[hylafax-users] Fwd: 0 pages printing with whfc

[Robert Davidson <r.davidson@mindspring.com>]

Hello all,

I have managed to wade through getting Hylafax 4.1 installed on SuSE 7.3 with 
ghostscript 6.51-41 (both X1ll and vga) so that it faxes fine using sendfax, 
and even getting a Win98 2nd Edition client using whfc 1.08 to connect to the 
server (I can see the send and done logs), but I can't get a Win98 client to 
send a non-blank fax.

I have tried Apple Laserwriter 16/600, HP LJ 4/4m PS and the Generic Adobe
printer drivers. I am printing from notepad.exe, so it doesn't get much more 
basic than that. There is no cover page configured, I have tried A4 and 
letter in notepad's page setup and whfc dialog. I have tried fine resolution 
and regular and all combinations inbetween. The modem will dial the fax 
machine, connect, then disconnect.

If the job log will be helpful, I have copied it below. Any help getting whfc
to stop teasing me would be very appreciated. It looks like this is a fairly
common problem, but I have tried what I found in the whfc FAQ and in the
archives without success.

Best Regards,

Robert Davidson


May 07 06:49:36.38: [ 2980]: SESSION BEGIN 00000020 19722146531776
May 07 06:49:36.38: [ 2980]: HylaFAX (tm) Version 4.1
May 07 06:49:36.38: [ 2980]: SEND FAX: JOB 11 DEST 2146531776 COMMID 00000020
May 07 06:49:36.38: [ 2980]: DEVICE '/dev/ttyS1'
May 07 06:49:36.38: [ 2980]: DELAY 75 ms
May 07 06:49:36.46: [ 2980]: DELAY 2600 ms
May 07 06:49:39.06: [ 2980]: <-- [4:ATZ\r]
May 07 06:49:39.19: [ 2980]: --> [2:OK]
May 07 06:49:39.19: [ 2980]: <-- [5:ATE0\r]
May 07 06:49:39.32: [ 2980]: --> [4:ATE0]
May 07 06:49:39.32: [ 2980]: --> [2:OK]
May 07 06:49:39.32: [ 2980]: <-- [5:ATV1\r]
May 07 06:49:39.45: [ 2980]: --> [2:OK]
May 07 06:49:39.45: [ 2980]: <-- [7:ATQ0X4\r]
May 07 06:49:39.59: [ 2980]: --> [2:OK]
May 07 06:49:39.59: [ 2980]: <-- [7:ATS0=0\r]
May 07 06:49:39.72: [ 2980]: --> [2:OK]
May 07 06:49:39.72: [ 2980]: <-- [7:ATS8=2\r]
May 07 06:49:39.85: [ 2980]: --> [2:OK]
May 07 06:49:39.85: [ 2980]: <-- [8:ATS7=60\r]
May 07 06:49:39.98: [ 2980]: --> [2:OK]
May 07 06:49:39.98: [ 2980]: <-- [12:AT&H1&I0&R2\r]
May 07 06:49:40.11: [ 2980]: --> [2:OK]
May 07 06:49:40.11: [ 2980]: <-- [11:ATS13=1&D2\r]
May 07 06:49:40.24: [ 2980]: --> [2:OK]
May 07 06:49:40.24: [ 2980]: <-- [6:AT&C1\r]
May 07 06:49:40.37: [ 2980]: --> [2:OK]
May 07 06:49:40.37: [ 2980]: <-- [14:AT+FCLASS=2.0\r]
May 07 06:49:40.50: [ 2980]: --> [2:OK]
May 07 06:49:40.50: [ 2980]: <-- [9:AT+FLO=2\r]
May 07 06:49:40.65: [ 2980]: --> [2:OK]
May 07 06:49:40.65: [ 2980]: <-- [9:AT+FPP=0\r]
May 07 06:49:40.78: [ 2980]: --> [2:OK]
May 07 06:49:40.78: [ 2980]: <-- [9:AT+FBO=0\r]
May 07 06:49:40.92: [ 2980]: --> [2:OK]
May 07 06:49:40.92: [ 2980]: <-- [10:AT+FCT=30\r]
May 07 06:49:41.06: [ 2980]: --> [2:OK]
May 07 06:49:41.06: [ 2980]: <-- [15:AT+FNR=1,1,1,0\r]
May 07 06:49:41.20: [ 2980]: --> [2:OK]
May 07 06:49:41.20: [ 2980]: <-- [9:AT+FIE=0\r]
May 07 06:49:41.34: [ 2980]: --> [2:OK]
May 07 06:49:41.34: [ 2980]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
May 07 06:49:41.48: [ 2980]: --> [2:OK]
May 07 06:49:41.48: [ 2980]: <-- [5:ATM1\r]
May 07 06:49:41.61: [ 2980]: --> [2:OK]
May 07 06:49:41.61: [ 2980]: <-- [14:AT+FCLASS=2.0\r]
May 07 06:49:41.84: [ 2980]: --> [2:OK]
May 07 06:49:41.84: [ 2980]: <-- [9:AT+FLO=2\r]
May 07 06:49:42.08: [ 2980]: --> [2:OK]
May 07 06:49:42.09: [ 2980]: <-- [9:AT+FPP=0\r]
May 07 06:49:42.32: [ 2980]: --> [2:OK]
May 07 06:49:42.32: [ 2980]: <-- [9:AT+FBO=0\r]
May 07 06:49:42.56: [ 2980]: --> [2:OK]
May 07 06:49:42.56: [ 2980]: <-- [10:AT+FCT=30\r]
May 07 06:49:42.80: [ 2980]: --> [2:OK]
May 07 06:49:42.80: [ 2980]: <-- [15:AT+FNR=1,1,1,0\r]
May 07 06:49:43.04: [ 2980]: --> [2:OK]
May 07 06:49:43.04: [ 2980]: <-- [9:AT+FIE=0\r]
May 07 06:49:43.28: [ 2980]: --> [2:OK]
May 07 06:49:43.28: [ 2980]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
May 07 06:49:43.52: [ 2980]: --> [2:OK]
May 07 06:49:43.52: [ 2980]: <-- [18:AT+FLI="Davidson"\r]
May 07 06:49:43.76: [ 2980]: --> [2:OK]
May 07 06:49:43.76: [ 2980]: DIAL 2146531776
May 07 06:49:43.76: [ 2980]: <-- [15:ATDT2146531776\r]
May 07 06:50:03.52: [ 2980]: --> [4:+FCO]
May 07 06:50:05.59: [ 2980]: --> [20:+FIS:1,5,0,2,1,0,0,5]
May 07 06:50:05.59: [ 2980]: --> [2:OK]
May 07 06:50:05.59: [ 2980]: REMOTE best rate 14400 bit/s
May 07 06:50:05.59: [ 2980]: REMOTE max page width 1728 pixels in 215 mm
May 07 06:50:05.59: [ 2980]: REMOTE max unlimited page length
May 07 06:50:05.59: [ 2980]: REMOTE best vres 7.7 line/mm
May 07 06:50:05.59: [ 2980]: REMOTE best format 2-D MR
May 07 06:50:05.59: [ 2980]: REMOTE best 20 ms/scanline
May 07 06:50:05.59: [ 2980]: USE 14400 bit/s
May 07 06:50:05.59: [ 2980]: USE 20 ms/scanline
May 07 06:50:05.59: [ 2980]: <-- [5:ATH0\r]
May 07 06:50:05.82: [ 2980]: --> [2:OK]
May 07 06:50:05.82: [ 2980]: SESSION END

-------------------------------------------------------

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null