HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] how to set calling party number ?



Well, I turned faxsend into a script that modifies the "FAXNumber" line 
in /var/spool/hylafax/etc/confix.ttyx0 per-call.

This sort of works, but the CID is apparently only transmitted within 
T.30, not on the ISDN level.
So I can see it at the receiver's end in the fax header
but I can NOT see it as the originator of my H.323 call
(which is what I really want - for accounting purposes).

So I'm not there yet. Thanks anyway,
Markus


Joey Officer wrote:
> Although I'm not sure if this applies to specifically what you are working
> with, look in /var/spool/hylafax/etc/confix.ttyS2 (where ttyS2 is my modem,
> yours will vary)  That is where the information is stored, I don't know if
> you could append that on the fly to contain the information you require.
> 
> Hope that points you in the right direction...
> 
> Joey
> 
> 
> -----Original Message-----
> From: hylafax-users-bounce@hylafax.org
> [mailto:hylafax-users-bounce@hylafax.org]On Behalf Of Markus Storm
> Sent: Monday, November 04, 2002 4:43 AM
> To: hylafax-users@hylafax.org
> Subject: [hylafax-users] how to set calling party number ?
> 
> 
> Hi all,
> 
> I am using Hylafax with a virtual modem (t38modem from OpenH323, to
> enable Fax over IP). Works great, in and out.
> 
> I'm using it as a mail2fax gateway and would like to set the CLID
> (calling line identity a.k.a. sender's number) on outbound calls .
> faxmail and sendfax -f use the sender's address to put it
> onto the cover sheet only, but they don't set the CLID.
> 
> Is there any (Class 1 fax modem) command to do that ?
> Any support for this from within Hylafax ?
> 
> Thanks,
> Markus
> 
> --
>   Markus Storm, mediaWays GmbH, Verl, Germany
>   storm @ mediaways.net
> 
> ____________________ HylaFAX(tm) Users Mailing List _______________________
>   To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
>   *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*
> 



____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*




Project hosted by iFAX Solutions