HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] HYLAFAX - DATASENDING PROBLEM



Try setting your modem in class1

--- benjamin@deltson.com wrote:
> Hi !
> i'm experiencing a problem on the installation of
> the Hylafax Server.
> That's my configuration : 
> 
> Linux Mandrake 8.1
> Modem Dynalink 1414 VQE (but i've tried with 3
> differents modems)
> Hylafax 4.1.1
> WHFC v 1.0.8
> 
> After my installation, i've done a test, the fax
> sendind from the server 
> (the fax-client of mandrake) worked without any
> problem. 
> On the other hand it is impossible for me to send a
> fax from a computer in the local area network ! 
> When I sendings the fax (with the fax-client WHFC)
> the modem (connected on the serv port com1) answers
> well,
> it dial the fax number, but at the time of sending
> data the communication is suddenly interrupted. 
> I give you the part of the log where is the error : 
> 
> avr 10 10:37:50.76: [12039]: DIAL 0479258929
> avr 10 10:37:50.76: [12039]: <--
> [15:ATDT0479258929\r]
> avr 10 10:38:16.66: [12039]: --> [5:+FCON]
> avr 10 10:38:18.80: [12039]: --> [29:+FCSI: " 33 04
> 79251106     "]
> avr 10 10:38:18.80: [12039]: REMOTE CSI "33 04
> 79251106"
> avr 10 10:38:19.17: [12039]: --> [22:+FDIS:
> 1,3,2,2,0,0,0,0]
> avr 10 10:38:19.28: [12039]: --> [2:OK]
> avr 10 10:38:19.28: [12039]: REMOTE best rate 9600
> bit/s
> avr 10 10:38:19.28: [12039]: REMOTE max page width
> 2432 pixels in 303 mm
> avr 10 10:38:19.28: [12039]: REMOTE max unlimited
> page length
> avr 10 10:38:19.28: [12039]: REMOTE best vres 7.7
> line/mm
> avr 10 10:38:19.28: [12039]: REMOTE best format 1-D
> MR
> avr 10 10:38:19.28: [12039]: REMOTE best 0
> ms/scanline
> avr 10 10:38:19.28: [12039]: USE 9600 bit/s
> avr 10 10:38:19.28: [12039]: USE 0 ms/scanline
> avr 10 10:38:19.28: [12039]: <-- [5:ATH0\r]
> avr 10 10:38:19.53: [12039]: --> [9:+FHNG: 20]
> avr 10 10:38:19.53: [12039]: REMOTE HANGUP:
> Unspecified Transmit Phase B error (code 20)
> avr 10 10:38:20.51: [12039]: --> [2:OK]
> avr 10 10:38:20.51: [12039]: SESSION END 
> 
> I've also tried with 2 different fax-number without
> any results...
> Could you help me please ? it is very important for
> my job !
> 
> Best Regards.
> 
> Ps : Excuse my poor language but i'm french :)


__________________________________________________
Do You Yahoo!?
Yahoo! Tax Center - online filing with TurboTax
http://taxes.yahoo.com/

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null




Project hosted by iFAX Solutions