Re: [hylafax-users] mps,rtn, canon fax machines

[dobos_s@ibcnet.hu]

As You can see below I reinstalled the FTS patch (with the "failed->retry
patchpatch :-)), and
set the RTNHandlingMethod to Ignore.

The fax failed, the remote didnt got anything, FaxQueuer notified me that
fax failed.

What should I do next?

PLEASE DONT SAY YOU ARE PUZZLED!

Dobos Sandor
IBCnet Hungary Ltd.



----- Forwarded by Sándor Dobos/IBCnet-HU/IBCGroup on 2002.03.01 12:40
-----

Your facsimile job to 3689632 failed because:
    Internal botch; bad post-page handling string ""

    ---- Transcript of session follows ----

Mar 01 11:14:33.10: [19772]: SESSION BEGIN 00004358 3613689632
Mar 01 11:14:33.10: [19772]: HylaFAX (tm) Version 4.1
Mar 01 11:14:33.10: [19772]: SEND FAX: JOB 189 DEST 3689632 COMMID 00004358
Mar 01 11:14:33.10: [19772]: DEVICE '/dev/ttyS0'
Mar 01 11:14:33.10: [19772]: DELAY 75 ms
Mar 01 11:14:33.18: [19772]: DELAY 2600 ms
Mar 01 11:14:35.78: [19772]: <-- [4:ATZ\r]
Mar 01 11:14:35.85: [19772]: --> [2:OK]
Mar 01 11:14:35.85: [19772]: <-- [5:AT&F\r]
Mar 01 11:14:35.86: [19772]: --> [4:AT&F]
Mar 01 11:14:35.86: [19772]: --> [2:OK]
Mar 01 11:14:35.86: [19772]: <-- [5:ATE0\r]
Mar 01 11:14:35.87: [19772]: --> [4:ATE0]
Mar 01 11:14:35.87: [19772]: --> [2:OK]
Mar 01 11:14:35.87: [19772]: <-- [5:ATV1\r]
Mar 01 11:14:35.88: [19772]: --> [2:OK]
Mar 01 11:14:35.88: [19772]: <-- [5:ATQ0\r]
Mar 01 11:14:35.89: [19772]: --> [2:OK]
Mar 01 11:14:35.89: [19772]: <-- [7:ATS0=0\r]
Mar 01 11:14:35.90: [19772]: --> [2:OK]
Mar 01 11:14:35.90: [19772]: <-- [7:ATS8=2\r]
Mar 01 11:14:35.91: [19772]: --> [2:OK]
Mar 01 11:14:35.91: [19772]: <-- [8:ATS7=60\r]
Mar 01 11:14:35.92: [19772]: --> [2:OK]
Mar 01 11:14:35.92: [19772]: <-- [6:AT&K3\r]
Mar 01 11:14:35.93: [19772]: --> [2:OK]
Mar 01 11:14:35.93: [19772]: <-- [6:AT&D2\r]
Mar 01 11:14:35.94: [19772]: --> [2:OK]
Mar 01 11:14:35.94: [19772]: <-- [6:AT&C1\r]
Mar 01 11:14:35.95: [19772]: --> [2:OK]
Mar 01 11:14:35.95: [19772]: <-- [12:AT+FCLASS=1\r]
Mar 01 11:14:35.96: [19772]: --> [2:OK]
Mar 01 11:14:35.96: [19772]: <-- [19:AT+FCLASS=0;+FAE=1\r]
Mar 01 11:14:35.97: [19772]: --> [2:OK]
Mar 01 11:14:35.97: [19772]: <-- [5:ATM0\r]
Mar 01 11:14:35.98: [19772]: --> [2:OK]
Mar 01 11:14:35.98: [19772]: <-- [12:AT+FCLASS=1\r]
Mar 01 11:14:36.09: [19772]: --> [2:OK]
Mar 01 11:14:36.09: [19772]: DIAL 3689632
Mar 01 11:14:36.09: [19772]: <-- [14:ATDT0,3689632\r]
Mar 01 11:14:54.49: [19772]: --> [7:CONNECT]
Mar 01 11:14:56.27: [19772]: --> [2:OK]
Mar 01 11:14:56.27: [19772]: REMOTE NSF "00 00 11 80 00 8A 49 10 42 4D 46
20 4E 49 4B 20 20 20 20 20 20 20 20 20 00 59 00 80 80 D8 86 01 01 01 01 00
BB"
Mar 01 11:14:56.27: [19772]: NSF remote fax equipment: Canon
Mar 01 11:14:56.27: [19772]: NSF remote station ID: "BMF NIK         "
Mar 01 11:14:56.27: [19772]: <-- [9:AT+FRH=3\r]
Mar 01 11:14:56.28: [19772]: --> [7:CONNECT]
Mar 01 11:14:56.96: [19772]: --> [2:OK]
Mar 01 11:14:56.96: [19772]: REMOTE CSI "+36 1 368 9632"
Mar 01 11:14:56.96: [19772]: <-- [9:AT+FRH=3\r]
Mar 01 11:14:56.97: [19772]: --> [7:CONNECT]
Mar 01 11:14:57.23: [19772]: --> [2:OK]
Mar 01 11:14:57.23: [19772]: REMOTE best rate 14400 bit/s
Mar 01 11:14:57.23: [19772]: REMOTE max page width 1728 pixels in 215 mm
Mar 01 11:14:57.23: [19772]: REMOTE max unlimited page length
Mar 01 11:14:57.23: [19772]: REMOTE best vres 7.7 line/mm
Mar 01 11:14:57.23: [19772]: REMOTE best format 2-D MMR
Mar 01 11:14:57.23: [19772]: REMOTE supports T.30 Annex A, ECM
Mar 01 11:14:57.23: [19772]: REMOTE best 10 ms/scanline
Mar 01 11:14:57.23: [19772]: USE 14400 bit/s
Mar 01 11:14:57.23: [19772]: USE 10 ms/scanline
Mar 01 11:14:57.23: [19772]: SEND file "docq/doc189.ps;40"
Mar 01 11:14:57.23: [19772]: USE page width 1728 pixels in 215 mm
Mar 01 11:14:57.23: [19772]: USE unlimited page length
Mar 01 11:14:57.23: [19772]: USE 3.85 line/mm
Mar 01 11:14:57.23: [19772]: USE 2-D MR
Mar 01 11:14:57.23: [19772]: SEND training at v.17 14400 bit/s
Mar 01 11:14:57.24: [19772]: <-- [9:AT+FTH=3\r]
Mar 01 11:14:57.26: [19772]: --> [7:CONNECT]
Mar 01 11:14:59.05: [19772]: --> [7:CONNECT]
Mar 01 11:14:59.49: [19772]: --> [2:OK]
Mar 01 11:14:59.49: [19772]: <-- [9:AT+FTS=7\r]
Mar 01 11:14:59.57: [19772]: --> [2:OK]
Mar 01 11:14:59.57: [19772]: <-- [11:AT+FTM=145\r]
Mar 01 11:14:59.60: [19772]: --> [7:CONNECT]
Mar 01 11:15:02.71: [19772]: --> [2:OK]
Mar 01 11:15:02.71: [19772]: <-- [9:AT+FRH=3\r]
Mar 01 11:15:03.10: [19772]: --> [7:CONNECT]
Mar 01 11:15:03.99: [19772]: --> [2:OK]
Mar 01 11:15:03.99: [19772]: TRAINING succeeded
Mar 01 11:15:03.99: [19772]: <-- [11:AT+FTM=146\r]
Mar 01 11:15:04.02: [19772]: --> [7:CONNECT]
Mar 01 11:15:04.02: [19772]: SEND begin page
Mar 01 11:15:05.93: [19772]: SENT 7679 bytes of data
Mar 01 11:15:05.93: [19772]: SEND 2D RTC
Mar 01 11:15:05.93: [19772]: SEND end page
Mar 01 11:15:08.67: [19772]: --> [2:OK]
Mar 01 11:15:08.67: [19772]: <-- [9:AT+FTS=9\r]
Mar 01 11:15:08.77: [19772]: --> [2:OK]
Mar 01 11:15:08.77: [19772]: SEND send EOP (no more pages or documents)
Mar 01 11:15:08.77: [19772]: <-- [9:AT+FTH=3\r]
Mar 01 11:15:08.80: [19772]: --> [7:CONNECT]
Mar 01 11:15:10.12: [19772]: --> [2:OK]
Mar 01 11:15:10.12: [19772]: <-- [9:AT+FRH=3\r]
Mar 01 11:15:10.48: [19772]: --> [7:CONNECT]
Mar 01 11:15:11.24: [19772]: --> [2:OK]
Mar 01 11:15:11.24: [19772]: SEND recv RTN (retrain negative)
Mar 01 11:15:11.25: [19772]: SEND FAX (00004358): FROM x TO 3689632 (page 1
of 1 sent in 0:14)
Mar 01 11:15:11.25: [19772]: SEND training at v.17 12000 bit/s
Mar 01 11:15:11.25: [19772]: <-- [9:AT+FTH=3\r]
Mar 01 11:15:11.29: [19772]: --> [7:CONNECT]
Mar 01 11:15:13.08: [19772]: --> [7:CONNECT]
Mar 01 11:15:13.52: [19772]: --> [2:OK]
Mar 01 11:15:13.52: [19772]: <-- [9:AT+FTS=7\r]
Mar 01 11:15:13.60: [19772]: --> [2:OK]
Mar 01 11:15:13.60: [19772]: <-- [11:AT+FTM=121\r]
Mar 01 11:15:13.63: [19772]: --> [7:CONNECT]
Mar 01 11:15:16.75: [19772]: --> [2:OK]
Mar 01 11:15:16.75: [19772]: <-- [9:AT+FRH=3\r]
Mar 01 11:15:17.11: [19772]: --> [7:CONNECT]
Mar 01 11:15:18.03: [19772]: --> [2:OK]
Mar 01 11:15:18.03: [19772]: TRAINING succeeded
Mar 01 11:15:18.03: [19772]: <-- [11:AT+FTM=122\r]
Mar 01 11:15:18.06: [19772]: --> [7:CONNECT]
Mar 01 11:15:18.06: [19772]: SEND begin page
Mar 01 11:15:26.78: [19772]: SENT 17185 bytes of data
Mar 01 11:15:28.33: [19772]: SENT 2475 bytes of data
Mar 01 11:15:28.33: [19772]: SEND 2D RTC
Mar 01 11:15:28.33: [19772]: SEND end page
Mar 01 11:15:31.55: [19772]: --> [2:OK]
Mar 01 11:15:31.55: [19772]: <-- [9:AT+FTH=3\r]
Mar 01 11:15:31.58: [19772]: --> [7:CONNECT]
Mar 01 11:15:32.90: [19772]: --> [2:OK]
Mar 01 11:15:32.90: [19772]: <-- [5:ATH0\r]
Mar 01 11:15:33.77: [19772]: --> [2:OK]
Mar 01 11:15:33.77: [19772]: SESSION END

    ---- Unsent job status ----

   Destination: 3689632
         JobID: 189
       GroupID: 189
        Sender: x
      Mailaddr: x
        CommID: 00004358
Submitted From: localhost
    Page Width: 209 (mm)
   Page Length: 296 (mm)
    Resolution: 98 (lpi)
        Status: Internal botch; bad post-page handling string ""
       Dialogs: 1 (exchanges with remote device)
         Dials: 0 (consecutive failed calls to destination)
         Calls: 1 (total phone calls placed)
         Pages: 1 (pages transmitted)
      TotPages: 1 (total pages to transmit)
      Attempts: 0 (attempts to send current page)
        Dirnum: 0 (directory of next page to send)

    ---- Documents submitted for transmission ----

The following documents were submitted for transmission and are
available on the server for reuse until they are automatically
purged when this job is removed.  Documents may also be manually
removed using the faxrm command; consult faxrm(1) for information.

Filename                 Size Type
docq/doc189.ps           6055 PostScript




____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null