[hylafax-users] Problem Receiving fax

["Nicolas Ross" <Nicolas.Ross@cybercat.ca>]

Our fax machine just gave up on receiving fax. We can still send out fax,
but not receive. So I decided to install Hylafax with a USR 14.4 isa
internal modem on a RedHat 7.2 box.

I used the rpm package...

The setup went ok, I had to comment out the line "ModemHardFlowCmd" in the
config.ttyS2 file for hylafax to be able to initialize the modem.

After that, faxgetty is able to attach to the modem and waits for calls.
When a fax comes in, I get :

Nov 01 16:30:46.71: [ 1464]: SESSION BEGIN 00000007 1nnnnnnnnnn
Nov 01 16:30:46.72: [ 1464]: HylaFAX (tm) Version 4.1.5
Nov 01 16:30:46.72: [ 1464]: DELAY 100 ms
Nov 01 16:30:46.82: [ 1464]: <-- [4:ATA\r]
Nov 01 16:30:52.46: [ 1464]: --> [7:CONNECT]
Nov 01 16:30:52.46: [ 1464]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS2'
Nov 01 16:30:52.46: [ 1464]: RECV FAX: begin
Nov 01 16:30:54.10: [ 1464]: --> [7:CONNECT]
Nov 01 16:30:54.91: [ 1464]: --> [2:OK]
Nov 01 16:30:54.91: [ 1464]: DELAY 100 ms
Nov 01 16:30:55.01: [ 1464]: <-- [9:AT+FRH=3\r]
Nov 01 16:30:55.12: [ 1464]: --> [7:CONNECT]
Nov 01 16:30:56.73: [ 1464]: --> [2:OK]
Nov 01 16:30:56.73: [ 1464]: REMOTE TSI "..."
Nov 01 16:30:56.73: [ 1464]: DELAY 100 ms
Nov 01 16:30:56.83: [ 1464]: <-- [9:AT+FRH=3\r]
Nov 01 16:30:56.88: [ 1464]: --> [7:CONNECT]
Nov 01 16:30:57.43: [ 1464]: --> [2:OK]
Nov 01 16:30:57.43: [ 1464]: REMOTE wants 14400 bit/s
Nov 01 16:30:57.43: [ 1464]: REMOTE wants page width 1728 pixels in 215 mm
Nov 01 16:30:57.43: [ 1464]: REMOTE wants unlimited page length
Nov 01 16:30:57.43: [ 1464]: REMOTE wants 7.7 line/mm
Nov 01 16:30:57.43: [ 1464]: REMOTE wants 1-D MR
Nov 01 16:30:57.43: [ 1464]: RECV training at v.17 14400 bit/s
Nov 01 16:30:57.43: [ 1464]: DELAY 100 ms
Nov 01 16:30:57.53: [ 1464]: <-- [11:AT+FRM=145\r]
Nov 01 16:30:59.25: [ 1464]: --> [7:CONNECT]
Nov 01 16:31:00.83: [ 1464]: RECV: TCF 2821 bytes, 4% non-zero, 2699
zero-run
Nov 01 16:31:00.83: [ 1464]: --> [10:NO CARRIER]
Nov 01 16:31:00.83: [ 1464]: DELAY 75 ms
Nov 01 16:31:00.91: [ 1464]: TRAINING succeeded
Nov 01 16:31:00.95: [ 1464]: DELAY 100 ms
Nov 01 16:31:01.06: [ 1464]: <-- [9:AT+FTH=3\r]
Nov 01 16:31:01.19: [ 1464]: --> [7:CONNECT]
Nov 01 16:31:02.38: [ 1464]: --> [2:OK]
Nov 01 16:31:02.38: [ 1464]: DELAY 100 ms
Nov 01 16:31:02.49: [ 1464]: <-- [11:AT+FRM=146\r]
Nov 01 16:31:09.50: [ 1464]: --> [2:OK]
Nov 01 16:31:09.50: [ 1464]: RECV FAX (00000007): recvq/fax00007.tif from
..., 0 pages in 0:17
Nov 01 16:31:09.57: [ 1464]: RECV FAX: T.30 T2 timeout, expected page not
received
Nov 01 16:31:09.57: [ 1464]: DELAY 100 ms
Nov 01 16:31:09.68: [ 1464]: <-- [9:AT+FTH=3\r]
Nov 01 16:31:09.79: [ 1464]: --> [7:CONNECT]
Nov 01 16:31:11.00: [ 1464]: --> [2:OK]
Nov 01 16:31:11.00: [ 1464]: RECV FAX (00000007): session with ... (port
terminated abnormally: T.30 T2 timeout, expected page not received
Nov 01 16:31:11.00: [ 1464]: RECV FAX: bin/faxrcvd "recvq/fax00007.tif"
"ttyS2" "00000007" "T.30 T2 timeout, expected page not received" "" ""

I get this for all the faxes that comes in...

Any hints ?



____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*