![]() |
I have several problems configuring the winmodem SupraMax 56i Voice PCI (US - SUP2260) with slackware 8.1. I installed the HCF drivers from http://www.mbsi.ca/cnxtlindrv/ The drivers seem to get installed, and I am able to use the cu command with the modem. Faxaddmodem is also able to talk to the modem. The problem starts when I start hylafax (hylafax start) with everything configured (including incoming services with t2:23:respawn:/usr/local/sbin/faxgetty /dev/ttySHCF0 in my initab) FaxGetty[201]: Unable to setup modem on /dev/ttySHCF0; giving up after 2 attempts is the one of the error messages in /var/log. I also get an email from the service telling me the modem is wedged. If I setup faxmodem with the correct parameter cu spits out for the class 1.0 modem, and try only outbound service using the sendfax command, it executes, but nothing happens. I cannot connect using ppp with the modem, so I do not know if the modem is even functional. I am about ready to give up on this modem, I have wasted entirely too much time trying to make it work. I would love some pointers on a new modem. I guess the question is, are there any sucess stories with this modem, or should I buy another, and which? I am runnin a 586 166mmx with 98mb of ram on slack 8.1 running 2.4.18. Please help! _________________________________________________________________ Get faster connections�-- switch to�MSN Internet Access! http://resourcecenter.msn.com/access/plans/default.asp ____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*