[hylafax-users] waiting for second page

[Michael Berg <michael@famberg.net>]

Hi
Im an happy hylafax user, now I have get problems with some hardware
faxes. 
This faxes move in the faxes and If no more faxes are moved in, then the
fax hangup. 
And now the problem for my hylafaxserver. He receive from the remotefax
a MBS(more pages follow) signal, because the remotefax fill take care
the connection. 
But the user on the remotefax isnot sending any more faxes. After an few
time my faxserver is getting an timeout error and deleting the received
pages.
Here the logfile:

Jun 21 17:29:08.78: [  432]: SESSION BEGIN 00000124 493438153970
Jun 21 17:29:08.80: [  432]: <-- [4:ATA\r]
Jun 21 17:29:10.50: [  432]: --> [3:FAX]
Jun 21 17:29:10.50: [  432]: ANSWER: FAX CONNECTION
Jun 21 17:29:10.50: [  432]: MODEM input buffering enabled
Jun 21 17:29:10.50: [  432]: RECV FAX: begin
Jun 21 17:29:10.50: [  432]: RECV FAX: CDPN 
Jun 21 17:29:16.26: [  432]: --> [5:+FCON]
Jun 21 17:29:17.74: [  432]: --> [29:+FTSI: "0                   "]
Jun 21 17:29:17.74: [  432]: REMOTE TSI "0"
Jun 21 17:29:18.01: [  432]: --> [22:+FDCS: 0,5,0,0,0,0,0,0]
Jun 21 17:29:18.01: [  432]: REMOTE wants 14400 bit/s
Jun 21 17:29:18.01: [  432]: REMOTE wants page width 1728 pixels in 215 mm
Jun 21 17:29:18.01: [  432]: REMOTE wants A4 page length (297 mm)
Jun 21 17:29:18.01: [  432]: REMOTE wants 3.85 line/mm
Jun 21 17:29:18.01: [  432]: REMOTE wants 1-D MR
Jun 21 17:29:18.12: [  432]: --> [2:OK]
Jun 21 17:29:18.12: [  432]: <-- [7:AT+FDR\r]
Jun 21 17:29:21.09: [  432]: --> [5:+FCFR]
Jun 21 17:29:23.17: [  432]: --> [22:+FDCS: 0,5,0,0,0,0,0,0]
Jun 21 17:29:23.17: [  432]: REMOTE wants 14400 bit/s
Jun 21 17:29:23.17: [  432]: REMOTE wants page width 1728 pixels in 215 mm
Jun 21 17:29:23.17: [  432]: REMOTE wants A4 page length (297 mm)
Jun 21 17:29:23.17: [  432]: REMOTE wants 3.85 line/mm
Jun 21 17:29:23.17: [  432]: REMOTE wants 1-D MR
Jun 21 17:29:23.17: [  432]: --> [7:CONNECT]
Jun 21 17:29:23.17: [  432]: RECV: begin page
Jun 21 17:29:23.19: [  432]: MODEM set XON/XOFF/FLUSH: input ignored, output generated
Jun 21 17:29:23.19: [  432]: RECV: send trigger 021
Jun 21 17:29:23.19: [  432]: <-- data [1]
Jun 21 17:29:58.55: [  432]: RECV: 733 total lines, 33 bad lines, 33 consecutive bad lines
Jun 21 17:29:58.55: [  432]: MODEM set XON/XOFF/DRAIN: input interpreted, output disabled
Jun 21 17:29:58.55: [  432]: --> [17:+FPTS: 1,2219,0,0]
Jun 21 17:29:59.57: [  432]: --> [8:+FHNG: 0]
Jun 21 17:29:59.57: [  432]: REMOTE HANGUP: Normal and proper end of connection (code 0)
Jun 21 17:30:01.40: [  432]: --> [2:OK]
Jun 21 17:30:01.40: [  432]: RECV recv MPS (more pages, same document)  //hylafax is waiting for more faxes, but there is no more faxes!
Jun 21 17:30:31.40: [  432]: MODEM TIMEOUT: reading line from modem     //because of the remoteuser is not sending more faxes I get a timeout
Jun 21 17:30:31.40: [  432]: MODEM <Timeout>
Jun 21 17:30:31.40: [  432]: RECV FAX (00000124): recvq/fax00025.tif from 0, route to <unspecified>, 0 pages in 1:21
Jun 21 17:30:31.44: [  432]: RECV FAX: Normal and proper end of connection
Jun 21 17:30:31.44: [  432]: RECV FAX (00000124): session with 0 terminated abnormally: Normal and proper end of connection
Jun 21 17:30:31.44: [  432]: RECV FAX: bin/faxrcvd "recvq/fax00025.tif" "ttyS1" "00000124" "Normal and proper end of connection" ""
Jun 21 17:30:31.80: [  432]: RECV FAX: end
Jun 21 17:30:31.80: [  432]: SESSION END

I hope anyone can solve this problem.
Sorry for my bad english.

Michael Berg
DB Informatiker 


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null