HylaFAX The world's
most advanced open source fax server
|
|
[
Date Prev][
Date Next][
Thread Prev][
Thread Next]
[
Date Index]
[
Thread Index]
Re: [hylafax-users] Fw: Fw: Problem with state "waiting for modem to come ready" after sending a fax
I'm sorry, I'm novice !
I send you the log of the server that doesn't
work correctly:
ago 30 17:25:17 linux2wwp FaxQueuer[25961]: HylaFAX
(tm) Version 4.1.3
ago 30 17:25:17 linux2wwp FaxQueuer[25961]:
Copyright (c) 1990-1996 Sam Leffler
ago 30 17:25:17 linux2wwp FaxQueuer[25961]:
Copyright (c) 1991-1996 Silicon Graphics, Inc.
Aug 30 17:25:17 linux2wwp FaxGetty[25913]:
HELLO
Aug 30 17:25:17 linux2wwp HylaFAX[25966]: HylaFAX
INET Protocol Server: restarted.
ago 30 17:25:17 linux2wwp hylafax: Avvio hfaxd
succeeded
Aug 30 17:25:18 linux2wwp FaxGetty[25913]: CAUGHT
SIGNAL 15
Aug 30 17:25:18 linux2wwp FaxGetty[25913]: CLOSE
/dev/ttyS0
Aug 30 17:25:18 linux2wwp FaxGetty[25913]: <--
[5:ATH0\r]
Aug 30 17:25:18 linux2wwp FaxGetty[25913]: -->
[2:OK]
Aug 30 17:25:18 linux2wwp FaxGetty[25913]: MODEM
set DTR OFF
Aug 30 17:25:18 linux2wwp FaxGetty[25975]: OPEN
/dev/ttyS0 HylaFAX (tm) Version 4.1.3
Aug 30 17:25:18 linux2wwp FaxGetty[25975]: MODEM
set DTR OFF
Aug 30 17:25:18 linux2wwp FaxGetty[25975]: DELAY 75
ms
Aug 30 17:25:18 linux2wwp FaxGetty[25975]: MODEM
set DTR ON
Aug 30 17:25:18 linux2wwp FaxGetty[25975]: DELAY
2600 ms
ago 30 17:25:19 linux2wwp hylafax: Chiusura
faxgetty succeeded
Aug 30 17:25:20 linux2wwp FaxGetty[25975]: MODEM
set baud rate: 19200 baud, input flow XON/XOFF, output flow
XON/XOFF
Aug 30 17:25:20 linux2wwp FaxGetty[25975]: DELAY 10
ms
Aug 30 17:25:20 linux2wwp FaxGetty[25975]: MODEM
flush i/o
Aug 30 17:25:20 linux2wwp FaxGetty[25975]: <--
[4:ATZ\r]
Aug 30 17:25:21 linux2wwp FaxGetty[25975]: -->
[2:OK]
Aug 30 17:25:21 linux2wwp FaxGetty[25975]: DELAY
3000 ms
Aug 30 17:25:24 linux2wwp FaxGetty[25975]: <--
[5:ATE0\r]
Aug 30 17:25:24 linux2wwp FaxGetty[25975]: -->
[4:ATE0]
Aug 30 17:25:24 linux2wwp FaxGetty[25975]: -->
[2:OK]
Aug 30 17:25:24 linux2wwp FaxGetty[25975]: <--
[5:ATV1\r]
Aug 30 17:25:24 linux2wwp FaxGetty[25975]: -->
[2:OK]
Aug 30 17:25:24 linux2wwp FaxGetty[25975]: <--
[7:ATQ0X4\r]
Aug 30 17:25:24 linux2wwp FaxGetty[25975]: -->
[2:OK]
Aug 30 17:25:24 linux2wwp FaxGetty[25975]: <--
[7:ATS0=0\r]
Aug 30 17:25:25 linux2wwp FaxGetty[25975]: -->
[2:OK]
Aug 30 17:25:25 linux2wwp FaxGetty[25975]: <--
[7:ATS8=2\r]
Aug 30 17:25:25 linux2wwp FaxGetty[25975]: -->
[2:OK]
Aug 30 17:25:25 linux2wwp FaxGetty[25975]: <--
[8:ATS7=60\r]
Aug 30 17:25:25 linux2wwp FaxGetty[25975]: -->
[2:OK]
Aug 30 17:25:25 linux2wwp FaxGetty[25975]: <--
[12:AT&H2&I2&R1\r]
Aug 30 17:25:25 linux2wwp FaxGetty[25975]: -->
[2:OK]
Aug 30 17:25:25 linux2wwp FaxGetty[25975]: <--
[11:ATS13=1&D2\r]
Aug 30 17:25:26 linux2wwp FaxGetty[25975]: -->
[2:OK]
Aug 30 17:25:26 linux2wwp FaxGetty[25975]: <--
[6:AT&C1\r]
Aug 30 17:25:26 linux2wwp FaxGetty[25975]: -->
[2:OK]
Aug 30 17:25:26 linux2wwp FaxGetty[25975]: <--
[12:AT+FCLASS=?\r]
Aug 30 17:25:26 linux2wwp FaxGetty[25975]: -->
[7:0,1,2.0]
Aug 30 17:25:26 linux2wwp FaxGetty[25975]: -->
[2:OK]
Aug 30 17:25:26 linux2wwp FaxGetty[25975]: MODEM
Supports "Data"
Aug 30 17:25:26 linux2wwp FaxGetty[25975]: MODEM
Supports "Class 1"
Aug 30 17:25:26 linux2wwp FaxGetty[25975]: MODEM
Supports "Class 2.0"
Aug 30 17:25:26 linux2wwp FaxGetty[25975]: <--
[12:AT+FCLASS=1\r]
Aug 30 17:25:26 linux2wwp FaxGetty[25975]: -->
[2:OK]
Aug 30 17:25:26 linux2wwp FaxGetty[25975]: MODEM:
Mfr USR
Aug 30 17:25:26 linux2wwp FaxGetty[25975]: <--
[5:ATI3\r]
Aug 30 17:25:27 linux2wwp FaxGetty[25975]: -->
[48:U.S. Robotics Sportster Flash 56000 Rev. 10.3.80]
Aug 30 17:25:27 linux2wwp FaxGetty[25975]: -->
[2:OK]
Aug 30 17:25:27 linux2wwp FaxGetty[25975]: <--
[5:ATI7\r]
Aug 30 17:25:27 linux2wwp FaxGetty[25975]: -->
[24:Configuration Profile...]
Aug 30 17:25:27 linux2wwp FaxGetty[25975]: -->
[37:Product type Italy External]
Aug 30 17:25:27 linux2wwp FaxGetty[25975]: -->
[31:Product ID: xx166300]
Aug 30 17:25:27 linux2wwp FaxGetty[25975]: -->
[38:Options V32bis,V.34+,x2]
Aug 30 17:25:27 linux2wwp FaxGetty[25975]: -->
[40:Fax Options Class 1/Class 2.0]
Aug 30 17:25:27 linux2wwp FaxGetty[25975]: -->
[40:Voice Options Speakerphone, TAD]
Aug 30 17:25:27 linux2wwp FaxGetty[25975]: -->
[30:Clock Freq 92.0Mhz]
Aug 30 17:25:27 linux2wwp FaxGetty[25975]: -->
[27:EPROM 256k]
Aug 30 17:25:27 linux2wwp FaxGetty[25975]: -->
[26:RAM 32k]
Aug 30 17:25:27 linux2wwp FaxGetty[25975]: -->
[31:FLASH date 10/30/97]
Aug 30 17:25:27 linux2wwp FaxGetty[25975]: -->
[30:FLASH rev 10.3.80]
Aug 30 17:25:27 linux2wwp FaxGetty[25975]: -->
[31:DSP date 10/30/97]
Aug 30 17:25:27 linux2wwp FaxGetty[25975]: -->
[30:DSP rev 10.3.80]
Aug 30 17:25:27 linux2wwp FaxGetty[25975]: -->
[2:OK]
Aug 30 17:25:27 linux2wwp FaxGetty[25975]: MODEM:
Model U.S. Robotics Sportster Flash 56000 Rev. 10.3.80
Aug 30 17:25:27 linux2wwp FaxGetty[25975]: MODEM:
Revision Configuration Profile... Product type Italy External Product ID:
xx166300 Options V32bis,V.34+,x2 Fax Options Class 1/Class 2.0 Voice Options
Speakerphone, TAD Clock Freq 92.0Mhz EPROM 256k RAM 32k FLASH date 10/30/97
FLASH rev 10.3.80 DSP date 10/30/97 DSP rev 10.3.80
Aug 30 17:25:27 linux2wwp FaxGetty[25975]: <--
[9:AT+FTM=?\r]
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: -->
[41:3,24,48,72,73,74,96,97,98,121,122,145,146]
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: -->
[2:OK]
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: MODEM
Supports 3.85 line/mm
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: MODEM
Supports 7.7 line/mm
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: MODEM
Supports 2400 bit/s
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: MODEM
Supports 4800 bit/s
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: MODEM
Supports 7200 bit/s
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: MODEM
Supports 9600 bit/s
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: MODEM
Supports 12000 bit/s
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: MODEM
Supports 14400 bit/s
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: MODEM
Supports page width 1728 pixels in 215 mm
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: MODEM
Supports page width 2048 pixels in 255 mm
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: MODEM
Supports page width 2432 pixels in 303 mm
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: MODEM
Supports A4 page length (297 mm)
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: MODEM
Supports B4 page length (364 mm)
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: MODEM
Supports unlimited page length
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: MODEM
Supports 1-D MR
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: MODEM
Supports 2-D MR
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: MODEM
Supports 0 ms/scanline
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: MODEM
Supports 5 ms/scanline
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: MODEM
Supports 10 ms, 5 ms/scanline
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: MODEM
Supports 10 ms/scanline
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: MODEM
Supports 20 ms, 10 ms/scanline
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: MODEM
Supports 20 ms/scanline
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: MODEM
Supports 40 ms, 20 ms/scanline
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: MODEM
Supports 40 ms/scanline
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: <--
[9:AT+FRM=?\r]
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: -->
[41:3,24,48,72,73,74,96,97,98,121,122,145,146]
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: -->
[2:OK]
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: <--
[12:AT+FCLASS=1\r]
Aug 30 17:25:29 linux2wwp FaxGetty[25975]: -->
[2:OK]
Aug 30 17:25:29 linux2wwp FaxGetty[25975]: <--
[12:AT+FCLASS=0\r]
Aug 30 17:25:29 linux2wwp FaxGetty[25975]: -->
[2:OK]
Aug 30 17:25:29 linux2wwp FaxGetty[25975]: MODEM
USR U.S. Robotics Sportster Flash 56000 Rev. 10.3.80/Configuration Profile...
Product type Italy External Product ID: xx166300 Options V32bis,V.34+,x2 Fax
Options Class 1/Class 2.0 Voice Options Speakerphone, TAD Clock Freq 92.0Mhz
EPROM 256k RAM 32k FLASH date 10/30/97 FLASH rev 10.3.80 DSP date 10/30/97 DSP
rev 10.3.80
Aug 30 17:25:29 linux2wwp FaxGetty[25975]: <--
[7:ATL3M1\r]
Aug 30 17:25:29 linux2wwp FaxGetty[25975]: -->
[2:OK]
Aug 30 17:25:29 linux2wwp FaxGetty[25975]: STATE
CHANGE: BASE -> RUNNING
Aug 30 17:25:29 linux2wwp FaxGetty[25975]: MODEM
input buffering disabled
ago 30 17:25:46 linux2wwp FaxQueuer[25961]: SUBMIT
JOB 11
ago 30 17:25:48 linux2wwp FaxSend[25988]: MODEM set
DTR OFF
ago 30 17:25:48 linux2wwp FaxSend[25988]: DELAY 75
ms
ago 30 17:25:48 linux2wwp FaxSend[25988]: MODEM set
DTR ON
ago 30 17:25:48 linux2wwp FaxSend[25988]: DELAY
2600 ms
ago 30 17:25:50 linux2wwp FaxSend[25988]: MODEM set
baud rate: 19200 baud, input flow XON/XOFF, output flow XON/XOFF
ago 30 17:25:50 linux2wwp FaxSend[25988]: DELAY 10
ms
ago 30 17:25:50 linux2wwp FaxSend[25988]: MODEM
flush i/o
ago 30 17:25:50 linux2wwp FaxSend[25988]: <--
[4:ATZ\r]
ago 30 17:25:50 linux2wwp FaxSend[25988]: -->
[2:OK]
ago 30 17:25:50 linux2wwp FaxSend[25988]: DELAY
3000 ms
ago 30 17:25:53 linux2wwp FaxSend[25988]: <--
[5:ATE0\r]
ago 30 17:25:54 linux2wwp FaxSend[25988]: -->
[4:ATE0]
ago 30 17:25:54 linux2wwp FaxSend[25988]: -->
[2:OK]
ago 30 17:25:54 linux2wwp FaxSend[25988]: <--
[5:ATV1\r]
ago 30 17:25:54 linux2wwp FaxSend[25988]: -->
[2:OK]
ago 30 17:25:54 linux2wwp FaxSend[25988]: <--
[7:ATQ0X4\r]
ago 30 17:25:54 linux2wwp FaxSend[25988]: -->
[2:OK]
ago 30 17:25:54 linux2wwp FaxSend[25988]: <--
[7:ATS0=0\r]
ago 30 17:25:54 linux2wwp FaxSend[25988]: -->
[2:OK]
ago 30 17:25:54 linux2wwp FaxSend[25988]: <--
[7:ATS8=2\r]
ago 30 17:25:55 linux2wwp FaxSend[25988]: -->
[2:OK]
ago 30 17:25:55 linux2wwp FaxSend[25988]: <--
[8:ATS7=60\r]
ago 30 17:25:55 linux2wwp FaxSend[25988]: -->
[2:OK]
ago 30 17:25:55 linux2wwp FaxSend[25988]: <--
[12:AT&H2&I2&R1\r]
ago 30 17:25:55 linux2wwp FaxSend[25988]: -->
[2:OK]
ago 30 17:25:55 linux2wwp FaxSend[25988]: <--
[11:ATS13=1&D2\r]
ago 30 17:25:55 linux2wwp FaxSend[25988]: -->
[2:OK]
ago 30 17:25:55 linux2wwp FaxSend[25988]: <--
[6:AT&C1\r]
ago 30 17:25:56 linux2wwp FaxSend[25988]: -->
[2:OK]
ago 30 17:25:56 linux2wwp FaxSend[25988]: <--
[12:AT+FCLASS=?\r]
ago 30 17:25:56 linux2wwp FaxSend[25988]: -->
[7:0,1,2.0]
ago 30 17:25:56 linux2wwp FaxSend[25988]: -->
[2:OK]
ago 30 17:25:56 linux2wwp FaxSend[25988]: MODEM
Supports "Data"
ago 30 17:25:56 linux2wwp FaxSend[25988]: MODEM
Supports "Class 1"
ago 30 17:25:56 linux2wwp FaxSend[25988]: MODEM
Supports "Class 2.0"
ago 30 17:25:56 linux2wwp FaxSend[25988]: <--
[12:AT+FCLASS=1\r]
ago 30 17:25:56 linux2wwp FaxSend[25988]: -->
[2:OK]
ago 30 17:25:56 linux2wwp FaxSend[25988]: MODEM:
Mfr USR
ago 30 17:25:56 linux2wwp FaxSend[25988]: <--
[5:ATI3\r]
ago 30 17:25:56 linux2wwp FaxSend[25988]: -->
[48:U.S. Robotics Sportster Flash 56000 Rev. 10.3.80]
ago 30 17:25:56 linux2wwp FaxSend[25988]: -->
[2:OK]
ago 30 17:25:56 linux2wwp FaxSend[25988]: <--
[5:ATI7\r]
ago 30 17:25:57 linux2wwp FaxSend[25988]: -->
[24:Configuration Profile...]
ago 30 17:25:57 linux2wwp FaxSend[25988]: -->
[37:Product type Italy External]
ago 30 17:25:57 linux2wwp FaxSend[25988]: -->
[31:Product ID: xx166300]
ago 30 17:25:57 linux2wwp FaxSend[25988]: -->
[38:Options V32bis,V.34+,x2]
ago 30 17:25:57 linux2wwp FaxSend[25988]: -->
[40:Fax Options Class 1/Class 2.0]
ago 30 17:25:57 linux2wwp FaxSend[25988]: -->
[40:Voice Options Speakerphone, TAD]
ago 30 17:25:57 linux2wwp FaxSend[25988]: -->
[30:Clock Freq 92.0Mhz]
ago 30 17:25:57 linux2wwp FaxSend[25988]: -->
[27:EPROM 256k]
ago 30 17:25:57 linux2wwp FaxSend[25988]: -->
[26:RAM 32k]
ago 30 17:25:57 linux2wwp FaxSend[25988]: -->
[31:FLASH date 10/30/97]
ago 30 17:25:57 linux2wwp FaxSend[25988]: -->
[30:FLASH rev 10.3.80]
ago 30 17:25:57 linux2wwp FaxSend[25988]: -->
[31:DSP date 10/30/97]
ago 30 17:25:57 linux2wwp FaxSend[25988]: -->
[30:DSP rev 10.3.80]
ago 30 17:25:57 linux2wwp FaxSend[25988]: -->
[2:OK]
ago 30 17:25:57 linux2wwp FaxSend[25988]: MODEM:
Model U.S. Robotics Sportster Flash 56000 Rev. 10.3.80
ago 30 17:25:57 linux2wwp FaxSend[25988]: MODEM:
Revision Configuration Profile... Product type Italy External Product ID:
xx166300 Options V32bis,V.34+,x2 Fax Options Class 1/Class 2.0 Voice Options
Speakerphone, TAD Clock Freq 92.0Mhz EPROM 256k RAM 32k FLASH date 10/30/97
FLASH rev 10.3.80 DSP date 10/30/97 DSP rev 10.3.80
ago 30 17:25:57 linux2wwp FaxSend[25988]: <--
[9:AT+FTM=?\r]
ago 30 17:25:57 linux2wwp FaxSend[25988]: -->
[41:3,24,48,72,73,74,96,97,98,121,122,145,146]
ago 30 17:25:57 linux2wwp FaxSend[25988]: -->
[2:OK]
ago 30 17:25:57 linux2wwp FaxSend[25988]: MODEM
Supports 3.85 line/mm
ago 30 17:25:57 linux2wwp FaxSend[25988]: MODEM
Supports 7.7 line/mm
ago 30 17:25:57 linux2wwp FaxSend[25988]: MODEM
Supports 2400 bit/s
ago 30 17:25:57 linux2wwp FaxSend[25988]: MODEM
Supports 4800 bit/s
ago 30 17:25:57 linux2wwp FaxSend[25988]: MODEM
Supports 7200 bit/s
ago 30 17:25:57 linux2wwp FaxSend[25988]: MODEM
Supports 9600 bit/s
ago 30 17:25:57 linux2wwp FaxSend[25988]: MODEM
Supports 12000 bit/s
ago 30 17:25:57 linux2wwp FaxSend[25988]: MODEM
Supports 14400 bit/s
ago 30 17:25:57 linux2wwp FaxSend[25988]: MODEM
Supports page width 1728 pixels in 215 mm
ago 30 17:25:57 linux2wwp FaxSend[25988]: MODEM
Supports page width 2048 pixels in 255 mm
ago 30 17:25:57 linux2wwp FaxSend[25988]: MODEM
Supports page width 2432 pixels in 303 mm
ago 30 17:25:57 linux2wwp FaxSend[25988]: MODEM
Supports A4 page length (297 mm)
ago 30 17:25:57 linux2wwp FaxSend[25988]: MODEM
Supports B4 page length (364 mm)
ago 30 17:25:57 linux2wwp FaxSend[25988]: MODEM
Supports unlimited page length
ago 30 17:25:57 linux2wwp FaxSend[25988]: MODEM
Supports 1-D MR
ago 30 17:25:57 linux2wwp FaxSend[25988]: MODEM
Supports 2-D MR
ago 30 17:25:57 linux2wwp FaxSend[25988]: MODEM
Supports 0 ms/scanline
ago 30 17:25:58 linux2wwp FaxSend[25988]: MODEM
Supports 5 ms/scanline
ago 30 17:25:58 linux2wwp FaxSend[25988]: MODEM
Supports 10 ms, 5 ms/scanline
ago 30 17:25:58 linux2wwp FaxSend[25988]: MODEM
Supports 10 ms/scanline
ago 30 17:25:58 linux2wwp FaxSend[25988]: MODEM
Supports 20 ms, 10 ms/scanline
ago 30 17:25:58 linux2wwp FaxSend[25988]: MODEM
Supports 20 ms/scanline
ago 30 17:25:58 linux2wwp FaxSend[25988]: MODEM
Supports 40 ms, 20 ms/scanline
ago 30 17:25:58 linux2wwp FaxSend[25988]: MODEM
Supports 40 ms/scanline
ago 30 17:25:58 linux2wwp FaxSend[25988]: <--
[9:AT+FRM=?\r]
ago 30 17:25:58 linux2wwp FaxSend[25988]: -->
[41:3,24,48,72,73,74,96,97,98,121,122,145,146]
ago 30 17:25:58 linux2wwp FaxSend[25988]: -->
[2:OK]
ago 30 17:25:58 linux2wwp FaxSend[25988]: <--
[12:AT+FCLASS=1\r]
ago 30 17:25:58 linux2wwp FaxSend[25988]: -->
[2:OK]
ago 30 17:25:58 linux2wwp FaxSend[25988]: <--
[12:AT+FCLASS=0\r]
ago 30 17:25:59 linux2wwp FaxSend[25988]: -->
[2:OK]
ago 30 17:25:59 linux2wwp FaxSend[25988]: MODEM USR
U.S. Robotics Sportster Flash 56000 Rev. 10.3.80/Configuration Profile...
Product type Italy External Product ID: xx166300 Options V32bis,V.34+,x2 Fax
Options Class 1/Class 2.0 Voice Options Speakerphone, TAD Clock Freq 92.0Mhz
EPROM 256k RAM 32k FLASH date 10/30/97 FLASH rev 10.3.80 DSP date 10/30/97 DSP
rev 10.3.80
ago 30 17:25:59 linux2wwp FaxSend[25988]: <--
[7:ATL3M1\r]
ago 30 17:25:59 linux2wwp FaxSend[25988]: -->
[2:OK]
ago 30 17:25:59 linux2wwp FaxSend[25988]: STATE
CHANGE: BASE -> RUNNING
ago 30 17:25:59 linux2wwp FaxSend[25988]: MODEM
input buffering disabled
ago 30 17:25:59 linux2wwp FaxSend[25988]: SEND FAX:
JOB 11 DEST 056424997 COMMID 00000011 DEVICE '/dev/ttyS0'
ago 30 17:26:40 linux2wwp FaxSend[25988]: SEND FAX:
JOB 11 SENT in 0:14
Aug 30 17:27:29 linux2wwp
FaxGetty[25975]: CAUGHT SIGNAL 15
Aug 30 17:27:29 linux2wwp FaxGetty[25975]: CLOSE
/dev/ttyS0
Aug 30 17:27:29 linux2wwp FaxGetty[25975]: <--
[5:ATH0\r]
Aug 30 17:27:34 linux2wwp FaxGetty[25975]: MODEM
TIMEOUT: reading line from modem
Aug 30 17:27:34 linux2wwp FaxGetty[25975]: MODEM
<Timeout>
Aug 30 17:27:34 linux2wwp FaxGetty[25975]: MODEM
set DTR OFF
Aug 30 17:27:34 linux2wwp FaxGetty[26049]: OPEN
/dev/ttyS0 HylaFAX (tm) Version 4.1.3
Aug 30 17:27:34 linux2wwp FaxGetty[26049]: MODEM
set DTR OFF
Aug 30 17:27:34 linux2wwp FaxGetty[26049]: DELAY 75
ms
Aug 30 17:27:34 linux2wwp FaxGetty[26049]: MODEM
set DTR ON
Aug 30 17:27:34 linux2wwp FaxGetty[26049]: DELAY
2600 ms
Aug 30 17:27:36 linux2wwp FaxGetty[26049]: MODEM
set baud rate: 19200 baud, input flow XON/XOFF, output flow
XON/XOFF
Aug 30 17:27:36 linux2wwp FaxGetty[26049]: DELAY 10
ms
Aug 30 17:27:36 linux2wwp FaxGetty[26049]: MODEM
flush i/o
Aug 30 17:27:36 linux2wwp FaxGetty[26049]: <--
[4:ATZ\r]
Aug 30 17:27:37 linux2wwp FaxGetty[26049]: -->
[2:OK]
Aug 30 17:27:37 linux2wwp FaxGetty[26049]: DELAY
3000 ms
Aug 30 17:27:40 linux2wwp FaxGetty[26049]: <--
[5:ATE0\r]
Aug 30 17:27:40 linux2wwp FaxGetty[26049]: -->
[4:ATE0]
Aug 30 17:27:40 linux2wwp FaxGetty[26049]: -->
[2:OK]
Aug 30 17:27:40 linux2wwp FaxGetty[26049]: <--
[5:ATV1\r]
Aug 30 17:27:40 linux2wwp FaxGetty[26049]: -->
[2:OK]
Aug 30 17:27:40 linux2wwp FaxGetty[26049]: <--
[7:ATQ0X4\r]
Aug 30 17:27:40 linux2wwp FaxGetty[26049]: -->
[2:OK]
Aug 30 17:27:40 linux2wwp FaxGetty[26049]: <--
[7:ATS0=0\r]
Aug 30 17:27:41 linux2wwp FaxGetty[26049]: -->
[2:OK]
Aug 30 17:27:41 linux2wwp FaxGetty[26049]: <--
[7:ATS8=2\r]
Aug 30 17:27:41 linux2wwp FaxGetty[26049]: -->
[2:OK]
Aug 30 17:27:41 linux2wwp FaxGetty[26049]: <--
[8:ATS7=60\r]
Aug 30 17:27:41 linux2wwp FaxGetty[26049]: -->
[2:OK]
Aug 30 17:27:41 linux2wwp FaxGetty[26049]: <--
[12:AT&H2&I2&R1\r]
Aug 30 17:27:41 linux2wwp FaxGetty[26049]: -->
[2:OK]
Aug 30 17:27:41 linux2wwp FaxGetty[26049]: <--
[11:ATS13=1&D2\r]
Aug 30 17:27:41 linux2wwp FaxGetty[26049]: -->
[2:OK]
Aug 30 17:27:41 linux2wwp FaxGetty[26049]: <--
[6:AT&C1\r]
Aug 30 17:27:42 linux2wwp FaxGetty[26049]: -->
[2:OK]
Aug 30 17:27:42 linux2wwp FaxGetty[26049]: <--
[12:AT+FCLASS=?\r]
Aug 30 17:27:42 linux2wwp FaxGetty[26049]: -->
[7:0,1,2.0]
Aug 30 17:27:42 linux2wwp FaxGetty[26049]: -->
[2:OK]
Aug 30 17:27:42 linux2wwp FaxGetty[26049]: MODEM
Supports "Data"
Aug 30 17:27:42 linux2wwp FaxGetty[26049]: MODEM
Supports "Class 1"
Aug 30 17:27:42 linux2wwp FaxGetty[26049]: MODEM
Supports "Class 2.0"
Aug 30 17:27:42 linux2wwp FaxGetty[26049]: <--
[12:AT+FCLASS=1\r]
Aug 30 17:27:42 linux2wwp FaxGetty[26049]: -->
[2:OK]
Aug 30 17:27:42 linux2wwp FaxGetty[26049]: MODEM:
Mfr USR
Aug 30 17:27:42 linux2wwp FaxGetty[26049]: <--
[5:ATI3\r]
Aug 30 17:27:42 linux2wwp FaxGetty[26049]: -->
[48:U.S. Robotics Sportster Flash 56000 Rev. 10.3.80]
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: -->
[2:OK]
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: <--
[5:ATI7\r]
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: -->
[24:Configuration Profile...]
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: -->
[37:Product type Italy External]
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: -->
[31:Product ID: xx166300]
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: -->
[38:Options V32bis,V.34+,x2]
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: -->
[40:Fax Options Class 1/Class 2.0]
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: -->
[40:Voice Options Speakerphone, TAD]
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: -->
[30:Clock Freq 92.0Mhz]
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: -->
[27:EPROM 256k]
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: -->
[26:RAM 32k]
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: -->
[31:FLASH date 10/30/97]
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: -->
[30:FLASH rev 10.3.80]
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: -->
[31:DSP date 10/30/97]
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: -->
[30:DSP rev 10.3.80]
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: -->
[2:OK]
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: MODEM:
Model U.S. Robotics Sportster Flash 56000 Rev. 10.3.80
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: MODEM:
Revision Configuration Profile... Product type Italy External Product ID:
xx166300 Options V32bis,V.34+,x2 Fax Options Class 1/Class 2.0 Voice Options
Speakerphone, TAD Clock Freq 92.0Mhz EPROM 256k RAM 32k FLASH date 10/30/97
FLASH rev 10.3.80 DSP date 10/30/97 DSP rev 10.3.80
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: <--
[9:AT+FTM=?\r]
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: -->
[41:3,24,48,72,73,74,96,97,98,121,122,145,146]
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: -->
[2:OK]
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: MODEM
Supports 3.85 line/mm
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: MODEM
Supports 7.7 line/mm
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: MODEM
Supports 2400 bit/s
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: MODEM
Supports 4800 bit/s
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: MODEM
Supports 7200 bit/s
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: MODEM
Supports 9600 bit/s
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: MODEM
Supports 12000 bit/s
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: MODEM
Supports 14400 bit/s
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: MODEM
Supports page width 1728 pixels in 215 mm
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: MODEM
Supports page width 2048 pixels in 255 mm
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: MODEM
Supports page width 2432 pixels in 303 mm
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: MODEM
Supports A4 page length (297 mm)
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: MODEM
Supports B4 page length (364 mm)
Aug 30 17:27:44 linux2wwp FaxGetty[26049]: MODEM
Supports unlimited page length
Aug 30 17:27:44 linux2wwp FaxGetty[26049]: MODEM
Supports 1-D MR
Aug 30 17:27:44 linux2wwp FaxGetty[26049]: MODEM
Supports 2-D MR
Aug 30 17:27:44 linux2wwp FaxGetty[26049]: MODEM
Supports 0 ms/scanline
Aug 30 17:27:44 linux2wwp FaxGetty[26049]: MODEM
Supports 5 ms/scanline
Aug 30 17:27:44 linux2wwp FaxGetty[26049]: MODEM
Supports 10 ms, 5 ms/scanline
Aug 30 17:27:44 linux2wwp FaxGetty[26049]: MODEM
Supports 10 ms/scanline
Aug 30 17:27:44 linux2wwp FaxGetty[26049]: MODEM
Supports 20 ms, 10 ms/scanline
Aug 30 17:27:44 linux2wwp FaxGetty[26049]: MODEM
Supports 20 ms/scanline
Aug 30 17:27:44 linux2wwp FaxGetty[26049]: MODEM
Supports 40 ms, 20 ms/scanline
Aug 30 17:27:44 linux2wwp FaxGetty[26049]: MODEM
Supports 40 ms/scanline
Aug 30 17:27:44 linux2wwp FaxGetty[26049]: <--
[9:AT+FRM=?\r]
Aug 30 17:27:44 linux2wwp FaxGetty[26049]: -->
[41:3,24,48,72,73,74,96,97,98,121,122,145,146]
Aug 30 17:27:44 linux2wwp FaxGetty[26049]: -->
[2:OK]
Aug 30 17:27:44 linux2wwp FaxGetty[26049]: <--
[12:AT+FCLASS=1\r]
Aug 30 17:27:44 linux2wwp FaxGetty[26049]: -->
[2:OK]
Aug 30 17:27:44 linux2wwp FaxGetty[26049]: <--
[12:AT+FCLASS=0\r]
Aug 30 17:27:45 linux2wwp FaxGetty[26049]: -->
[2:OK]
Aug 30 17:27:45 linux2wwp FaxGetty[26049]: MODEM
USR U.S. Robotics Sportster Flash 56000 Rev. 10.3.80/Configuration Profile...
Product type Italy External Product ID: xx166300 Options V32bis,V.34+,x2 Fax
Options Class 1/Class 2.0 Voice Options Speakerphone, TAD Clock Freq 92.0Mhz
EPROM 256k RAM 32k FLASH date 10/30/97 FLASH rev 10.3.80 DSP date 10/30/97 DSP
rev 10.3.80
Aug 30 17:27:45 linux2wwp FaxGetty[26049]: <--
[7:ATL3M1\r]
Aug 30 17:27:45 linux2wwp FaxGetty[26049]: -->
[2:OK]
Aug 30 17:27:45 linux2wwp FaxGetty[26049]: STATE
CHANGE: BASE -> RUNNING
Aug 30 17:27:45 linux2wwp FaxGetty[26049]: MODEM
input buffering disabled
I didn't send you the FaxGetty log entries
after a FaxSend because there wasn't nothing else after the line "ago 30
17:26:40 linux2wwp FaxSend[25988]: SEND FAX: JOB 11 SENT in 0:14".
In this log you can see that I have killed FaxGetty
process after the FaxSend, this is the olny method to re-initialize
modem
Sorry for my bad english.
If needed I attach my config.ttyS0
# $Id: usr-xon,v 1.6 2002/04/07 20:29:27 darren Exp $
#
# HylaFAX Facsimile Software
#
# Copyright (c) 1990-1996 Sam Leffler
# Copyright (c) 1991-1996 Silicon Graphics, Inc.
# HylaFAX is a trademark of Silicon Graphics, Inc.
#
# Permission to use, copy, modify, distribute, and sell this software and
# its documentation for any purpose is hereby granted without fee,
provided
# that (i) the above copyright notices and this permission notice appear
in
# all copies of the software and related documentation, and (ii) the names
of
# Sam Leffler and Silicon Graphics may not be used in any advertising
or
# publicity relating to the software without the specific, prior
written
# permission of Sam Leffler and Silicon Graphics.
#
# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND,
# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY
# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
#
# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR
# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY
KIND,
# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
PROFITS,
# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF
# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
# OF THIS SOFTWARE.
#
#
# Configuration for using the Class 1 command interface with
# a USR Courier or Sportster modem and XON/XOFF flow control.
#
#
CountryCode: 39
AreaCode: 0564
FAXNumber: +39.564.24997
LongDistancePrefix: 00
InternationalPrefix: 00
DialStringRules: etc/dialrules
ServerTracing: 0xFFF
SessionTracing: 11
RecvFileMode: 0600
LogFileMode: 0600
DeviceMode: 0600
RingsBeforeAnswer: 1
SpeakerVolume: high
GettyArgs: "-h %l dx_%s"
LocalIdentifier: "NothingSetup"
TagLineFont: etc/lutRS18.pcf
TagLineFormat: "From %%l|%c|Page %%P of %%T"
MaxRecvPages: 25
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType: Class1 # use class 1 interface
ModemRate: 19200 # rate for DCE-DTE communication
ModemFlowControl: xonxoff # hardware flow control
#
ModemSetupDTRCmd: ATS13=1&D2 # setup so DTR drop resets modem
ModemSetupDCDCmd: AT&C1 # setup so DCD reflects carrier (or not)
ModemNoFlowCmd: AT&H0&I0&R1 # setup modem for no flow
control
ModemHardFlowCmd: AT&H1&I0&R2 # setup modem for hardware flow
control
ModemSoftFlowCmd: AT&H2&I2&R1 # setup modem for software flow
control
ModemResultCodesCmd: ATQ0X4 # enable result codes
#
ModemMfrQueryCmd: !USR
ModemModelQueryCmd: ATI3
ModemRevQueryCmd: ATI7 # XXX returns a multi-line result
ModemBaudRateDelay: 10
#
# When AT+FCLASS=1 is issued the modem automatically switches
# to software flow control; these parameters let the fax software
# reset flow control as needed after entering Class 1.
#
Class1NFLOCmd: AT&H0&I0&R1 # setup modem for no flow
control
Class1HFLOCmd: AT&H1&I0&R2 # setup modem for hardware flow
control
Class1SFLOCmd: "" # modem does this automatically
#
# The remainder of this configuration is included so that the
# modem "idles" in Class 0 while not sending or receiving facsimile.
#
ModemSetupAACmd: AT+FCLASS=0 # leave modem idling in class 0
ModemAnswerCmd: AT+FCLASS=1A # answer in Class 1
#
# Disables the reporting of bad frames by the modem. This
# overcomes a firmware problem in the x2 and V90 Sportsters.
# It is not necessary for the Courier modem.
#
Class2NRCmd: AT+FNR=1,1,1,0
Thank you very much
Nico
----- Original Message -----
Sent: Friday, August 30, 2002 4:14 PM
Subject: Re: [hylafax-users] Fw: Fw: Problem with
state "waiting for modem to come ready" after sending a fax
> On 2002.08.30 02:49 nico@gruppoerrepi.it wrote:
>
> > It was two days I try to resolve this matter but I can't.
>
> My proble is the same I've read in other messages: after sending
fax
> > faxgetty don't re-initialize the modem and I can't receive fax
until I
> > kill faxgetty (so init re-run it).
>
> Ahem...
as always... set ServerTracing to 0xFFF and please send the
> FaxGetty
log entries after a FaxSend.
>
> Lee.
>
>
____________________ HylaFAX(tm) Users Mailing List
_______________________
> To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi> On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org <
/dev/null
> *To learn about commercial HylaFAX(tm) support, mail
sales@hylafax.org.*
>
>