09:15:21.23: [21828]: --> [7:CONNECT]
Jan 02 09:15:21.23: [21828]: RECV: begin page
Jan 02 09:15:21.23: [21828]: MODEM set XON/XOFF/FLUSH: input ignored, output generated
Jan 02 09:15:21.23: [21828]: RECV: send trigger 022
Jan 02 09:15:21.23: [21828]: <-- data [1]
Jan 02 09:15:47.03: [21828]: RECV: 1147 total lines, 0 bad lines, 0 consecutive bad lines
Jan 02 09:15:47.03: [21828]: MODEM set XON/XOFF/DRAIN: input interpreted, output disabled
Jan 02 09:15:47.03: [21828]: --> [17:+FPTS: 1,2219,0,0]
Jan 02 09:15:48.80: [21828]: --> [8:+FHNG: 0]
Jan 02 09:15:48.80: [21828]: REMOTE HANGUP: Normal and proper end of connection (code 0)
Jan 02 09:15:50.62: [21828]: --> [2:OK]
Jan 02 09:15:50.62: [21828]: RECV recv MPS (more pages, same document)
Jan 02 09:16:20.62: [21828]: MODEM TIMEOUT: reading line from modem
Jan 02 09:16:20.62: [21828]: MODEM <Timeout>
Jan 02 09:16:20.62: [21828]: RECV FAX (00000086): recvq/fax00045.tif from +420 2 33090334, route to <unspecified>, 0 pages in 1:06
Jan 02 09:16:20.63: [21828]: RECV FAX: Normal and proper end of connection
Jan 02 09:16:20.64: [21828]: RECV FAX (00000086): session with +420 2 33090334 terminated abnormally: Normal and proper
end of connection
Jan 02 09:16:20.64: [21828]: RECV FAX: bin/faxrcvd "recvq/fax00045.tif" "ttyS0" "00000086" "Normal and proper end of connection" "" ""
Jan 02 09:16:20.86: [21828]: RECV FAX: end
Jan 02 09:16:20.86: [21828]: SESSION END
~
--
Hrdlickova Iveta, CPE s.r.o.
Telefon: +420 2 41018505
Eurotel: +420 724 062862
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*