HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] unspecified transmit error phase b code 20



Figure out why your client is sending foobarred Postscript.  I.e., with 
WHFC make sure you're using the Apple Laserwriter driver to make the 
Postscript file.

Lee.


On 2002.06.28 13:31 Tim Price wrote:
> Works like a charm.  Now what?....
> 
> 
> -----Original Message-----
> From: Lee Howard [mailto:faxguy@howardsilvan.com]
> Sent: Friday, June 28, 2002 2:42 PM
> To: tprice@lovebox.com
> Cc: hylafax-users@hylafax.org
> Subject: Re: [hylafax-users] unspecified transmit error phase b code 20
> 
> 
> On 2002.06.28 12:26 Tim Price wrote:
> 
> > Jun 27 16:19:37.80: [ 3472]: USE 0 ms/scanline
> > Jun 27 16:19:37.80: [ 3472]: <-- [5:ATH0\r]
> > Jun 27 16:19:38.07: [ 3472]: --> [9:+FHNG: 20]
> > Jun 27 16:19:38.07: [ 3472]: REMOTE HANGUP: Unspecified Transmit Phase
> B
> > error
> > (code 20)
> > Jun 27 16:19:39.55: [ 3472]: --> [2:OK]
> > Jun 27 16:19:39.55: [ 3472]: SESSION END
> 
> This is usually an indication that ps2fax imaged encountered (but did not
> 
> fail) some bad postscript image file.
> 
> Try 'sendfax -d some_number /etc/hosts' and see how it goes.
> 
> Lee.
> 

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null




Project hosted by iFAX Solutions