HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] Remote fax disconnect prematurely



On 2002.03.19 10:06 Osvaldo Lucchini wrote:
> Hi all of you.
> 
> As requested by Lee, I send the full log of the problem.
> Here the description:
> After sending a fax, the finale status indicate the error in the subject,
> even if the final destination seems to have received the document 
> completely.
> 
> Here the log:
> Mar 19 12:14:00.82: [19397]: SESSION BEGIN 00000021 39020521873753
> Mar 19 12:14:00.82: [19397]: HylaFAX (tm) Version 4.1.1
> Mar 19 12:14:00.82: [19397]: SEND FAX: JOB 18 DEST 0521873753 COMMID 
> 00000021 DEVICE '/dev/ttyS0'
....
> Mar 19 12:14:31.46: [19397]: REMOTE NSF "59 01 02 41 5A 2E 41 47 2E 43 
> 41 27 42 41 53 53 41 20 20 20 20 20 20 CC 00 05 00"
> Mar 19 12:14:31.46: [19397]: NSF remote fax equipment: unknown
> Mar 19 12:14:31.46: [19397]: NSF possible remote station ID: 
> "AZ.AG.CA'BASSA   "
....
> Mar 19 12:14:54.35: [19397]: REMOTE CSI "+39 521 873753"
> Mar 19 12:14:54.35: [19397]: <-- [9:AT+FRH=3\r]
> Mar 19 12:14:54.38: [19397]: --> [7:CONNECT]
> Mar 19 12:14:54.62: [19397]: --> HDLC<9:FF C8 01 00 72 1D 20 55 46>
> Mar 19 12:14:54.62: [19397]: --> [2:OK]
> Mar 19 12:14:54.62: [19397]: <-- [9:AT+FTH=3\r]
> Mar 19 12:14:54.66: [19397]: --> [7:CONNECT]
> Mar 19 12:14:54.66: [19397]: <-- HDLC<3:FF C8 DF>
> Mar 19 12:14:54.66: [19397]: <-- data [3]
> Mar 19 12:14:54.66: [19397]: <-- data [2]
> Mar 19 12:14:55.40: [19397]: --> [2:OK]
> Mar 19 12:14:55.40: [19397]: MODEM input buffering enabled
> Mar 19 12:14:55.40: [19397]: <-- [5:ATH0\r]
> Mar 19 12:14:55.56: [19397]: --> [2:OK]
> Mar 19 12:14:55.56: [19397]: MODEM set DTR OFF
> Mar 19 12:14:55.56: [19397]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 
> 5)
> Mar 19 12:14:55.56: [19397]: SESSION END
> 
> 
> Hylafax 4.1.1
> RH Linux 7.1 - kernel 2.4.2.-2
> Standard Hayes-AT compatible Class 1 modem/fax.
> ("1.0" is all that I've from ati0, sorry).

The systems aren't training properly, so the remote disconnects.

Does this happen with every destination or just with this one recipient?  
What is the brand and model of the fax machine at the recipient end?

Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null




Project hosted by iFAX Solutions