Re: [hylafax-users] No carrier detected Zyxel Elite 2864I

To: hylafax-users@hylafax.org
Subject: Re: [hylafax-users] No carrier detected Zyxel Elite 2864I
From: Mr Poirier Xavier <xpoirier@ch-bourg01.fr>
Date: Mon, 03 Jun 2002 14:33:14 +0200 (CEST)
En r�ponse � Gianluca Simoni <gianluca.simoni@cstnet.it>:

I have the same config as you have with no problem :

the only differences with my config file is :
ModemResetCmds:         AT&Eyour-number
ModemResetCmds:         AT&L930          (for MSN)
ModemResetCmds:         ATS23=3          (for MSN)

here is solving somes problems of answering calls (I have noticed 
that you have not this parameter --> AT+FAA=1
what i have changed to solve this is :
ModemSetupAACmd:        AT+FAA=0 (instead of 1)

It seems to be an initialization problem, what happen when you 
restart hylafax ?

Xavier

> Hi,
> 
>             I'm using  hylafax  4.1beta2 server on a Linux
> SuSE 7.2
> machine. I use a Zyxel Elite 2864I  (MODEM ZYXEL E2864/V
> 3.00a).
> 
> When I try to send a fax I always receive this message "No
> carrier
> detected"
> 
> I try also with Hylafax 4.1.2 but the result no change.
> 
> The modem and the isdn plug are OK (I've used both to connect
> to an
> internet provider).
> 
> This is the log file:
> 
>  
> 
> Jun  3 12:07:34 sinfax FaxSend[12414]: DELAY 75 ms
> 
> Jun  3 12:07:34 sinfax FaxSend[12414]: DELAY 2600 ms
> 
> Jun  3 12:07:37 sinfax FaxSend[12414]: <-- [4:ATZ\r]
> 
> Jun  3 12:07:37 sinfax FaxGetty[11993]: ANSWER: Can not lock
> modem
> device
> 
> Jun  3 12:07:37 sinfax FaxSend[12414]: --> [2:OK]
> 
> Jun  3 12:07:37 sinfax FaxSend[12414]: DELAY 3000 ms
> 
> Jun  3 12:07:40 sinfax FaxSend[12414]: <--
> [19:AT&B1&N0&S0S38.3=1\r]
> 
> Jun  3 12:07:40 sinfax FaxSend[12414]: -->
> [18:AT&B1&N0&S0S38.3=1]
> 
> Jun  3 12:07:40 sinfax FaxSend[12414]: --> [2:OK]
> 
> Jun  3 12:07:40 sinfax FaxSend[12414]: <-- [5:ATE0\r]
> 
> Jun  3 12:07:40 sinfax FaxSend[12414]: --> [4:ATE0]
> 
> Jun  3 12:07:40 sinfax FaxSend[12414]: --> [2:OK]
> 
> Jun  3 12:07:40 sinfax FaxSend[12414]: <-- [5:ATV1\r]
> 
> Jun  3 12:07:41 sinfax FaxSend[12414]: --> [2:OK]
> 
> Jun  3 12:07:41 sinfax FaxSend[12414]: <-- [5:ATQ0\r]
> 
> Jun  3 12:07:41 sinfax FaxSend[12414]: --> [2:OK]
> 
> Jun  3 12:07:41 sinfax FaxSend[12414]: <-- [7:ATS0=0\r]
> 
> Jun  3 12:07:41 sinfax FaxSend[12414]: --> [2:OK]
> 
> Jun  3 12:07:41 sinfax FaxSend[12414]: <-- [7:ATS8=2\r]
> 
> Jun  3 12:07:41 sinfax FaxSend[12414]: --> [2:OK]
> 
> Jun  3 12:07:41 sinfax FaxSend[12414]: <-- [8:ATS7=60\r]
> 
> Jun  3 12:07:41 sinfax FaxSend[12414]: --> [2:OK]
> 
> Jun  3 12:07:41 sinfax FaxSend[12414]: <-- [6:AT&H3\r]
> 
> Jun  3 12:07:41 sinfax FaxSend[12414]: --> [2:OK]
> 
> Jun  3 12:07:41 sinfax FaxSend[12414]: <-- [6:AT&D2\r]
> 
> Jun  3 12:07:41 sinfax FaxSend[12414]: --> [2:OK]
> 
> Jun  3 12:07:41 sinfax FaxSend[12414]: <-- [6:AT&C1\r]
> 
> Jun  3 12:07:41 sinfax FaxSend[12414]: --> [2:OK]
> 
> Jun  3 12:07:41 sinfax FaxSend[12414]: <-- [12:AT+FCLASS=?\r]
> 
> Jun  3 12:07:41 sinfax FaxSend[12414]: -->
> [15:0,1,2,2.0,6,8,Z]
> 
> Jun  3 12:07:41 sinfax FaxSend[12414]: --> [2:OK]
> 
> Jun  3 12:07:41 sinfax FaxSend[12414]: <--
> [14:AT+FCLASS=2.0\r]
> 
> Jun  3 12:07:42 sinfax FaxSend[12414]: --> [2:OK]
> 
> Jun  3 12:07:42 sinfax FaxSend[12414]: <-- [8:AT+FMI?\r]
> 
> Jun  3 12:07:42 sinfax FaxSend[12414]: --> [5:ZyXEL]
> 
> Jun  3 12:07:42 sinfax FaxSend[12414]: --> [2:OK]
> 
> Jun  3 12:07:42 sinfax FaxSend[12414]: <-- [8:AT+FMM?\r]
> 
> Jun  3 12:07:42 sinfax FaxSend[12414]: --> [18:E2864  V 3.00a 
>   ]
> 
> Jun  3 12:07:42 sinfax FaxSend[12414]: --> [2:OK]
> 
> Jun  3 12:07:42 sinfax FaxSend[12414]: <-- [8:AT+FMR?\r]
> 
> Jun  3 12:07:42 sinfax FaxSend[12414]: --> [18:E2864  V 3.00a 
>   ]
> 
> Jun  3 12:07:42 sinfax FaxSend[12414]: --> [2:OK]
> 
> Jun  3 12:07:42 sinfax FaxSend[12414]: <-- [9:AT+FCC=?\r]
> 
> Jun  3 12:07:42 sinfax FaxSend[12414]: -->
> [43:(0,1),(0-5),(0-2),(0-2),(0,1),(0),(0),(0-7)]
> 
> Jun  3 12:07:42 sinfax FaxSend[12414]: --> [2:OK]
> 
> Jun  3 12:07:42 sinfax FaxSend[12414]: <-- [9:AT+FCQ=?\r]
> 
> Jun  3 12:07:42 sinfax FaxSend[12414]: --> [11:(0-2),(0-2)]
> 
> Jun  3 12:07:42 sinfax FaxSend[12414]: --> [2:OK]
> 
> Jun  3 12:07:42 sinfax FaxSend[12414]: <-- [9:AT+FAP=?\r]
> 
> Jun  3 12:07:42 sinfax FaxSend[12414]: --> [5:ERROR]
> 
> Jun  3 12:07:42 sinfax FaxSend[12414]: <-- [9:AT+FSP=?\r]
> 
> Jun  3 12:07:43 sinfax FaxSend[12414]: --> [3:0,1]
> 
> Jun  3 12:07:43 sinfax FaxSend[12414]: --> [2:OK]
> 
> Jun  3 12:07:43 sinfax FaxSend[12414]: <--
> [14:AT+FCLASS=2.0\r]
> 
> Jun  3 12:07:43 sinfax FaxSend[12414]: --> [2:OK]
> 
> Jun  3 12:07:43 sinfax FaxSend[12414]: <-- [9:AT+FLO=2\r]
> 
> Jun  3 12:07:43 sinfax FaxSend[12414]: --> [2:OK]
> 
> Jun  3 12:07:43 sinfax FaxSend[12414]: <-- [9:AT+FPP=0\r]
> 
> Jun  3 12:07:43 sinfax FaxSend[12414]: --> [2:OK]
> 
> Jun  3 12:07:43 sinfax FaxSend[12414]: <-- [9:AT+FBO=0\r]
> 
> Jun  3 12:07:43 sinfax FaxSend[12414]: --> [2:OK]
> 
> Jun  3 12:07:43 sinfax FaxSend[12414]: <-- [10:AT+FCT=30\r]
> 
> Jun  3 12:07:43 sinfax FaxSend[12414]: --> [2:OK]
> 
> Jun  3 12:07:43 sinfax FaxSend[12414]: <--
> [15:AT+FNR=1,1,1,1\r]
> 
> Jun  3 12:07:43 sinfax FaxSend[12414]: --> [2:OK]
> 
> Jun  3 12:07:43 sinfax FaxSend[12414]: <-- [9:AT+FIE=0\r]
> 
> Jun  3 12:07:43 sinfax FaxSend[12414]: --> [2:OK]
> 
> Jun  3 12:07:43 sinfax FaxSend[12414]: <--
> [23:AT+FCC=1,5,2,2,1,0,0,0\r]
> 
> Jun  3 12:07:44 sinfax FaxSend[12414]: --> [2:OK]
> 
> Jun  3 12:07:44 sinfax FaxSend[12414]: MODEM ZYXEL E2864/V
> 3.00a
> 
> Jun  3 12:07:44 sinfax FaxSend[12414]: <-- [5:ATM0\r]
> 
> Jun  3 12:07:44 sinfax FaxSend[12414]: --> [2:OK]
> 
> Jun  3 12:07:44 sinfax FaxSend[12414]: SEND FAX: JOB 4 DEST
> 029036101
> COMMID 00000007 DEVICE '/dev/ttyS0'
> 
> Jun  3 12:08:21 sinfax FaxSend[12414]: SEND FAILED: JOB 4 DEST
> 029036101
> ERR No carrier detected
> 
>  
> 
> I've use this template for Zyxel 2864I :
> 
>  
> 
>  
> 
> CountryCode:                39
> 
> AreaCode:                    2
> 
> FAXNumber:                 +39.05.45.85.75.06
> 
> LongDistancePrefix:      5
> 
> InternationalPrefix:         011
> 
> DialStringRules:            etc/dialrules
> 
> ServerTracing:               2095
> 
> SessionTracing:            2095
> 
> RecvFileMode:              0644
> 
> LogFileMode:                0644
> 
> DeviceMode:                 0600
> 
> RingsBeforeAnswer:      1
> 
> SpeakerVolume:                       on
> 
> GettyArgs:                    "-h %l dx_%s"
> 
> LocalIdentifier:   "CSTNet"
> 
> LogFacility:                   user
> 
> TagLineFont:                 etc/lutRS18.pcf
> 
> TagLineFormat:             "From %%l|%c|Page %%p of %%t"
> 
> NoCarrierRetrys:           3
> 
> MaxRecvPages:                        100
> 
> #
> 
> #
> 
> # Modem-related stuff: should reflect modem command interface
> 
> # and hardware connection/cabling (e.g. flow control).
> 
> #
> 
> ModemType:                 Class2.0           # use class 2.0
> interface
> 
> ModemRate:                 38400               # 38.4 works
> fine
> 
> ModemFlowControl:       rtscts               # default
> 
>  
> 
>  
> 
> #
> 
> ModemNoFlowCmd:      AT&H0             # disable flow control
> 
> ModemHardFlowCmd:   AT&H3             # hardware flow control
> 
> ModemSoftFlowCmd:    AT&H4             # software flow
> control
> 
> ModemSetupDTRCmd:  AT&D2             # DTR off causes modem to
> hang up
> 
> ModemSetupDCDCmd:  AT&C1             # DCD tracks carrier
> 
> #
> 
> ModemSetupAACmd:    AT+FAA=1       # enable in current class
> 
> ModemResetCmds:                  AT&B1&N0&S0S18=4S38.3=1
> 
>  
> 
> #
> 
> ModemDialCmd:                       ATDT0*%s                  
>  # no '@'
> 'cuz then busy not recognized
> 
>  
> 
> NoCarrierRetrys:           3                      # retry 3
> times on no
> carrier
> 
> #
> 
> ModemSetVolumeCmd: "ATM0 ATM1L1 ATM1L3 ATM1L5 ATM1L7"
> 
> #
> 
> # Caller ID configuration setup.
> 
> #
> 
> #QualifyCID:                 etc/cid              # CID access
> control
> list file
> 
> #CIDNumber:                "CALLER NUMBER: " # pattern string
> for phone
> number info
> 
> #CIDName:                   "CALLER NAME: "        # pattern
> string for
> identity info
> 
> #
> 
> PagerSetupCmds:                     AT&K0&N15     # use V.22
> at 1200 bps
> (PageNet)
> 
>  
> 
>  
> 
>  
> 
> I've read the mailing list archive but I've not found the
> answer.
> 
> Can  anyone help me ?
> 
>  
> 
> Thanks.
> 
>  
> 
>  
> 
>  
> 
>  
> 
>  
> 
> *************************************************
> 
>  
> 
> Gianluca Simoni
> 
> e-mail      gianluca.simoni@cstnet.it
> 
>  
> 
> *************************************************
> 
>  
> 
>  
> 
>  
> 
> 

mailto: xpoirier@ch-bourg01.fr

--------------------------------------------------------------------
Ce courriel est envoy� au travers de l' interface IMP: ch-bourg01.fr
Ce message a �t� pass� automatiquement � l' antivirus par Amavis 


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
References:
- [hylafax-users] No carrier detected Zyxel Elite 2864I
  - From: Gianluca Simoni
- [hylafax-users] No carrier detected Zyxel Elite 2864I
  - From: Gianluca Simoni
Prev by Date: Re: [hylafax-users] File conversion
Next by Date: [hylafax-users] Faxing a landscape PDF file with faxmail
Previous by thread: [hylafax-users] No carrier detected Zyxel Elite 2864I
Next by thread: [hylafax-users] Faxing a landscape PDF file with faxmail
Index(es):
- Main
- Thread
Project hosted by iFAX Solutions