Re: [hylafax-users] Enconding 2DMR but needed 1DMR

[procadas@creditus.pt]

Well, here is the log after a test using sendfax in the shell with -1
option

With 1DMR

Mar 26 16:40:06.22: [17620]: SEND file "docq/doc574.ps;01"
Mar 26 16:40:06.22: [17620]: USE page width 1728 pixels in 215 mm
Mar 26 16:40:06.23: [17620]: USE unlimited page length
Mar 26 16:40:06.23: [17620]: USE 7.7 line/mm
Mar 26 16:40:06.23: [17620]: USE 1-D MR
Mar 26 16:40:06.23: [17620]: SEND training at v.29 9600 bit/s
Mar 26 16:40:06.23: [17620]: <-- [9:AT+FTH=3\r]
Mar 26 16:40:06.28: [17620]: --> [7:CONNECT]
Mar 26 16:40:06.28: [17620]: <-- data [23]
Mar 26 16:40:06.28: [17620]: <-- data [2]
Mar 26 16:40:08.06: [17620]: --> [7:CONNECT]
Mar 26 16:40:08.06: [17620]: <-- data [6]
Mar 26 16:40:08.06: [17620]: <-- data [2]

With 2DMR:

Mar 26 11:08:35.21: [ 4402]: SEND file "docq/doc424.ps;40"
Mar 26 11:08:35.22: [ 4402]: Document was encoded with 2DMR, but client
does not support this data format
Mar 26 11:08:35.22: [ 4402]: <-- [9:AT+FTH=3\r]
Mar 26 11:08:35.26: [ 4402]: --> [7:CONNECT]
Mar 26 11:08:35.26: [ 4402]: <-- data [3]
Mar 26 11:08:35.26: [ 4402]: <-- data [2]
Mar 26 11:08:36.58: [ 4402]: --> [2:OK]
Mar 26 11:08:36.58: [ 4402]: <-- [5:ATH0\r]
Mar 26 11:08:38.51: [ 4402]: --> [2:OK]
Mar 26 11:08:38.51: [ 4402]: SESSION END

I make a test without -1 option and the fax fails...

Pedro Ro�adas (procadas@creditus.pt)
Dpt� Inform�tica,BPN-Cr�ditus Technical Staff


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null