Re: [hylafax-users] How 2D-MR work?

[procadas@creditus.pt]

That log was one that I picked from hylafax to comment as an example. The
correct one follow:

Apr 04 13:24:20.60: [ 7173]: SEND FAX: JOB 1750 DEST xxxxxxx COMMID
00003694 DEVICE '/dev/ttyS1'
Apr 04 13:24:20.60: [ 7173]: DELAY 75 ms
Apr 04 13:24:20.68: [ 7173]: DELAY 2600 ms
Apr 04 13:24:23.28: [ 7173]: <-- [4:ATZ\r]
Apr 04 13:24:23.41: [ 7173]: --> [2:OK]
Apr 04 13:24:23.41: [ 7173]: DELAY 3000 ms
Apr 04 13:24:26.41: [ 7173]: <-- [5:ATE0\r]
Apr 04 13:24:26.42: [ 7173]: --> [4:ATE0]
Apr 04 13:24:26.42: [ 7173]: --> [2:OK]
Apr 04 13:24:26.42: [ 7173]: <-- [5:ATV1\r]
Apr 04 13:24:26.43: [ 7173]: --> [2:OK]
Apr 04 13:24:26.43: [ 7173]: <-- [5:ATQ0\r]
Apr 04 13:24:26.44: [ 7173]: --> [2:OK]
Apr 04 13:24:26.44: [ 7173]: <-- [7:ATS0=0\r]
Apr 04 13:24:26.45: [ 7173]: --> [2:OK]
Apr 04 13:24:26.45: [ 7173]: <-- [7:ATS8=2\r]
Apr 04 13:24:26.46: [ 7173]: --> [2:OK]
Apr 04 13:24:26.46: [ 7173]: <-- [8:ATS7=60\r]
Apr 04 13:24:26.48: [ 7173]: --> [2:OK]
Apr 04 13:24:26.48: [ 7173]: <-- [12:AT+FCLASS=1\r]
Apr 04 13:24:26.50: [ 7173]: --> [2:OK]
Apr 04 13:24:26.50: [ 7173]: <-- [5:ATM0\r]
Apr 04 13:24:26.51: [ 7173]: --> [2:OK]
Apr 04 13:24:26.51: [ 7173]: <-- [12:AT+FCLASS=1\r]
Apr 04 13:24:26.63: [ 7173]: --> [2:OK]
Apr 04 13:24:26.63: [ 7173]: DIAL 0,xxxxxxxx
Apr 04 13:24:26.63: [ 7173]: <-- [16:ATDT0,xxxxxxx\r]
Apr 04 13:24:48.07: [ 7173]: --> [7:CONNECT]
Apr 04 13:24:49.96: [ 7173]: --> [2:OK]
Apr 04 13:24:49.96: [ 7173]: REMOTE NSF "00 00 79 00 00 00 82 0F 09 12 00
10 05 02 85 C
8 88 80 80 01 01 49 02 47 41 4C 45 52 49 41 53 20 50 52 49 4D 4F 52 20 03
BA"
Apr 04 13:24:49.96: [ 7173]: NSF remote fax equipment: Panasonic
Apr 04 13:24:49.96: [ 7173]: NSF remote station ID: "xxxxxxxxx "
Apr 04 13:24:49.96: [ 7173]: <-- [9:AT+FRH=3\r]
Apr 04 13:24:49.98: [ 7173]: --> [7:CONNECT]
Apr 04 13:24:50.65: [ 7173]: --> [2:OK]
Apr 04 13:24:50.65: [ 7173]: REMOTE CSI "xxxxxxxx"
Apr 04 13:24:50.65: [ 7173]: <-- [9:AT+FRH=3\r]
Apr 04 13:24:50.67: [ 7173]: --> [7:CONNECT]
Apr 04 13:24:50.92: [ 7173]: --> [2:OK]
Apr 04 13:24:50.92: [ 7173]: REMOTE best rate 9600 bit/s
Apr 04 13:24:50.92: [ 7173]: REMOTE max page width 1728 pixels in 215 mm
Apr 04 13:24:50.92: [ 7173]: REMOTE max unlimited page length
Apr 04 13:24:50.92: [ 7173]: REMOTE best vres 7.7 line/mm
Apr 04 13:24:50.92: [ 7173]: REMOTE best format 1-D MR
Apr 04 13:24:50.92: [ 7173]: REMOTE best 20 ms, 10 ms/scanline
Apr 04 13:24:50.92: [ 7173]: USE 9600 bit/s
Apr 04 13:24:50.92: [ 7173]: USE 20 ms, 10 ms/scanline
Apr 04 13:24:50.92: [ 7173]: SEND file "docq/doc1750.ps;01"
Apr 04 13:24:50.92: [ 7173]: USE page width 1728 pixels in 215 mm
Apr 04 13:24:50.92: [ 7173]: USE unlimited page length
Apr 04 13:24:50.92: [ 7173]: USE 7.7 line/mm
Apr 04 13:24:50.92: [ 7173]: USE 1-D MR
Apr 04 13:24:50.92: [ 7173]: SEND training at v.29 9600 bit/s
Apr 04 13:24:50.92: [ 7173]: <-- [9:AT+FTH=3\r]
Apr 04 13:24:50.97: [ 7173]: --> [7:CONNECT]
Apr 04 13:24:50.97: [ 7173]: <-- data [23]
Apr 04 13:24:50.97: [ 7173]: <-- data [2]
Apr 04 13:24:52.76: [ 7173]: --> [7:CONNECT]
Apr 04 13:24:52.76: [ 7173]: <-- data [6]
Apr 04 13:24:52.76: [ 7173]: <-- data [2]
Apr 04 13:24:53.19: [ 7173]: --> [2:OK]
Apr 04 13:24:53.19: [ 7173]: <-- [9:AT+FTS=7\r]
Apr 04 13:24:53.28: [ 7173]: --> [2:OK]
Apr 04 13:24:53.28: [ 7173]: <-- [10:AT+FTM=96\r]
Apr 04 13:24:53.34: [ 7173]: --> [7:CONNECT]
Apr 04 13:24:53.34: [ 7173]: <-- data [1024]
Apr 04 13:24:53.34: [ 7173]: <-- data [776]
Apr 04 13:24:53.34: [ 7173]: <-- data [2]
Apr 04 13:24:55.30: [ 7173]: --> [2:OK]
Apr 04 13:24:55.30: [ 7173]: <-- [9:AT+FRH=3\r]
Apr 04 13:24:55.93: [ 7173]: --> [7:CONNECT]
Apr 04 13:24:56.85: [ 7173]: --> [2:OK]
Apr 04 13:24:56.85: [ 7173]: TRAINING succeeded
Apr 04 13:24:56.85: [ 7173]: DELAY 75 ms
Apr 04 13:24:56.93: [ 7173]: <-- [10:AT+FTM=96\r]
Apr 04 13:24:56.99: [ 7173]: --> [7:CONNECT]
Apr 04 13:24:56.99: [ 7173]: SEND begin page
Apr 04 13:24:56.99: [ 7173]: <-- data [1029]
Apr 04 13:24:56.99: [ 7173]: <-- data [1024]
Apr 04 13:24:56.99: [ 7173]: <-- data [1024]
Apr 04 13:24:56.99: [ 7173]: <-- data [1025]
Apr 04 13:24:56.99: [ 7173]: <-- data [311]
Apr 04 13:24:58.36: [ 7173]: SENT 4405 bytes of data
Apr 04 13:24:58.36: [ 7173]: SEND 1D RTC
Apr 04 13:24:58.36: [ 7173]: <-- data [29]
Apr 04 13:24:58.36: [ 7173]: <-- data [2]
Apr 04 13:24:58.36: [ 7173]: SEND end page
Apr 04 13:25:01.14: [ 7173]: --> [2:OK]
Apr 04 13:25:01.14: [ 7173]: <-- [9:AT+FTS=9\r]
Apr 04 13:25:01.26: [ 7173]: --> [2:OK]
Apr 04 13:25:01.26: [ 7173]: SEND send EOP (no more pages or documents)
Apr 04 13:25:01.26: [ 7173]: <-- [9:AT+FTH=3\r]
Apr 04 13:25:01.31: [ 7173]: --> [7:CONNECT]
Apr 04 13:25:01.31: [ 7173]: <-- data [3]
Apr 04 13:25:01.31: [ 7173]: <-- data [2]
Apr 04 13:25:02.63: [ 7173]: --> [2:OK]
Apr 04 13:25:02.63: [ 7173]: <-- [9:AT+FRH=3\r]
Apr 04 13:25:03.23: [ 7173]: --> [7:CONNECT]
Apr 04 13:25:04.14: [ 7173]: --> [2:OK]
Apr 04 13:25:04.14: [ 7173]: SEND recv MCF (message confirmation)
Apr 04 13:25:04.14: [ 7173]: SEND FAX (00003694): FROM xxxxxxx TO xxxxxx
(page 1 of 1 sent in 0:14)
Apr 04 13:25:04.14: [ 7173]: SEND FAX (00003694): FROM xxxxx TO xxxxxx
(docq/doc1750.ps;01 sent in 0:14)
Apr 04 13:25:04.14: [ 7173]: <-- [9:AT+FTH=3\r]
Apr 04 13:25:04.19: [ 7173]: --> [7:CONNECT]
Apr 04 13:25:04.19: [ 7173]: <-- data [3]
Apr 04 13:25:04.19: [ 7173]: <-- data [2]
Apr 04 13:25:05.51: [ 7173]: --> [2:OK]
Apr 04 13:25:05.51: [ 7173]: <-- [5:ATH0\r]
Apr 04 13:25:07.44: [ 7173]: --> [2:OK]
Apr 04 13:25:07.44: [ 7173]: SESSION END

Pedro Roçadas (procadas@creditus.pt)
Dptº Informática,BPN-Créditus Technical Staff


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null