Re: [hylafax-users] Fw: Problem with state "waiting for modem to come ready" after sending a fax

[<nico@gruppoerrepi.it>]

Thank you for your answere,
I have just tried to substitute modem, actually I am using an US. Robotics
56K Faxmodem that perfectly works on another server.

Nico.


----- Original Message -----
From: "Brian" <brian@english-bay.com>
To: <hylafax-users@hylafax.org>
Sent: Friday, August 30, 2002 10:55 AM
Subject: Re: [hylafax-users] Fw: Problem with state "waiting for modem to
come ready" after sending a fax


> Perhaps you should swap the modems to see if the problem is hardware.
>
> I have had great success with HylaFAX using an external modem. I bought a
> used Intel 14.4 SatisFAXtion on eBay and it performs perfectly.
>
> You could post the appropriate log entries so we can see what is
happening.
>
> Best regards.
>
> Brian
>
> ----- Original Message -----
> From: <nico@gruppoerrepi.it>
> To: <hylafax-users@hylafax.org>
> Sent: Friday, August 30, 2002 1:13 AM
> Subject: [hylafax-users] Fw: Problem with state "waiting for modem to come
> ready" after sending a fax
>
>
> I'm sorry for my insistence but I really need help. I spent many beautiful
> words for hylafax here in my company, and when I have installed it in a
> production server it  don't works.
>
> Thank you for your help.
>
>
> ----- Original Message -----
> From: nico@gruppoerrepi.it
> To: hylafax-users@hylafax.org
> Sent: Thursday, August 29, 2002 5:33 PM
> Subject: Problem with state "waiting for modem to come ready" after
sending
> a fax
>
>
> It was two days I try to resolve this matter but I can't.
> My proble is the same I've read in other messages: after sending fax
> faxgetty don't re-initialize the modem and I can't receive fax until I
kill
> faxgetty (so init re-run it).
>
> Then I've installed Redhat Linux 7.3 whith hylafax 4.1.3 rpm's in 2
> different servers with the same US Robotics 56K faxmodem: an IBM netfinity
> 3000 and an IBM PC 300GL. The funny is that with the same software
> installation and the same config.ttySx files the PC 300GL works fine while
> the netfinity 3000 have the "faxgetty" problem I've just written.
>
> I've tried to set the parameter ModemBaudRateDelay to 10 and 1000 but
> nothing change.
>
> I've not applied the "ModemBaudRateDelay" patch because and I don't know
how
> to apply it to the rpm's file that I've installed.
>
> I'm deprived of hope, if I can't resolve the problem i think i kill
myself.
>
> Thanks Nico
>
>
>
> ____________________ HylaFAX(tm) Users Mailing List
_______________________
>   To subscribe/unsubscribe, click
http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org <
/dev/null
>   *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*
>
>


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*