[hylafax-users] Phase D Error

[Louis Chau <louis_chau@midstream.com.hk>]

Dear all,

I have posted the problem before but nobody answer my question, now my
problem is happened again, pls help.

I am using RedHat Linux 7.1 and Hylafax version 4.1.5 and using WHFC
client to receive fax.

My client send fax to me and always disconnected. This problem has been
happened before but however, no problem again. But now, it happen again.
Attached is my log file.

Any help would be very appreciated.

-- 
Best Regards,
Louis
Email: louis_chau@midstream.com.hk
Web  : http://www.midstream.com.hk
Nov 08 16:04:24.05: [  871]: SESSION BEGIN 00000462 852026196710
Nov 08 16:04:24.05: [  871]: HylaFAX (tm) Version 4.1.5
Nov 08 16:04:24.05: [  871]: <-- [4:ATA\r]
Nov 08 16:04:33.97: [  871]: --> [11:CONNECT FAX]
Nov 08 16:04:33.97: [  871]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS0'
Nov 08 16:04:33.98: [  871]: RECV FAX: begin
Nov 08 16:04:33.98: [  871]: --> [5:+FCON]
Nov 08 16:04:37.62: [  871]: --> [27:+FTSI:                     ]
Nov 08 16:04:37.62: [  871]: REMOTE TSI ""
Nov 08 16:04:37.62: [  871]: --> [21:+FDCS:1,5,0,2,1,0,0,0]
Nov 08 16:04:37.62: [  871]: REMOTE wants 14400 bit/s
Nov 08 16:04:37.62: [  871]: REMOTE wants page width 1728 pixels in 215 mm
Nov 08 16:04:37.62: [  871]: REMOTE wants unlimited page length 
Nov 08 16:04:37.62: [  871]: REMOTE wants 7.7 line/mm
Nov 08 16:04:37.62: [  871]: REMOTE wants 2-D MR
Nov 08 16:04:37.62: [  871]: --> [2:OK]
Nov 08 16:04:37.62: [  871]: <-- [7:AT+FDR\r]
Nov 08 16:04:39.24: [  871]: --> [5:+FCFR]
Nov 08 16:04:39.24: [  871]: --> [27:+FTSI:                     ]
Nov 08 16:04:39.24: [  871]: REMOTE TSI ""
Nov 08 16:04:39.24: [  871]: --> [21:+FDCS:1,5,0,2,1,0,0,0]
Nov 08 16:04:39.24: [  871]: REMOTE wants 14400 bit/s
Nov 08 16:04:39.24: [  871]: REMOTE wants page width 1728 pixels in 215 mm
Nov 08 16:04:39.24: [  871]: REMOTE wants unlimited page length 
Nov 08 16:04:39.24: [  871]: REMOTE wants 7.7 line/mm
Nov 08 16:04:39.24: [  871]: REMOTE wants 2-D MR
Nov 08 16:04:40.36: [  871]: --> [7:CONNECT]
Nov 08 16:04:40.36: [  871]: RECV: begin page
Nov 08 16:04:40.36: [  871]: RECV: send trigger 022
Nov 08 16:04:40.36: [  871]: <-- data [1]
Nov 08 16:04:41.33: [  871]: RECV: 0 total lines, 0 bad lines, 0 consecutive bad lines
Nov 08 16:04:41.33: [  871]: --> [7:+FPTS:1]
Nov 08 16:04:48.49: [  871]: --> [9:+FHNG:100]
Nov 08 16:04:48.49: [  871]: REMOTE HANGUP: Unspecified Phase D error (code 100)
Nov 08 16:04:48.49: [  871]: --> [2:OK]
Nov 08 16:04:48.49: [  871]: RECV FAX (00000462): recvq/fax00297.tif from , route to <unspecified>, 0 pages in 0:15
Nov 08 16:04:48.49: [  871]: RECV FAX: Unspecified Phase D error
Nov 08 16:04:48.49: [  871]: RECV FAX (00000462): session with  terminated abnormally: Unspecified Phase D error
Nov 08 16:04:48.49: [  871]: RECV FAX: bin/faxrcvd "recvq/fax00297.tif" "ttyS0" "00000462" "Unspecified Phase D error" "" ""
Nov 08 16:04:48.74: [  871]: RECV FAX: end
Nov 08 16:04:48.74: [  871]: SESSION END