[hylafax-users] SHORT TIME NO ANSWER

[rot <nifo@omegasec.gr>]

I HAVE JUST  INSTALL HYLAFAX ON A SUSE 8 BOX USING A ZOOM DUALMODE 56K FAX 
MODEM

WHEN I TRY TO SEND A FAX TO ANY NUMBER I GET <NO ANSWER> IN A VERY SHORT TIME 
(ABOUT 5 SEC AS YOU CAN SEE BELOW) 

I CAN SEND FAX TO THE SAME NUMBER USING SENDFAX

THERE IS ANYTHING I CAN DO ?

THANK

FOTEAS NIKOS


Sep 17 18:00:48.49: [ 1750]: SESSION BEGIN 00000045 300100103233781
Sep 17 18:00:48.49: [ 1750]: HylaFAX (tm) Version 4.1
Sep 17 18:00:48.49: [ 1750]: SEND FAX: JOB 14 DEST 0103233781 COMMID 00000045
Sep 17 18:00:48.49: [ 1750]: DEVICE '/dev/modem'
Sep 17 18:00:48.49: [ 1750]: DELAY 75 ms
Sep 17 18:00:48.57: [ 1750]: DELAY 2600 ms
Sep 17 18:00:51.17: [ 1750]: <-- [6:ATZ\r]
Sep 17 18:00:52.44: [ 1750]: --> [2:OK]
Sep 17 18:00:52.44: [ 1750]: <-- [5:ATE0\r]
Sep 17 18:00:52.45: [ 1750]: --> [4:ATE0]
Sep 17 18:00:52.45: [ 1750]: --> [2:OK]
Sep 17 18:00:52.45: [ 1750]: <-- [5:ATV1\r]
Sep 17 18:00:52.46: [ 1750]: --> [2:OK]
Sep 17 18:00:52.46: [ 1750]: <-- [5:ATQ0\r]
Sep 17 18:00:52.47: [ 1750]: --> [2:OK]
Sep 17 18:00:52.47: [ 1750]: <-- [7:ATS0=0\r]
Sep 17 18:00:52.49: [ 1750]: --> [2:OK]
Sep 17 18:00:52.49: [ 1750]: <-- [7:ATS8=2\r]
Sep 17 18:00:52.51: [ 1750]: --> [2:OK]
Sep 17 18:00:52.51: [ 1750]: <-- [10:ATS7=6000\r]
Sep 17 18:00:52.53: [ 1750]: --> [2:OK]
Sep 17 18:00:52.53: [ 1750]: <-- [12:AT+FCLASS=2\r]
Sep 17 18:00:52.55: [ 1750]: --> [2:OK]
Sep 17 18:00:52.55: [ 1750]: <-- [10:AT+FTBC=0\r]
Sep 17 18:00:52.57: [ 1750]: --> [2:OK]
Sep 17 18:00:52.57: [ 1750]: <-- [10:AT+FBOR=0\r]
Sep 17 18:00:52.59: [ 1750]: --> [2:OK]
Sep 17 18:00:52.59: [ 1750]: <-- [13:AT+FPHCTO=30\r]
Sep 17 18:00:52.61: [ 1750]: --> [2:OK]
Sep 17 18:00:52.61: [ 1750]: <-- [24:AT+FDCC=1,5,0,2,0,0,0,0\r]
Sep 17 18:00:52.64: [ 1750]: --> [2:OK]
Sep 17 18:00:52.64: [ 1750]: <-- [5:ATM0\r]
Sep 17 18:00:52.65: [ 1750]: --> [2:OK]
Sep 17 18:00:52.65: [ 1750]: <-- [12:AT+FCLASS=2\r]
Sep 17 18:00:52.77: [ 1750]: --> [2:OK]
Sep 17 18:00:52.77: [ 1750]: <-- [10:AT+FTBC=0\r]
Sep 17 18:00:52.89: [ 1750]: --> [2:OK]
Sep 17 18:00:52.89: [ 1750]: <-- [10:AT+FBOR=0\r]
Sep 17 18:00:53.01: [ 1750]: --> [2:OK]
Sep 17 18:00:53.01: [ 1750]: <-- [13:AT+FPHCTO=30\r]
Sep 17 18:00:53.13: [ 1750]: --> [2:OK]
Sep 17 18:00:53.13: [ 1750]: <-- [24:AT+FDCC=1,5,0,2,0,0,0,0\r]
Sep 17 18:00:53.26: [ 1750]: --> [2:OK]
Sep 17 18:00:53.26: [ 1750]: <-- [23:AT+FLID="NothingSetup"\r]
Sep 17 18:00:53.38: [ 1750]: --> [2:OK]
Sep 17 18:00:53.39: [ 1750]: DIAL 0103233781
Sep 17 18:00:53.39: [ 1750]: <-- [17:ATDT90103233781@\r]
Sep 17 18:00:57.96: [ 1750]: --> [9:NO ANSWER]
Sep 17 18:00:57.96: [ 1750]: SEND FAILED: JOB 14 DEST 0103233781 ERR No answer 
from remote
Sep 17 18:00:57.96: [ 1750]: <-- [5:ATH0\r]
Sep 17 18:00:58.10: [ 1750]: --> [2:OK]
Sep 17 18:00:58.10: [ 1750]: SESSION END



____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*