[hylafax-users] AW: problems

["Philipp Dreimann" <p.dreimann@global-owl.de>]

Heres the probemodem output:
---start

probemodem
Serial port that modem is connected to []? ttyS0
Hmm, there does not appear to be an fuser command on your machine.
This means that I am unable to insure that all processes using the
modem have been killed.  I will keep going, but beware that you may
have competition for the modem.

Now we are going to probe the tty port.  This takes a few seconds,
so be patient.  Note that if you do not have the modem cabled to
the port, or the modem is turned off, this may hang (just go and
cable up the modem or turn it on, or whatever).

Probing for best speed to talk to modem: 38400 OK.
[1]+  Terminated              ( trap 0 1 2; while true; do
    sleep 10; echo ""; echo "Hmm, something seems to be hung, check your
modem eh?";
done )

This looks like a Class 1 modem.

/bin/stty: standard input: unable to perform all requested operations
ATI0    RESULT = "OK"   RESPONSE = "57600"
/bin/stty: standard input: unable to perform all requested operations
ATI1    RESULT = "OK"   RESPONSE = "CD08.55 - 655 (04/17/2001) SERIAL -
DSP PATCH: 001.72"
/bin/stty: standard input: unable to perform all requested operations
ATI2    RESULT = "OK"   RESPONSE = "ROM TEST OK"
/bin/stty: standard input: unable to perform all requested operations
ATI3    RESULT = "OK"   RESPONSE = "MD56xx"

Class 1 stuff...

/bin/stty: standard input: unable to perform all requested operations
AT+FCLASS=?     RESULT = "OK"   RESPONSE = "0,1,8"
/bin/stty: standard input: unable to perform all requested operations
AT+FCLASS?      RESULT = "OK"   RESPONSE = "1"
/bin/stty: standard input: unable to perform all requested operations
AT+FCLASS=0     RESULT = "OK"   RESPONSE = "OK"
/bin/stty: standard input: unable to perform all requested operations
AT+FCLASS=1     RESULT = "OK"   RESPONSE = "OK"
/bin/stty: standard input: unable to perform all requested operations
AT+FCLASS?      RESULT = "OK"   RESPONSE = "1"
/bin/stty: standard input: unable to perform all requested operations
AT+FJUNK=?      RESULT = "ERROR"        RESPONSE = "ERROR"
/bin/stty: standard input: unable to perform all requested operations
AT+FJUNK?       RESULT = "ERROR"        RESPONSE = "ERROR"
/bin/stty: standard input: unable to perform all requested operations
AT+FAA=?        RESULT = "OK"   RESPONSE = "(0-1)"
/bin/stty: standard input: unable to perform all requested operations
AT+FAA? RESULT = "OK"   RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FAE=?        RESULT = "OK"   RESPONSE = "(0-1)"
/bin/stty: standard input: unable to perform all requested operations
AT+FAE? RESULT = "OK"   RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FTH=?        RESULT = "OK"   RESPONSE = "3"
/bin/stty: standard input: unable to perform all requested operations
AT+FRH=?        RESULT = "OK"   RESPONSE = "3"
/bin/stty: standard input: unable to perform all requested operations
AT+FTM=?        RESULT = "OK"   RESPONSE =
"24,48,72,73,74,96,97,98,121,122,145,146"
/bin/stty: standard input: unable to perform all requested operations
AT+FRM=?        RESULT = "OK"   RESPONSE =
"24,48,72,73,74,96,97,98,121,122,145,146"
/bin/stty: standard input: unable to perform all requested operations
AT+FTS=?        RESULT = "ERROR"        RESPONSE = "ERROR"
/bin/stty: standard input: unable to perform all requested operations
AT+FRS=?        RESULT = "ERROR"        RESPONSE = "ERROR"

---end
And heres 
One session log of a fax with 4 pages with an tiff file as source:
---start

May 28 20:34:06.74: [ 7056]: SESSION BEGIN 00000007 4952319440401
May 28 20:34:06.74: [ 7056]: SEND FAX: JOB 4 DEST 9440401 COMMID
00000007
May 28 20:34:06.74: [ 7056]: DELAY 2600 ms
May 28 20:34:09.34: [ 7056]: <-- [15:ATE0V1Q0S0=0H0\r]
May 28 20:34:09.54: [ 7056]: --> [2:OK]
May 28 20:34:09.54: [ 7056]: <-- [12:ATS8=2S7=60\r]
May 28 20:34:09.69: [ 7056]: --> [2:OK]
May 28 20:34:09.69: [ 7056]: <-- [12:AT+FCLASS=1\r]
May 28 20:34:09.84: [ 7056]: --> [2:OK]
May 28 20:34:09.84: [ 7056]: <-- [5:ATM0\r]
May 28 20:34:09.98: [ 7056]: --> [2:OK]
May 28 20:34:09.98: [ 7056]: <-- [12:AT+FCLASS=1\r]
May 28 20:34:10.23: [ 7056]: --> [2:OK]
May 28 20:34:10.23: [ 7056]: DIAL 9440401
May 28 20:34:10.23: [ 7056]: <-- [12:ATDT9440401\r]
May 28 20:34:27.36: [ 7056]: --> [7:CONNECT]
May 28 20:34:28.99: [ 7056]: --> [2:OK]
May 28 20:34:28.99: [ 7056]: <-- [9:AT+FRH=3\r]
May 28 20:34:29.03: [ 7056]: --> [7:CONNECT]
May 28 20:34:29.69: [ 7056]: --> [2:OK]
May 28 20:34:29.69: [ 7056]: REMOTE CSI "+49 5231 9440401"
May 28 20:34:29.69: [ 7056]: <-- [9:AT+FRH=3\r]
May 28 20:34:29.73: [ 7056]: --> [7:CONNECT]
May 28 20:34:29.93: [ 7056]: --> [2:OK]
May 28 20:34:29.93: [ 7056]: REMOTE best rate 9600 bit/s
May 28 20:34:29.93: [ 7056]: REMOTE max page width 1728 pixels in 215 mm
May 28 20:34:29.93: [ 7056]: REMOTE max unlimited page length
May 28 20:34:29.93: [ 7056]: REMOTE best vres 7.7 line/mm
May 28 20:34:29.93: [ 7056]: REMOTE best format 2-D MR
May 28 20:34:29.93: [ 7056]: REMOTE best 20 ms, 10 ms/scanline
May 28 20:34:29.93: [ 7056]: USE 9600 bit/s
May 28 20:34:29.93: [ 7056]: USE 20 ms, 10 ms/scanline
May 28 20:34:29.93: [ 7056]: SEND file "docq/doc4.cover;40"
May 28 20:34:29.93: [ 7056]: USE page width 1728 pixels in 215 mm
May 28 20:34:29.93: [ 7056]: USE unlimited page length
May 28 20:34:29.93: [ 7056]: USE 3.85 line/mm
May 28 20:34:29.93: [ 7056]: USE 2-D MR
May 28 20:34:29.93: [ 7056]: SEND training at v.29 9600 bit/s
May 28 20:34:29.93: [ 7056]: <-- [9:AT+FTH=3\r]
May 28 20:34:30.02: [ 7056]: --> [7:CONNECT]
May 28 20:34:30.02: [ 7056]: <-- data [23]
May 28 20:34:30.02: [ 7056]: <-- data [2]
May 28 20:34:31.76: [ 7056]: --> [7:CONNECT]
May 28 20:34:31.76: [ 7056]: <-- data [6]
May 28 20:34:31.76: [ 7056]: <-- data [2]
May 28 20:34:32.06: [ 7056]: --> [2:OK]
May 28 20:34:32.06: [ 7056]: DELAY 75 ms
May 28 20:34:32.14: [ 7056]: <-- [10:AT+FTM=96\r]
May 28 20:34:32.26: [ 7056]: --> [7:CONNECT]
May 28 20:34:32.26: [ 7056]: <-- data [1024]
May 28 20:34:32.26: [ 7056]: <-- data [776]
May 28 20:34:32.26: [ 7056]: <-- data [2]
May 28 20:34:34.07: [ 7056]: --> [2:OK]
May 28 20:34:34.07: [ 7056]: <-- [9:AT+FRH=3\r]
May 28 20:34:34.40: [ 7056]: --> [7:CONNECT]
May 28 20:34:35.59: [ 7056]: --> [2:OK]
May 28 20:34:35.59: [ 7056]: TRAINING succeeded
May 28 20:34:35.59: [ 7056]: <-- [10:AT+FTM=96\r]
May 28 20:34:35.71: [ 7056]: --> [7:CONNECT]
May 28 20:34:35.71: [ 7056]: SEND begin page
May 28 20:34:35.71: [ 7056]: <-- data [1028]
May 28 20:34:35.71: [ 7056]: <-- data [1024]
May 28 20:34:35.71: [ 7056]: <-- data [1026]
May 28 20:34:35.71: [ 7056]: <-- data [1024]
May 28 20:34:35.71: [ 7056]: <-- data [1027]
May 28 20:34:37.00: [ 7056]: <-- data [1025]
May 28 20:34:37.00: [ 7056]: <-- data [1024]
May 28 20:34:38.15: [ 7056]: <-- data [1025]
May 28 20:34:38.73: [ 7056]: <-- data [1026]
May 28 20:34:39.88: [ 7056]: <-- data [1026]
May 28 20:34:40.44: [ 7056]: <-- data [1026]
May 28 20:34:41.61: [ 7056]: <-- data [1029]
May 28 20:34:42.17: [ 7056]: <-- data [1026]
May 28 20:34:43.35: [ 7056]: <-- data [1024]
May 28 20:34:43.93: [ 7056]: <-- data [1024]
May 28 20:34:45.13: [ 7056]: <-- data [1024]
May 28 20:34:45.72: [ 7056]: <-- data [1024]
May 28 20:34:46.87: [ 7056]: <-- data [1024]
May 28 20:34:47.45: [ 7056]: <-- data [1025]
May 28 20:34:48.60: [ 7056]: <-- data [1030]
May 28 20:34:49.16: [ 7056]: <-- data [237]
May 28 20:34:49.16: [ 7056]: SENT 20717 bytes of data
May 28 20:34:49.16: [ 7056]: SEND 2D RTC
May 28 20:34:49.16: [ 7056]: <-- data [30]
May 28 20:34:49.75: [ 7056]: <-- data [2]
May 28 20:34:49.75: [ 7056]: SEND end page
May 28 20:34:53.31: [ 7056]: --> [2:OK]
May 28 20:34:53.31: [ 7056]: DELAY 75 ms
May 28 20:34:53.39: [ 7056]: SEND send MPS (more pages, same document)
May 28 20:34:53.39: [ 7056]: <-- [9:AT+FTH=3\r]
May 28 20:34:53.43: [ 7056]: --> [7:CONNECT]
May 28 20:34:53.43: [ 7056]: <-- data [3]
May 28 20:34:53.43: [ 7056]: <-- data [2]
May 28 20:34:54.63: [ 7056]: --> [2:OK]
May 28 20:34:54.63: [ 7056]: <-- [9:AT+FRH=3\r]
May 28 20:34:54.75: [ 7056]: --> [7:CONNECT]
May 28 20:34:55.93: [ 7056]: --> [2:OK]
May 28 20:34:55.93: [ 7056]: SEND recv RTP (retrain positive)
May 28 20:34:55.93: [ 7056]: SEND FAX (00000007): FROM
root@go-gate-lbm.lan TO 9440401 (page 1 of 2 sent in 0:26)
May 28 20:34:55.93: [ 7056]: SEND FAX (00000007): FROM
root@go-gate-lbm.lan TO 9440401 (docq/doc4.cover;40 sent in 0:26)
May 28 20:34:55.93: [ 7056]: SEND file "docq/doc7.tif;40"
May 28 20:34:55.93: [ 7056]: USE page width 1728 pixels in 215 mm
May 28 20:34:55.93: [ 7056]: USE unlimited page length
May 28 20:34:55.93: [ 7056]: USE 3.85 line/mm
May 28 20:34:55.93: [ 7056]: USE 2-D MR
May 28 20:34:55.93: [ 7056]: SEND training at v.29 9600 bit/s
May 28 20:34:55.93: [ 7056]: <-- [9:AT+FTH=3\r]
May 28 20:34:56.02: [ 7056]: --> [7:CONNECT]
May 28 20:34:56.02: [ 7056]: <-- data [23]
May 28 20:34:56.02: [ 7056]: <-- data [2]
May 28 20:34:57.76: [ 7056]: --> [7:CONNECT]
May 28 20:34:57.76: [ 7056]: <-- data [6]
May 28 20:34:57.76: [ 7056]: <-- data [2]
May 28 20:34:58.06: [ 7056]: --> [2:OK]
May 28 20:34:58.06: [ 7056]: DELAY 75 ms
May 28 20:34:58.14: [ 7056]: <-- [10:AT+FTM=96\r]
May 28 20:34:58.26: [ 7056]: --> [7:CONNECT]
May 28 20:34:58.26: [ 7056]: <-- data [1024]
May 28 20:34:58.26: [ 7056]: <-- data [776]
May 28 20:34:58.26: [ 7056]: <-- data [2]
May 28 20:35:00.07: [ 7056]: --> [2:OK]
May 28 20:35:00.07: [ 7056]: <-- [9:AT+FRH=3\r]
May 28 20:35:00.39: [ 7056]: --> [7:CONNECT]
May 28 20:35:01.58: [ 7056]: --> [2:OK]
May 28 20:35:01.58: [ 7056]: TRAINING succeeded
May 28 20:35:01.58: [ 7056]: <-- [10:AT+FTM=96\r]
May 28 20:35:01.69: [ 7056]: --> [7:CONNECT]
May 28 20:35:01.69: [ 7056]: SEND begin page
May 28 20:35:01.69: [ 7056]: <-- data [1029]
May 28 20:35:01.69: [ 7056]: <-- data [1032]
May 28 20:35:01.69: [ 7056]: <-- data [1026]
May 28 20:35:01.69: [ 7056]: <-- data [1030]
May 28 20:35:01.95: [ 7056]: <-- data [1030]
May 28 20:35:02.97: [ 7056]: <-- data [1028]
May 28 20:35:03.55: [ 7056]: <-- data [925]
May 28 20:35:04.14: [ 7056]: SENT 7063 bytes of data
May 28 20:35:04.14: [ 7056]: SEND 2D RTC
May 28 20:35:04.14: [ 7056]: <-- data [30]
May 28 20:35:04.14: [ 7056]: <-- data [2]
May 28 20:35:04.14: [ 7056]: SEND end page
May 28 20:35:07.91: [ 7056]: --> [2:OK]
May 28 20:35:07.91: [ 7056]: DELAY 95 ms
May 28 20:35:08.01: [ 7056]: SEND send EOP (no more pages or documents)
May 28 20:35:08.01: [ 7056]: <-- [9:AT+FTH=3\r]
May 28 20:35:08.05: [ 7056]: --> [7:CONNECT]
May 28 20:35:08.05: [ 7056]: <-- data [3]
May 28 20:35:08.05: [ 7056]: <-- data [2]
May 28 20:35:09.25: [ 7056]: --> [2:OK]
May 28 20:35:09.25: [ 7056]: <-- [9:AT+FRH=3\r]
May 28 20:35:09.41: [ 7056]: --> [7:CONNECT]
May 28 20:35:10.59: [ 7056]: --> [2:OK]
May 28 20:35:10.59: [ 7056]: SEND recv MCF (message confirmation)
May 28 20:35:10.59: [ 7056]: SEND FAX (00000007): FROM
root@go-gate-lbm.lan TO 9440401 (page 2 of 2 sent in 0:15)
May 28 20:35:10.59: [ 7056]: SEND FAX (00000007): FROM
root@go-gate-lbm.lan TO 9440401 (docq/doc7.tif;40 sent in 0:15)
May 28 20:35:10.59: [ 7056]: <-- [9:AT+FTH=3\r]
May 28 20:35:10.68: [ 7056]: --> [7:CONNECT]
May 28 20:35:10.68: [ 7056]: <-- data [3]
May 28 20:35:10.68: [ 7056]: <-- data [2]
May 28 20:35:11.89: [ 7056]: --> [2:OK]
May 28 20:35:11.89: [ 7056]: <-- [5:ATH0\r]
May 28 20:35:12.06: [ 7056]: --> [2:OK]
May 28 20:35:12.06: [ 7056]: SESSION END

---end

The session above has send one page which was okay - (a standart suse
cover page) and a 2nd page wich was not okay... On the first  6cm's
where only some long and short black lines...


Philipp

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null