HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] error message



Hi,
I`m getting this error when receiving a fax:

Nov 03 19:40:18.99: [16423]: SESSION BEGIN 00000017 xxxxxxxxx
Nov 03 19:40:18.99: [16423]: <-- [4:ATA\r]
Nov 03 19:40:19.53: [16423]: --> [3:FAX]
Nov 03 19:40:25.39: [16423]: --> [5:+FCON]
Nov 03 19:40:25.39: [16423]: ANSWER: FAX CONNECTION
Nov 03 19:40:25.39: [16423]: RECV FAX: begin
Nov 03 19:40:25.39: [16423]: RECV FAX: CDPN
Nov 03 19:43:25.39: [16423]: REMOTE HANGUP: Unspecified Receive Phase B
error (code 70)
Nov 03 19:43:25.39: [16423]: RECV FAX: Unspecified Receive Phase B error
Nov 03 19:43:25.39: [16423]: RECV FAX: end
Nov 03 19:43:25.39: [16423]: SESSION END

The Modem is a Creatix LC144VF. And the config file is:
CountryCode:            xxx
AreaCode:               xxx
FAXNumber:              xxx
LongDistancePrefix:     0
InternationalPrefix:    00
DialStringRules:        etc/dialrules
ServerTracing:          527
SessionTracing:         527
RecvFileMode:           0600
LogFileMode:            0600
DeviceMode:             0600
RingsBeforeAnswer:      2
SpeakerVolume:          off
GettyArgs:              "-h %l dx_%s"
LocalIdentifier:        "xxx"
TagLineFont:            etc/lutRS18.pcf
TagLineFormat:          "From %%l|%c|Page %%P of %%T"
MaxRecvPages:           25
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType:              Class2          # use class 2 interface
ModemRate:              9600
ModemFlowControl:       rtscts          # default
ModemWaitForConnect:    yes             # wait for CONNECT on answer
#
#ModemResetCmds:        AT&F2           # what you want for a Supra
ModemNoFlowCmd:         AT&K            # disable flow control cmd
ModemHardFlowCmd:       AT&K3           # hardware flow control cmd
ModemSoftFlowCmd:       AT&K4           # software flow control cmd
ModemSetupDTRCmd:       AT&D2           # DTR off causes modem to reset
ModemSetupDCDCmd:       AT&C1           # DCD follows carrier
ModemSetupAACmd:        AT+FCLASS=0;+FAA=1 # enable in class 0
#
ModemSendFillOrder:     LSB2MSB         # as expected
ModemRecvFillOrder:     MSB2LSB         # opposite of what makes sense
Class2RecvDataTrigger:  "\022"          # a la 2388-B

I`ve tried different setups but I can`t receive a fax.
Any help ???

Matz


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*




Project hosted by iFAX Solutions