Re: [hylafax-users] DID Summary

[Sascha Herrmann <sascha.herrmann@gmx.de>]

Hy,

> hmm... I take it that DID over a few BRI lines (in europe) will be the same
> as long as the ISDN card supports it... ( I am thinking Sedlbauer range )
> ... and the telco (in my case Portugal Telecom aka Portugal Telecrap ) also
> send the right signals. Right?
every telco needs to send this signals (info about the called number) when
using an BRI line, since BRI is an bus and you need to address the called
device with its number (its an part of the EDSS1 protocol). So its only an
question of the Softwaredriver if the card is able to tell the called
number or not. The Sedlbauer driver is able to tell this number and i see
no reason why the Eicon BRI Driver shoudn't.

PS: is there really no telco in US supporting BRI lines? how ugly...

Bye
	Sascha


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*