[hylafax-users] fax receive does not work correctly

[=?Windows-1252?Q?Holger_B=F6hnke?= <hyla@amarin.de>]

Hi All,

I have a hylafax setup on SuSE 7.2.
Everything works fine when sending.

When I receive faxes, however I get reproducable
errors on some fax machines, on others not.

Hylafax says the connection has been ended normally
but the sending fax displays an error.
This error occurs only after the *last* page has been
transmitted. When I send more pages, they all get
transmitted nicely until again an error occurs
after the last page.

I can read the received fax perfectly but the person who
sent the fax usually resends it because of the error message.

With other types of fax machines it works however...

Anyone any idea?



---------------
here's the output of one of the received faxes:

May 07 14:23:58.79: [  643]: SESSION BEGIN 00000022 491234567890
May 07 14:23:58.79: [  643]: <-- [4:ATA\r]
May 07 14:24:06.84: [  643]: --> [5:+FCON]
May 07 14:24:06.84: [  643]: MODEM set baud rate: 19200 baud (flow control
unchanged)
May 07 14:24:06.84: [  643]: MODEM set baud rate: 19200 baud, input flow
XON/XOFF, output flow XON/XOFF
May 07 14:24:06.84: [  643]: ANSWER: FAX CONNECTION
May 07 14:24:06.84: [  643]: MODEM input buffering enabled
May 07 14:24:06.84: [  643]: RECV FAX: begin
May 07 14:24:06.84: [  643]: RECV FAX: CDPN
May 07 14:24:08.48: [  643]: --> [29:+FTSI: " +49 123 456 7890   "]
May 07 14:24:08.48: [  643]: REMOTE TSI "+49 123 456 7890"
May 07 14:24:08.81: [  643]: --> [22:+FDCS: 0,3,0,2,1,0,0,5]
May 07 14:24:08.81: [  643]: REMOTE wants 9600 bit/s
May 07 14:24:08.81: [  643]: REMOTE wants page width 1728 pixels in 215 mm
May 07 14:24:08.81: [  643]: REMOTE wants unlimited page length
May 07 14:24:08.81: [  643]: REMOTE wants 3.85 line/mm
May 07 14:24:08.81: [  643]: REMOTE wants 2-D MR
May 07 14:24:08.92: [  643]: --> [2:OK]
May 07 14:24:08.92: [  643]: ACCEPT TSI "+49 123 456 7890"
May 07 14:24:08.92: [  643]: <-- [7:AT+FDR\r]
May 07 14:24:10.52: [  643]: --> [5:+FCFR]
May 07 14:24:12.94: [  643]: --> [22:+FDCS: 0,3,0,2,1,0,0,5]
May 07 14:24:12.94: [  643]: REMOTE wants 9600 bit/s
May 07 14:24:12.94: [  643]: REMOTE wants page width 1728 pixels in 215 mm
May 07 14:24:12.94: [  643]: REMOTE wants unlimited page length
May 07 14:24:12.94: [  643]: REMOTE wants 3.85 line/mm
May 07 14:24:12.94: [  643]: REMOTE wants 2-D MR
May 07 14:24:12.94: [  643]: --> [7:CONNECT]
May 07 14:24:12.94: [  643]: RECV: begin page
May 07 14:24:12.94: [  643]: MODEM set XON/XOFF/FLUSH: input ignored, output
generated
May 07 14:24:12.94: [  643]: RECV: send trigger 022
May 07 14:24:12.94: [  643]: <-- data [1]
May 07 14:24:42.56: [  643]: RECV: 1161 total lines, 0 bad lines, 0
consecutive bad lines
May 07 14:24:42.56: [  643]: MODEM set XON/XOFF/DRAIN: input interpreted,
output disabled
May 07 14:24:42.56: [  643]: --> [17:+FPTS: 2,2219,0,0]
May 07 14:24:47.84: [  643]: --> [7:+FET: 2]
May 07 14:24:47.84: [  643]: RECV recv EOP (no more pages or documents)
May 07 14:24:47.84: [  643]: --> [2:OK]
May 07 14:24:47.84: [  643]: RECV send MCF (message confirmation)
May 07 14:24:47.84: [  643]: RECV FAX (00000022): from +49 123 456 7890,
page 1 in 0:39, INF, 3.85 line/mm, 2-D MR
May 07 14:24:47.84: [  643]: RECV FAX (00000022): recvq/fax00035.tif from
+49 123 456 7890, route to <unspecified>, 1 pages in 0:41
May 07 14:24:47.84: [  643]: <-- [7:AT+FDR\r]
May 07 14:24:50.64: [  643]: --> [8:+FHNG: 0]
May 07 14:24:50.64: [  643]: REMOTE HANGUP: Normal and proper end of
connection (code 0)
May 07 14:24:50.64: [  643]: RECV FAX: bin/faxrcvd "recvq/fax00035.tif"
"modem" "00000022" "" ""
May 07 14:24:51.00: [  643]: RECV FAX: end
May 07 14:24:51.00: [  643]: SESSION END



____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null