![]() |
Hi, I hope anybody can help me please ! I send a SMS via sendpage, but only one time here is my log - this sms ( the only one ) was ok Nov 25 10:40:56.26: [ 9423]: SESSION BEGIN 00000009 49213101771167 Nov 25 10:40:56.26: [ 9423]: HylaFAX (tm) Version 4.1.5 Nov 25 10:40:56.26: [ 9423]: SEND PAGE: JOB 11 DEST 01771167 COMMID 00000009 Nov 25 10:40:56.26: [ 9423]: DELAY 75 ms Nov 25 10:40:56.35: [ 9423]: DELAY 2600 ms Nov 25 10:40:58.96: [ 9423]: DELAY 10 ms Nov 25 10:40:58.99: [ 9423]: <-- [4:ATZ\r] Nov 25 10:40:59.29: [ 9423]: --> [3:ATZ] Nov 25 10:40:59.29: [ 9423]: --> [2:OK] Nov 25 10:40:59.29: [ 9423]: DELAY 3000 ms Nov 25 10:41:02.30: [ 9423]: <-- [5:ATX3\r] Nov 25 10:41:02.47: [ 9423]: --> [4:ATX3] Nov 25 10:41:02.47: [ 9423]: --> [2:OK] Nov 25 10:41:02.47: [ 9423]: <-- [5:ATE0\r] Nov 25 10:41:02.66: [ 9423]: --> [4:ATE0] Nov 25 10:41:02.66: [ 9423]: --> [2:OK] Nov 25 10:41:02.66: [ 9423]: <-- [5:ATV1\r] Nov 25 10:41:02.84: [ 9423]: --> [2:OK] Nov 25 10:41:02.84: [ 9423]: <-- [7:ATQ0X4\r] Nov 25 10:41:03.05: [ 9423]: --> [2:OK] Nov 25 10:41:03.05: [ 9423]: <-- [7:ATS0=0\r] Nov 25 10:41:03.23: [ 9423]: --> [2:OK] Nov 25 10:41:03.23: [ 9423]: <-- [7:ATS8=2\r] Nov 25 10:41:03.40: [ 9423]: --> [2:OK] Nov 25 10:41:03.40: [ 9423]: <-- [8:ATS7=60\r] Nov 25 10:41:03.58: [ 9423]: --> [2:OK] Nov 25 10:41:03.58: [ 9423]: <-- [12:AT&H1&I0&R2\r] Nov 25 10:41:03.76: [ 9423]: --> [2:OK] Nov 25 10:41:03.76: [ 9423]: <-- [11:ATS13=1&D2\r] Nov 25 10:41:03.94: [ 9423]: --> [2:OK] Nov 25 10:41:03.94: [ 9423]: <-- [6:AT&C1\r] Nov 25 10:41:04.12: [ 9423]: --> [2:OK] Nov 25 10:41:04.12: [ 9423]: <-- [5:ATM0\r] Nov 25 10:41:04.32: [ 9423]: --> [2:OK] Nov 25 10:41:04.36: [ 9423]: <-- [12:AT+FCLASS=0\r] Nov 25 10:41:04.52: [ 9423]: --> [2:OK] Nov 25 10:41:04.52: [ 9423]: DIAL 01771167 Nov 25 10:41:04.52: [ 9423]: <-- [17:ATX3DT0,01771167\r] Nov 25 10:41:26.21: [ 9423]: --> [26:CONNECT 19200/ARQ/V34/LAPM] Nov 25 10:41:26.21: [ 9423]: EXPECT ID (paging central identification) Nov 25 10:41:32.24: [ 9423]: RECV ID ("ID=ID=") Nov 25 10:41:32.24: [ 9423]: SEND device identification/login request Nov 25 10:41:32.82: [ 9423]: RECV ACK (login successful) Nov 25 10:41:32.82: [ 9423]: RECV go-ahead (prologue done) Nov 25 10:41:32.82: [ 9423]: SEND message block Nov 25 10:41:34.11: [ 9423]: RECV: Message 40460532 send successful - message submitted for processing Nov 25 10:41:34.11: [ 9423]: RECV ACK (message block accepted) Nov 25 10:41:34.59: [ 9423]: RECV EOT (disconnect) Nov 25 10:41:34.60: [ 9423]: SEND PAGE: FROM root@skiathos TO 01771167 (sent in 0:30) Nov 25 10:41:34.60: [ 9423]: <-- [5:ATH0\r] Nov 25 10:41:35.44: [ 9423]: --> [10:NO CARRIER] Nov 25 10:41:35.44: [ 9423]: MODEM No carrier Nov 25 10:41:35.62: [ 9423]: SESSION END at this moment when I try faxstat I get this message: HylaFAX scheduler on skiathos: Running Modem cua/a (+49.2131.911387): Waiting for modem to come ready I turn the modem off and on / restart the deamon and so on .... nothing! I can connect to the modem via tip and I can call a number What is here happend ??? Mit freundlichen Gr�ssen Sven Jansen -- Technik Sven.Jansen@eum.de ebner & martin Informationssysteme GmbH http://www.eum.de Furtherhofstr.1a fon: +49 2131 527393-10 D-41462 Neuss fax: +49 2131 527393-93 ____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*