![]() |
I had lots of problems with a USRobotics 56k Fax Modem in Class2.0 You can try these things and see if it works any better: 1) Disable copy-quality since modem doesn't really support it very well. MaxConsecutiveBadLines: 0 PercentGoodLines: 0 2) Disable adaptive-answering (handshaking problems with some fax machines) AdaptiveAnswer: No ModemSetupAACmd: AT+FAA=0 3) Put a delay between the AT commands (problems with signal detect) ModemATCmdDelay: 100 4) Put an X3 instead of X4 (problems with signal detect) ModemResultCodesCmd: ATQ0X3 Although these changes made it work much better I continued to have problems with some economical FAX telephones and so I decided to configure the modem in Class1 by running faxaddmodem again and chosing Class1. This seems to work much better !! Simon Bridgwater TC SISTEMA - Brescia Italy -----Original Message----- From: Shailendra Mehta Sent: Thu 1/10/2002 11:38 AM To: hylafax (E-mail) Cc: Subject: [hylafax-users] US robotics class2.0 modem error detected without successful handshake Hi all, I am using hylafax beta 3version on redhat 7.0. I am using US robotics modem in class 2.0 modem. I am not able to receive faxes on it it gives following error in log file: Jan 10 20:17:51.95: [ 375]: SESSION BEGIN 00000002 91832257464 Jan 10 20:17:51.95: [ 375]: <-- [4:ATA\r] Jan 10 20:18:45.39: [ 375]: --> [10:NO CARRIER] Jan 10 20:18:45.39: [ 375]: ANSWER: Ring detected without successful handshake Jan 10 20:18:45.39: [ 375]: SESSION END Can anybody help me? --Shailendra S. Mehta Senior Engineer (Design & Development), TATA Infotech Ltd, Mapusa-GOA. ____________________ HylaFAX(tm) Users Mailing List _______________________ To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null ____________________ HylaFAX(tm) Users Mailing List _______________________ To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null