Re: [hylafax-users] Efficient mass faxing w. no cover page

["Sedat Yilmazer" <sedat@kibele.com>]

 Another solution could be to modify the faxsend. (cp the original to
faxsend.original), deplace it with a script that checks the destination
number. Make your lists 2 or 3 digit numbers. If the destination is a
2/3 digit number, get your broadcast/phonebook script to generate faxes
to your destinations  via sendfax. If the destination is not 2/3 digit
number then assume normal faxing and activate the faxsend.original

Sedat YILMAZER


-----Original Message-----
From: hylafax-users-bounce@hylafax.org
[mailto:hylafax-users-bounce@hylafax.org] On Behalf Of Daniel Dumitriu
Sent: Thursday, January 10, 2002 11:51 PM
To: Lee Howard
Cc: hylafax-users@hylafax.org; joe.phillips@innovationsw.com
Subject: Re: [hylafax-users] Efficient mass faxing w. no cover page

Thanks, everyone.

This has cooled me down a bit. I understand how this might not be very 
important for most people. After all, we don't, generally, fax thousands

of people each day. Except for some businesses that actually rely on
this.

Unfortunately, I will have to leave things the way they are, and have a 
separate copy of the document queued for each destination.
My problem with this is not the disk space being wasted. The problem is 
that the clients take forever to spool a the same document to thousands 
of destinations. I was looking into ways to trim that waiting time down 
a bit.

As for outsourcing the development of a custom client, I'm afraid that 
it is not an option, at least not at this point.

Since my system must serve a few people that submit a relatively small 
number of documents from their Windows workstations to be transmitted to

thousands of numbers grouped in three or four "phone books",
my solution is going to be something along the following ideas:

- define a "virtual" printer associated with each "phone book". Each 
such printer will consist of an interface script that cycles through the

destinations in the phone book and spools the faxes.
- export/share the printers using Samba

That's it. Unfortunately I cannot put much time into this.
Many thanks to all that answered my question,

Daniel



Lee Howard wrote:

>Quoting Daniel Dumitriu <ddumitriu@conquestvacations.com>:
>
>>Hello,
>>
>>This may very well be an oversight of mine (or something), but I'm no 
>>able to figure this one out:
>>
>>How can I send the same document/set of documents to 1000 (one
thousand)
>>
>>or more destinations, with no cover page  and *without* creating a new
>>
>>copy of the document in the docq ? Links (preferably symbolic) would
be
>>ok.
>>
>>I have the feeling this must be explained somewhere in the manuals,
the
>>
>>how-tos or the mailing list, because this is the basic fax
broadcasting
>>
>>case. I just seem to be unable to find it.
>>
>>Could anyone help ?
>>
>
>If you run a faxing loop script that does this:
>
>sendfax -d 1111111 my_file.ps
>sendfax -d 2222222 my_file.ps
>sendfax -d 3333333 my_file.ps
>
>you will get multiple copies of the docq files.
>
>If you run you fax like this:
>
>sendfax -d 1111111 -d 2222222 -d 3333333 my_file.ps
>
>Then you will only end up with one copy of the files in the docq.
Writing
>scripts like the first one is much easier, and for most people, the
disk space
>isn't a concern.
>
>Lee.
>
>




____________________ HylaFAX(tm) Users Mailing List
_______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org <
/dev/null



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null